Production and Characterization of Bio Oil from Bamboo

Igbagara Princewill Woyinbrakemi; Akpa Jackson Gunorubon; Adeloye Olalekan Michael

doi:doi:10.11648/j.ajche.20210906.11

| Peer-Reviewed

Production and Characterization of Bio Oil from Bamboo

Igbagara Princewill Woyinbrakemi, Akpa Jackson Gunorubon, Adeloye Olalekan Michael

Published in American Journal of Chemical Engineering (Volume 9, Issue 6)

Received: 20 August 2021 Accepted: 4 October 2021 Published: 10 November 2021

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The quest for renewable energy sources have been the major concerns worldwide due to depletion of fossil fuel and ozone layer as a result of fossil fuel combustion. Bio oil or fuel production from different natural plants have been researched over the years in different regions of the world. Thus, this research study focused on production and characterization of bio oil from Nigerian bamboo plant (Ogoni bamboo), which involved fresh bamboo preparation and its pyrolysis and characterization. The fresh bamboo plant was used since it’s not edible unlike other studies that applied edible fruits as source of bio diesel production. The prepared fresh bamboo plant was pyrolysed at a temperature range of 300°C to 600°C and the gaseous products condensed to temperature of 25°C. The applied temperature range was used to evaluate the effect of fast, intermediate and slow pyrolysis, while high yield of bio oil was deduced at 450°C. The produced bio oil was characterized by investigating its density, specific gravity, viscosity with gas chromatography and ASTM distillation D86 analysis carried out on the produced bio oil. The pyrolysis result yielded 59.5wt% of bio oil at reactor bed temperature of 450°C, which is heavy in nature, highly viscous with calorific valuer. Thus, bio oil can be produced from Nigeria bamboo plant as an alternate energy source with further product upgrading process required for effective and commercial use of the produced bamboo bio oil.

Published in	American Journal of Chemical Engineering (Volume 9, Issue 6)
DOI	10.11648/j.ajche.20210906.11
Page(s)	134-140
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Bio-Oil, Bamboo, Pyrolysis, ASTM Distillation, Gas Chromatography

References

[1]	Demirbas, A. (2009). Biofuels: Securing The Planet’s Future Energy Needs. London: Springer -Verlag limited.
[2]	Ragauskas, A. J., Williams, C. K., Davison, B. H., Britovsek, G., Cairney, J., Eckert, C. A., Frederick, W. J., Halett, J. P., Leak, D. J., Liotta, C. L., Mielenz, J. R., Murphy, R., Temple, R. & Tschaplinski, T. (2006). The Path Forward for Biofuels and Biomaterials. Science, 311, 5760, 464-489.
[3]	Khuenkaeo, N., Phromphithak, S., Onsree, T., Naqvi, S. R. & Tippayawong, N. (2021). Production and Characterization of Bio Oils from Fast Pyrolysis of Tobacco Processing Wastes in an Ablative Reactor Under Vacuum. PLoS ONE, 16, 7, e0254485.
[4]	Sun, P., Heng, M., Sun, S. and Chen, J. (2010). Direct Liquefaction in Hot Compressed Water Influence of Catalysts, Energy, 35, 12, 5421-5429.
[5]	Pravakar, M., Part, K. K., Naik, S. V., Das, L. M. & Padyma, V. (2011). Fuel Production from Biomass: Indian Perspective for Pyrolysis. Oil Journal of Scientific & Industrial Research, 70, 668-674.
[6]	Garcia-Numez, J. A., Pelaez-Samaniego, M. R., Garcia-Perez, M. E., Fonts, T., Abrego, J., Weaterhof, R. J. M. & Garcia, P. (2017). Historical Development of Pyrolysis Reactors: A Review. Energy Fuels, 31, 6, 5751-5775.
[7]	Sung-Phil, M., Chang, S. K. & Sang, B. P. (2007). Physio-Chemical Characterization of Pyrolyzates Produced from Carbonization of Lignocellulosic Biomass in a Batch Type Mechanical Kiln. Journal of Industrial Engineering & Chemisry, 13, 127-132.
[8]	Rehnlund, B., Blinge, M., Schramm, J. and Larsen, U. (2007). Synthetic Gasoline And Diesel Oil Produced Fisher-Tropsch Technology- A Possibility For The Future. Atrax Energi, 1-140.
[9]	Luo, G., Chandler, D. S., Anjos, L. C. A., Eng, R. J., Jia, P. & Resende, F. L. P. (2017). Pyrolysis of Whole Wood Chips and Rods in a Novel Ablative Reactor. Fuel, 194, C, 229-238.
[10]	Yufu, X., Xianguo, H., Wendong, L. and Yinyan, S. (2011). Preparation and Characterization of Bio Oil from Biomass. Progress in Biomass and Bioenergy. London: Production, Energy Sustainability and Society.
[11]	Zehui, J., Zhijia, L., Benhua, F., Zhiyong, C., Yan, Y. & Xinge, L. (2012). The Pyrolysis Characteristics of Moso Bamboo. Journal of analytical and applied pyrolysis. 94, 48-52.
[12]	Mohammad, U., H. J., Shazib, U. & Mohammad, N. I. (2015). The Utilization of Waste Date Seed as Bio Oil and Activated Carbon by Pyrolysis Process. Advances in Mechanical Engineering, 2012, 1-6.
[13]	Mohammad, N. I. & Farid, N. A. (1998). Liquid Oil from Fluidized Bed Pyrolysis of Rice Husk Waste and its Characterization. International Energy Journal. 20, 55-65.
[14]	Xioyu, Z., Chunyan, X. & Hongxun, W. (2007). Pretreatment of Bamboo Residues with Coriolus Versicolor for Enzymatic Hydrolysis. Journal of Bioscience and Bioenergy, 104, 2, 149-151.
[15]	Zhang, Q., Chang, J., Warg, T. & Xu, Y. (2007). Review of Biomss Pyrolysis Oil Properties and Upgrading Research. Energy Conversion and Management, 48, 87-92.
[16]	Boateng, A. A., Jung, H. G. & Adier, P. R. (2006). Pyrolysis of Energy Crops including Alfalfa Stems, Reed Canary Grass and Eastern Gama Grass. Fuel. 85, 2450-2457.
[17]	Encinar, J. M., Beltian, F. J., Ramiro, A. & Gonzolez J. F. (1997). Catalysed Pyrolysis of Grap and Baggase Influence of Catalyst Type and Chemical Treatment. Industrial Engineering & Chemistry Research, 36, 4176– 4183.
[18]	Bridgewater, A. V. & Peacocke, G. V. C. (2000). Fast Pyrolysis Processes for Biomass. Revnewable and sustainable Energy Reviews. 4, 71-79.
[19]	Aquino, F. L. (2007). Elucidating the Solid, Liquid and Gaseous Products from Batch Pyrolysis of Cotton-gin Trash. Master of Science thesis, Department of Biological and Agricultural Engineering, University of Philippines, Philippines, Los Barrios.
[20]	Pasha, M. K., Dai, L., Liu, D., Guo, M. & Du, W. (2021). An Overview to Process Design, Simulation and Sustainability Evaluation of Biodiesel Production. Biotechnology for Biofuels, 14, 129.
[21]	Degfie, T. A., Mamo, T. T. & Mekonnen, Y. S. (2019). Optimized Biodiesel Production from Waste Cooking Oil (WCO) Using Calcium Oxide (CaO) Nano Catalyst. Scientific Report, 9, 18982.

Cite This Article

Plain Text BibTeX RIS

APA Style

Igbagara Princewill Woyinbrakemi, Akpa Jackson Gunorubon, Adeloye Olalekan Michael. (2021). Production and Characterization of Bio Oil from Bamboo. American Journal of Chemical Engineering, 9(6), 134-140. https://doi.org/10.11648/j.ajche.20210906.11

Copy | Download

ACS Style

Igbagara Princewill Woyinbrakemi; Akpa Jackson Gunorubon; Adeloye Olalekan Michael. Production and Characterization of Bio Oil from Bamboo. Am. J. Chem. Eng. 2021, 9(6), 134-140. doi: 10.11648/j.ajche.20210906.11

Copy | Download

AMA Style

Igbagara Princewill Woyinbrakemi, Akpa Jackson Gunorubon, Adeloye Olalekan Michael. Production and Characterization of Bio Oil from Bamboo. Am J Chem Eng. 2021;9(6):134-140. doi: 10.11648/j.ajche.20210906.11

Copy | Download

@article{10.11648/j.ajche.20210906.11,
  author = {Igbagara Princewill Woyinbrakemi and Akpa Jackson Gunorubon and Adeloye Olalekan Michael},
  title = {Production and Characterization of Bio Oil from Bamboo},
  journal = {American Journal of Chemical Engineering},
  volume = {9},
  number = {6},
  pages = {134-140},
  doi = {10.11648/j.ajche.20210906.11},
  url = {https://doi.org/10.11648/j.ajche.20210906.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajche.20210906.11},
  abstract = {The quest for renewable energy sources have been the major concerns worldwide due to depletion of fossil fuel and ozone layer as a result of fossil fuel combustion. Bio oil or fuel production from different natural plants have been researched over the years in different regions of the world. Thus, this research study focused on production and characterization of bio oil from Nigerian bamboo plant (Ogoni bamboo), which involved fresh bamboo preparation and its pyrolysis and characterization. The fresh bamboo plant was used since it’s not edible unlike other studies that applied edible fruits as source of bio diesel production. The prepared fresh bamboo plant was pyrolysed at a temperature range of 300°C to 600°C and the gaseous products condensed to temperature of 25°C. The applied temperature range was used to evaluate the effect of fast, intermediate and slow pyrolysis, while high yield of bio oil was deduced at 450°C. The produced bio oil was characterized by investigating its density, specific gravity, viscosity with gas chromatography and ASTM distillation D86 analysis carried out on the produced bio oil. The pyrolysis result yielded 59.5wt% of bio oil at reactor bed temperature of 450°C, which is heavy in nature, highly viscous with calorific valuer. Thus, bio oil can be produced from Nigeria bamboo plant as an alternate energy source with further product upgrading process required for effective and commercial use of the produced bamboo bio oil.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Production and Characterization of Bio Oil from Bamboo
AU  - Igbagara Princewill Woyinbrakemi
AU  - Akpa Jackson Gunorubon
AU  - Adeloye Olalekan Michael
Y1  - 2021/11/10
PY  - 2021
N1  - https://doi.org/10.11648/j.ajche.20210906.11
DO  - 10.11648/j.ajche.20210906.11
T2  - American Journal of Chemical Engineering
JF  - American Journal of Chemical Engineering
JO  - American Journal of Chemical Engineering
SP  - 134
EP  - 140
PB  - Science Publishing Group
SN  - 2330-8613
UR  - https://doi.org/10.11648/j.ajche.20210906.11
AB  - The quest for renewable energy sources have been the major concerns worldwide due to depletion of fossil fuel and ozone layer as a result of fossil fuel combustion. Bio oil or fuel production from different natural plants have been researched over the years in different regions of the world. Thus, this research study focused on production and characterization of bio oil from Nigerian bamboo plant (Ogoni bamboo), which involved fresh bamboo preparation and its pyrolysis and characterization. The fresh bamboo plant was used since it’s not edible unlike other studies that applied edible fruits as source of bio diesel production. The prepared fresh bamboo plant was pyrolysed at a temperature range of 300°C to 600°C and the gaseous products condensed to temperature of 25°C. The applied temperature range was used to evaluate the effect of fast, intermediate and slow pyrolysis, while high yield of bio oil was deduced at 450°C. The produced bio oil was characterized by investigating its density, specific gravity, viscosity with gas chromatography and ASTM distillation D86 analysis carried out on the produced bio oil. The pyrolysis result yielded 59.5wt% of bio oil at reactor bed temperature of 450°C, which is heavy in nature, highly viscous with calorific valuer. Thus, bio oil can be produced from Nigeria bamboo plant as an alternate energy source with further product upgrading process required for effective and commercial use of the produced bamboo bio oil.
VL  - 9
IS  - 6
ER  -

Copy | Download

Author Information

Igbagara Princewill Woyinbrakemi

Department of Chemical Engineering, Federal University of Petroleum Resources, Effurun, Nigeria
Akpa Jackson Gunorubon

Department of Chemical/Petrochemical Engineering, Rivers State University, Port-Harcourt, Nigeria
Adeloye Olalekan Michael

Department of Chemical/Petrochemical Engineering, Rivers State University, Port-Harcourt, Nigeria

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Igbagara Princewill Woyinbrakemi, Akpa Jackson Gunorubon, Adeloye Olalekan Michael. (2021). Production and Characterization of Bio Oil from Bamboo. American Journal of Chemical Engineering, 9(6), 134-140. https://doi.org/10.11648/j.ajche.20210906.11

Copy | Download

ACS Style

Igbagara Princewill Woyinbrakemi; Akpa Jackson Gunorubon; Adeloye Olalekan Michael. Production and Characterization of Bio Oil from Bamboo. Am. J. Chem. Eng. 2021, 9(6), 134-140. doi: 10.11648/j.ajche.20210906.11

Copy | Download

AMA Style

Igbagara Princewill Woyinbrakemi, Akpa Jackson Gunorubon, Adeloye Olalekan Michael. Production and Characterization of Bio Oil from Bamboo. Am J Chem Eng. 2021;9(6):134-140. doi: 10.11648/j.ajche.20210906.11

Copy | Download

@article{10.11648/j.ajche.20210906.11,
  author = {Igbagara Princewill Woyinbrakemi and Akpa Jackson Gunorubon and Adeloye Olalekan Michael},
  title = {Production and Characterization of Bio Oil from Bamboo},
  journal = {American Journal of Chemical Engineering},
  volume = {9},
  number = {6},
  pages = {134-140},
  doi = {10.11648/j.ajche.20210906.11},
  url = {https://doi.org/10.11648/j.ajche.20210906.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajche.20210906.11},
  abstract = {The quest for renewable energy sources have been the major concerns worldwide due to depletion of fossil fuel and ozone layer as a result of fossil fuel combustion. Bio oil or fuel production from different natural plants have been researched over the years in different regions of the world. Thus, this research study focused on production and characterization of bio oil from Nigerian bamboo plant (Ogoni bamboo), which involved fresh bamboo preparation and its pyrolysis and characterization. The fresh bamboo plant was used since it’s not edible unlike other studies that applied edible fruits as source of bio diesel production. The prepared fresh bamboo plant was pyrolysed at a temperature range of 300°C to 600°C and the gaseous products condensed to temperature of 25°C. The applied temperature range was used to evaluate the effect of fast, intermediate and slow pyrolysis, while high yield of bio oil was deduced at 450°C. The produced bio oil was characterized by investigating its density, specific gravity, viscosity with gas chromatography and ASTM distillation D86 analysis carried out on the produced bio oil. The pyrolysis result yielded 59.5wt% of bio oil at reactor bed temperature of 450°C, which is heavy in nature, highly viscous with calorific valuer. Thus, bio oil can be produced from Nigeria bamboo plant as an alternate energy source with further product upgrading process required for effective and commercial use of the produced bamboo bio oil.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Production and Characterization of Bio Oil from Bamboo
AU  - Igbagara Princewill Woyinbrakemi
AU  - Akpa Jackson Gunorubon
AU  - Adeloye Olalekan Michael
Y1  - 2021/11/10
PY  - 2021
N1  - https://doi.org/10.11648/j.ajche.20210906.11
DO  - 10.11648/j.ajche.20210906.11
T2  - American Journal of Chemical Engineering
JF  - American Journal of Chemical Engineering
JO  - American Journal of Chemical Engineering
SP  - 134
EP  - 140
PB  - Science Publishing Group
SN  - 2330-8613
UR  - https://doi.org/10.11648/j.ajche.20210906.11
AB  - The quest for renewable energy sources have been the major concerns worldwide due to depletion of fossil fuel and ozone layer as a result of fossil fuel combustion. Bio oil or fuel production from different natural plants have been researched over the years in different regions of the world. Thus, this research study focused on production and characterization of bio oil from Nigerian bamboo plant (Ogoni bamboo), which involved fresh bamboo preparation and its pyrolysis and characterization. The fresh bamboo plant was used since it’s not edible unlike other studies that applied edible fruits as source of bio diesel production. The prepared fresh bamboo plant was pyrolysed at a temperature range of 300°C to 600°C and the gaseous products condensed to temperature of 25°C. The applied temperature range was used to evaluate the effect of fast, intermediate and slow pyrolysis, while high yield of bio oil was deduced at 450°C. The produced bio oil was characterized by investigating its density, specific gravity, viscosity with gas chromatography and ASTM distillation D86 analysis carried out on the produced bio oil. The pyrolysis result yielded 59.5wt% of bio oil at reactor bed temperature of 450°C, which is heavy in nature, highly viscous with calorific valuer. Thus, bio oil can be produced from Nigeria bamboo plant as an alternate energy source with further product upgrading process required for effective and commercial use of the produced bamboo bio oil.
VL  - 9
IS  - 6
ER  -

Copy | Download