This work was concerned with the design and construction of an exercise cycle with power generator resistance as load for aerobic exercise. The cycle was designed based on the operational requirements of the cycle. The structure support base was constructed using the electric arc welding technique, while the structure frame parts were assembled together on the base support with the aid of bolt and nut joint technique. The generator was placed in contact with cycle wheel and its output terminals connected to a wet cell battery. An ergo-metric experiment was carried out using the cycle with a user weighing 71.6 kg. The rider pedaled for exercise uninterruptedly for 10 minutes at the lowest speed of 72 rpm. The output voltage and current of the power generator were then read using multi-meter. The values were used to evaluate the electromagnetic resistance developed in the rotating armature of the power generator using relevant equations. The relationship between the resistance developed and other performance parameters were also identified and established. The experiment was repeated at various speeds and the corresponding resistance identified. These results collected were tabulated and their analysis with other measuring pairs established. The analysis shows that: the performance parameters varied directly proportional with the electromagnetic resistance; this validate the variability of the resistance mechanism. The exercise efficiency at various speeds does not vary distinctly from 51%; this indicates that the pedaling speed of 72 rpm is appropriate for exercise using this cycle. The total calories burnt (671.1 Kcal) conform to the acceptable standard range (70 Kcal – 1500Kcal) per day; it therefore validates the function of this exercise device as appropriate for aerobic exercise.
| Published in | Advances in Bioscience and Bioengineering (Volume 5, Issue 4) |
| DOI | 10.11648/j.abb.20170504.12 |
| Page(s) | 56-62 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Exercise Cycle, Power Generator, Electromagnetic Resistance, Wet-Cell Battery, Calorie Burnt
| [1] | Ainsworth, B. E., Haskell, W. L., Whitt, M. C., Irwin, M. L., Swartz, A. M., Strath, S. J., O’brien, W. L., Bassett, D. R. Jr., Schmitz, K. H., Emplaincourt, P. O., Jacobs, D. R. Jr. and Leon, A. S. (2011). Compendium of Physical Activities. A Second Update of Codes and MET Values. Journal of Medicine and Science in Sports and Exercise, 43 (12): S 1575. |
| [2] | Alexander X. (2010). Design of a New Bicycle Ergometer. Wolfson Schoolof Mechanical & Manufacturing Engineering, Loughborough University. |
| [3] | Asuero, A. G., Sayago, A. and Gonzalez, A. G. (2006). The CorrelationCoefficient: An Overview. Journal of Critical Review in Analytical Chemistry, 36 (8): 41-59. |
| [4] | Carole, A., Conn, R. D. and Kravitz, L. (2014). Remarkable Calorie. Journal of Exercise & Sports. 3 (10). 9-10. |
| [5] | Chritianne, F., Flavia, C. Lemos M., Fabricio, C. P., Ravagnani, F., Homero P. B., Roberto C. B. (2013). Estimation of the Metabolic Equivalent (MET) of an Exercise Protocol based on Indirect Calorimetry; Journal of Exercise and Sports Sciences. 19 (2): pp 28. |
| [6] | Fisher, J., Steele, J., Bruce-Low, S., Smith, D. (2011). Evidence Based Resistance. |
| [7] | Gibson, T. (2011). Turning Sweat into Watts. Spectrum, IEEE, 48 (7): 50 -55. |
| [8] | Hamilton, C. (2010). Bicycle Trainer with Variable Resistance to Pedalling. US patent, US0062908A1. |
| [9] | Jorgustine, K. (2015). Battery State of Charge for Voltage and Specific Gravity. www.modernsurvivalblog.com. |
| [10] | Livermore, C., Henrik S., James W. Jr. and Simona S. (2006). Mechanics and Materials. John Willey and Son Inc., pp 43. ISBN 1-523-64417-7. |
| [11] | McColligan, M. and Henderson, N. (2009). Blackburn Trainers White Paper Abstract (online), www.blackburndesign.com/blackburn_techTrainers_pdf. |
| [12] | Michael, R. (2013). Resistance Training for Health and Fitness; America College of Sport Medicine, www.acsm.org. |
| [13] | William, D. M., Frank, I. K., Victoria L. K. (2006). Essentials of Exercise Physiology. Lippincott Williams & wikkins. P 204 ISBN 978-0-7827-4991-6. |
| [14] | Wilson, D. G., Jim, P. (2004). Bicycling Science. Massachusetts Institute of Technology, 343(5): ISBN 0-262-23111-5. Training Recommendation. Journal of Medicina Sportiva. 15 (3): 147-162. |
APA Style
Ominyi Daniel Sunday, Amah Alexander Nwabueze, Ahemen Iorkya, Agada Inikpi Ojochenemi. (2017). Design and Construction of a Cycle with Power Generator Resistance as Load for Aerobic Exercise. Advances in Bioscience and Bioengineering, 5(4), 56-62. https://doi.org/10.11648/j.abb.20170504.12
ACS Style
Ominyi Daniel Sunday; Amah Alexander Nwabueze; Ahemen Iorkya; Agada Inikpi Ojochenemi. Design and Construction of a Cycle with Power Generator Resistance as Load for Aerobic Exercise. Adv. BioSci. Bioeng. 2017, 5(4), 56-62. doi: 10.11648/j.abb.20170504.12
AMA Style
Ominyi Daniel Sunday, Amah Alexander Nwabueze, Ahemen Iorkya, Agada Inikpi Ojochenemi. Design and Construction of a Cycle with Power Generator Resistance as Load for Aerobic Exercise. Adv BioSci Bioeng. 2017;5(4):56-62. doi: 10.11648/j.abb.20170504.12
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.abb.20170504.12,
author = {Ominyi Daniel Sunday and Amah Alexander Nwabueze and Ahemen Iorkya and Agada Inikpi Ojochenemi},
title = {Design and Construction of a Cycle with Power Generator Resistance as Load for Aerobic Exercise},
journal = {Advances in Bioscience and Bioengineering},
volume = {5},
number = {4},
pages = {56-62},
doi = {10.11648/j.abb.20170504.12},
url = {https://doi.org/10.11648/j.abb.20170504.12},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.abb.20170504.12},
abstract = {This work was concerned with the design and construction of an exercise cycle with power generator resistance as load for aerobic exercise. The cycle was designed based on the operational requirements of the cycle. The structure support base was constructed using the electric arc welding technique, while the structure frame parts were assembled together on the base support with the aid of bolt and nut joint technique. The generator was placed in contact with cycle wheel and its output terminals connected to a wet cell battery. An ergo-metric experiment was carried out using the cycle with a user weighing 71.6 kg. The rider pedaled for exercise uninterruptedly for 10 minutes at the lowest speed of 72 rpm. The output voltage and current of the power generator were then read using multi-meter. The values were used to evaluate the electromagnetic resistance developed in the rotating armature of the power generator using relevant equations. The relationship between the resistance developed and other performance parameters were also identified and established. The experiment was repeated at various speeds and the corresponding resistance identified. These results collected were tabulated and their analysis with other measuring pairs established. The analysis shows that: the performance parameters varied directly proportional with the electromagnetic resistance; this validate the variability of the resistance mechanism. The exercise efficiency at various speeds does not vary distinctly from 51%; this indicates that the pedaling speed of 72 rpm is appropriate for exercise using this cycle. The total calories burnt (671.1 Kcal) conform to the acceptable standard range (70 Kcal – 1500Kcal) per day; it therefore validates the function of this exercise device as appropriate for aerobic exercise.},
year = {2017}
}
TY - JOUR T1 - Design and Construction of a Cycle with Power Generator Resistance as Load for Aerobic Exercise AU - Ominyi Daniel Sunday AU - Amah Alexander Nwabueze AU - Ahemen Iorkya AU - Agada Inikpi Ojochenemi Y1 - 2017/10/19 PY - 2017 N1 - https://doi.org/10.11648/j.abb.20170504.12 DO - 10.11648/j.abb.20170504.12 T2 - Advances in Bioscience and Bioengineering JF - Advances in Bioscience and Bioengineering JO - Advances in Bioscience and Bioengineering SP - 56 EP - 62 PB - Science Publishing Group SN - 2330-4162 UR - https://doi.org/10.11648/j.abb.20170504.12 AB - This work was concerned with the design and construction of an exercise cycle with power generator resistance as load for aerobic exercise. The cycle was designed based on the operational requirements of the cycle. The structure support base was constructed using the electric arc welding technique, while the structure frame parts were assembled together on the base support with the aid of bolt and nut joint technique. The generator was placed in contact with cycle wheel and its output terminals connected to a wet cell battery. An ergo-metric experiment was carried out using the cycle with a user weighing 71.6 kg. The rider pedaled for exercise uninterruptedly for 10 minutes at the lowest speed of 72 rpm. The output voltage and current of the power generator were then read using multi-meter. The values were used to evaluate the electromagnetic resistance developed in the rotating armature of the power generator using relevant equations. The relationship between the resistance developed and other performance parameters were also identified and established. The experiment was repeated at various speeds and the corresponding resistance identified. These results collected were tabulated and their analysis with other measuring pairs established. The analysis shows that: the performance parameters varied directly proportional with the electromagnetic resistance; this validate the variability of the resistance mechanism. The exercise efficiency at various speeds does not vary distinctly from 51%; this indicates that the pedaling speed of 72 rpm is appropriate for exercise using this cycle. The total calories burnt (671.1 Kcal) conform to the acceptable standard range (70 Kcal – 1500Kcal) per day; it therefore validates the function of this exercise device as appropriate for aerobic exercise. VL - 5 IS - 4 ER -
Information
Email: