| Peer-Reviewed

Cyclic Voltammetric Studies on Electrocatalytic Reduction of Bisulfite in Aqueous Buffered Solutions Using a Myoglobin / Surfactant Film Electrode

Received: 19 October 2022    Accepted: 3 November 2022    Published: 8 December 2022
Views:       Downloads:
Abstract

Background: The surfactant, didodecyl dimethyl ammonium bromide (DDAB), was used to immobilize myoglobin (Mb) onto glassy carbon (GC) electrode surfaces. The Mb/DDAB film on GC electrode showed good charge transport rates. Objectives: Mb in DDAB was utilised as a redox catalyst for reduction reactions requiring multi-electron transfers. Cyclic voltammetry has proved the Mb modified film electrode to be an effective electrocatalyst for the multi-electron reduction of bisulfite in aqueous buffered solutions. Methods: Using cyclic voltammetry technique, bisulfite reduction was studied at various concentrations and scan rates in different aqueous buffer solutions of various pH. Results: The values of ks of the film and kcat of the catalytic reaction of bisulfite were obtained at different pH values. The variation in the catalytic rate constant values with pH confirmed that the bisulfite is the reactive species. Conclusions: The catalytic bisulfite reduction was an irreversible, diffusion-controlled, and pH dependent process. The reduction of bisulfite by the Mb/DDAB film followed the EC’ catalytic mechanism.

Published in American Journal of Chemical Engineering (Volume 10, Issue 6)
DOI 10.11648/j.ajche.20221006.11
Page(s) 116-120
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Mb/DDAB Film, Glassy Carbon (GC) Electrode, Electrochemical Methods, EC’ Catalytic Mechanism

References
[1] Kuroi, T.; Nakamoto, K.; Matrix-isolation infrared spectra of oxy (tetraphenyl porphyrinato) iron (II) containing CS2 and SO2 as axial ligands, J. Mol. Struct. 1986, 146, 111-121.
[2] Massoudipour, M.; Tewari, K.; Pandey, K.; Synthesis and spectral studies of metalloporphyrins of Cu, Fe, Ru, Ni with carbon, nitrogen and sulfur ligands Polyhedron, 1989, 8, 1447-145.
[3] Nassar, A F.; Williams, W.; Rusling, J F.; Electron Transfer from Electrodes to Myoglobin: Facilitated in Surfactant Films and Blocked by Adsorbed Biomacromolecules, Anal. Chem. 1995, 67, 14, 2386–2392.
[4] Ma, H.; Naifei, H.; Nassar, A F.; Ma. W. C.; Electro active myoglobin films grown layer-by-layer with poly (styrenesulfonate) on pyrolytic graphite electrodes, Langmuir, 2000, 16, 11, 4969–4975.
[5] Rusling, J. F.; Nassar, A. E. F.; Enhanced electron transfer for myoglobin in surfactant films on electrodes, J. Am. Chem. Soc. 1993, 115, 11891-11897.
[6] Zhong. Z.; Rusling, J. F.; Electron transfer between myoglobin and electrodes in thin films of phosphatidylcholines and dihexadecylphosphate Biophysical Chemistry, 1997, 63, 133-146.
[7] Tanaks, K. T.; Tamamushi, R. T.; Electrochemical study of the polycrystalline gold electrode in dimethylsulphoxide J. Electroanal. Chem., 1987, 236, 305-311.
[8] King, B. C.; Hawakridge, F. M.; Hoffman, A. E; Electrochemical studies of cyanometmyoglobin and metmyoglobin: implications for long-range electron transfer in proteins J. Am. Chem. Soc., 1992, 114, 10603-10608.
[9] Nassar, A. E. F.; Bobbitt, J. M.; Stuart, J. D.; Rusling, J. F.; Catalytic Reduction of Organohalide Pollutants by Myoglobin in a Biomembrane-like Surfactant Film. J. Am. Chem. Soc., 1995, 117, 10986-10993.
[10] Lin, R.; Bayachou, M.; Greaves, J.; Farmer, P. J.; Nitrite Reduction by Myoglobin in Surfactant Films, J. Am. Chem. Soc., 1997, 119, 12689-12690.
[11] Chen, S. M.; Tseng, C. C.; The characterization and bioelectrocatalytic properties of hemoglobin by direct electrochemistry of DDAB film modified electrodes, Electrochim. Acta, 2004, 49, 1903-1914.
[12] Kline, M. A.; Barley, M. H.; Meyer, T. I.; Electrocatalytic reduction of bisulfite to hydrogen sulfide based on a water-soluble iron porphyrin, Iorg. Chem., 1987, 26, 2196-2197.
[13] Sheidt, W. R.; Lee, Y. J.; Finnegan, M. G.; Reactions of sulfur dioxide with iron porphyrinates and the crystal structure of (hydrogen sulfato) (tetraphenyl porphinato) iron (III) hemibenzene solvate, Iorg. Chem., 1988, 27, 4725-4730.
[14] Reynolds, M. S.; Holm, R. H.; Binding of oxysulfur anions to macrocyclic iron (II, III): [(Fe(TPP))2SO4] and Fe(Me6-4,11-dieneN4) (S2O5)] Iorg. Chim. Acta, 1989, 155, 113-123.
[15] Daum, M. P.; Lenhard, J. R.; Rolison, D. R.; Murray, R. W.; Diffusional charge transport through ultrathin films of radiofrequency plasma polymerized vinylferrocene at low temperature, J. Am. Chem Soc., 1980, 102, 4649-4652.
[16] Daum, M. P.; Murray, R. W.; Charge-transfer diffusion rates and activity relationships during oxidation and reduction of plasma-polymerized vinylferrocene films, J. Phys. Chem., 1981, 85, 389-396.
[17] Nicholson, R. S.; Theory and Application of Cyclic Voltammetry for Measurement of Electrode Reaction Kinetics. Anal Chem., 1965, 37, 11, 1351–1355.
[18] Jarza̧bek, G.; Borkowska, Z.; Electrochemical study of the polycrystalline gold electrode in dimethylsulphoxide, Electroanal. Chem., 1987, 295-303.
[19] Peerce, P. J.; Bard, A. J.; Poylmer film electrodes-5, Electroanal. Chem., 1980, 108, 121-136.
[20] Peerce, P. J.; Bard, A. J.; Poylmer film electrodes-5, Electroanal. Chem., 1980, 114, 89-103.
[21] Oyama, N. A.; Anson F. C.; Electrochemical responses of multiply-charged transition metal complexes bound electrostatically to graphite electrode surfaces coated with polyelectrolytes, Electrochem. Soc., 1980, 127, 247-263.
[22] Okamoto, Y.; Suzuki, K.; Ohta, K.; Hatada, H.; Yuki, H.;, Optically active poly (triphenylmethyl methacrylate) with one-handed helical conformation J. Am. Chem. Soc., 1979, 101, 547-556.
[23] Schroeder, A. H.; Kaufman, F. B.; Engler, E. M.; Kramer, S. R.; Chambers, J. Q.; The influence of polymer morphology on polymer film electrochemistry, J. Am. Chem. Soc., 1980, 102, 483-496.
[24] Daum, M. P.; Murray, R. W.; Increasing the rate of charging of redox polymer films extended surface electrodes, J. Electroanal. Chem., 1979, 103, 289 -303.
[25] Rudolph, A. M.; Theoretical relations among rate constants, barriers, and Broensted slopes of chemical reactions, J. Phys. Chem., 1978, 82, 403-416.
[26] Bard, A. J.; Faulkner; L. R; In Electrochemical Methods: Fundamentals and Applications, Wiley, New York, 2006.
[27] Radalla, A. M.; Rahman, M. H.; Ryan, M. D.; Catalytic Reduction of Bisulfite by Myoglobin/Surfactant Films, Electroanalysis, 2017, 29, 2437-2443.
[28] . Bard, A. J Faulkner, L. R; Electrochemical Methods, Wiley, New York, 1980.
[29] Laviron, E.; A. C. polarography and faradaic impedance of strongly adsorbed electroactive species: Part I. Theoretical and experimental study of a quasireversible reaction in the case of a Langmuir isotherm J. Electroanal. Chem. 1979, 61. 19-23.
[30] Bard, A. J.; Faulkner, L. R; Electrochemical Methods, Fundamentals and Applications 2 nd ed., Wiley, New York, 2001.
Cite This Article
  • APA Style

    Abdelatty Mohamed Radalla, Michael Dennis Ryan. (2022). Cyclic Voltammetric Studies on Electrocatalytic Reduction of Bisulfite in Aqueous Buffered Solutions Using a Myoglobin / Surfactant Film Electrode. American Journal of Chemical Engineering, 10(6), 116-120. https://doi.org/10.11648/j.ajche.20221006.11

    Copy | Download

    ACS Style

    Abdelatty Mohamed Radalla; Michael Dennis Ryan. Cyclic Voltammetric Studies on Electrocatalytic Reduction of Bisulfite in Aqueous Buffered Solutions Using a Myoglobin / Surfactant Film Electrode. Am. J. Chem. Eng. 2022, 10(6), 116-120. doi: 10.11648/j.ajche.20221006.11

    Copy | Download

    AMA Style

    Abdelatty Mohamed Radalla, Michael Dennis Ryan. Cyclic Voltammetric Studies on Electrocatalytic Reduction of Bisulfite in Aqueous Buffered Solutions Using a Myoglobin / Surfactant Film Electrode. Am J Chem Eng. 2022;10(6):116-120. doi: 10.11648/j.ajche.20221006.11

    Copy | Download

  • @article{10.11648/j.ajche.20221006.11,
      author = {Abdelatty Mohamed Radalla and Michael Dennis Ryan},
      title = {Cyclic Voltammetric Studies on Electrocatalytic Reduction of Bisulfite in Aqueous Buffered Solutions Using a Myoglobin / Surfactant Film Electrode},
      journal = {American Journal of Chemical Engineering},
      volume = {10},
      number = {6},
      pages = {116-120},
      doi = {10.11648/j.ajche.20221006.11},
      url = {https://doi.org/10.11648/j.ajche.20221006.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajche.20221006.11},
      abstract = {Background: The surfactant, didodecyl dimethyl ammonium bromide (DDAB), was used to immobilize myoglobin (Mb) onto glassy carbon (GC) electrode surfaces. The Mb/DDAB film on GC electrode showed good charge transport rates. Objectives: Mb in DDAB was utilised as a redox catalyst for reduction reactions requiring multi-electron transfers. Cyclic voltammetry has proved the Mb modified film electrode to be an effective electrocatalyst for the multi-electron reduction of bisulfite in aqueous buffered solutions. Methods: Using cyclic voltammetry technique, bisulfite reduction was studied at various concentrations and scan rates in different aqueous buffer solutions of various pH. Results: The values of ks of the film and kcat of the catalytic reaction of bisulfite were obtained at different pH values. The variation in the catalytic rate constant values with pH confirmed that the bisulfite is the reactive species. Conclusions: The catalytic bisulfite reduction was an irreversible, diffusion-controlled, and pH dependent process. The reduction of bisulfite by the Mb/DDAB film followed the EC’ catalytic mechanism.},
     year = {2022}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Cyclic Voltammetric Studies on Electrocatalytic Reduction of Bisulfite in Aqueous Buffered Solutions Using a Myoglobin / Surfactant Film Electrode
    AU  - Abdelatty Mohamed Radalla
    AU  - Michael Dennis Ryan
    Y1  - 2022/12/08
    PY  - 2022
    N1  - https://doi.org/10.11648/j.ajche.20221006.11
    DO  - 10.11648/j.ajche.20221006.11
    T2  - American Journal of Chemical Engineering
    JF  - American Journal of Chemical Engineering
    JO  - American Journal of Chemical Engineering
    SP  - 116
    EP  - 120
    PB  - Science Publishing Group
    SN  - 2330-8613
    UR  - https://doi.org/10.11648/j.ajche.20221006.11
    AB  - Background: The surfactant, didodecyl dimethyl ammonium bromide (DDAB), was used to immobilize myoglobin (Mb) onto glassy carbon (GC) electrode surfaces. The Mb/DDAB film on GC electrode showed good charge transport rates. Objectives: Mb in DDAB was utilised as a redox catalyst for reduction reactions requiring multi-electron transfers. Cyclic voltammetry has proved the Mb modified film electrode to be an effective electrocatalyst for the multi-electron reduction of bisulfite in aqueous buffered solutions. Methods: Using cyclic voltammetry technique, bisulfite reduction was studied at various concentrations and scan rates in different aqueous buffer solutions of various pH. Results: The values of ks of the film and kcat of the catalytic reaction of bisulfite were obtained at different pH values. The variation in the catalytic rate constant values with pH confirmed that the bisulfite is the reactive species. Conclusions: The catalytic bisulfite reduction was an irreversible, diffusion-controlled, and pH dependent process. The reduction of bisulfite by the Mb/DDAB film followed the EC’ catalytic mechanism.
    VL  - 10
    IS  - 6
    ER  - 

    Copy | Download

Author Information
  • Department of Chemistry, Faculty of Science, Beni-Suef University, Beni-Suef, Egypt

  • Chemistry Department, Marquette University, Milwaukee, USA

  • Sections