Metallic Trellis Project, Using the Cype 3d Program

Consul Josiel Teixeira

doi:doi:10.11648/j.ajmie.20230802.12

| Peer-Reviewed

Metallic Trellis Project, Using the Cype 3d Program

Consul Josiel Teixeira

Published in American Journal of Mechanical and Industrial Engineering (Volume 8, Issue 2)

Received: 16 May 2023 Accepted: 5 June 2023 Published: 20 June 2023

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In this article, a project is carried out for a metallic truss, a type of structure used to cover buildings and buildings, whether industrial or commercial. For this research, a computer program known as Cype 3d® was used, a program that contains a wide library of profiles with the main Brazilian and world manufacturers, registered, in addition to allowing the editing and registration of new profiles within existing series. Aware of the need to optimize resources, the design of metallic trusses using computer programs brings productivity and accuracy that are highly important in the construction of building roofs and any and all constructions. Based on previous knowledge about metallic structures, types of materials and their applications, models and types of trusses, it was decided to design a “Pratt” truss. and a metallic structure, known as a truss, of the Pratt type is needed. For this, the Cype 3d program was used. Applying pre-defined loads, efforts required for the project, such as loads and applied loads, and the requested material, using the program, accurately and with the correct strategy. So that after entering the data, you can reach the quick result in a short time, Allocation of resources necessary for the construction of these structures in an optimized way, as well as the generation of documentation for their manufacture.

Published in	American Journal of Mechanical and Industrial Engineering (Volume 8, Issue 2)
DOI	10.11648/j.ajmie.20230802.12
Page(s)	45-54
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Metallic Lattice, Cype 3d, Metallic Structure

References

[1]	BRAZILIAN ASSOCIATION OF TECHNICAL STANDARDS. NBR 8800: 2008, Project of steel structures and composite structures of steel and concrete for buildings, 2008.
[2]	BRITO and SILVA, M. C. Construction of multistory steel buildings. Department of Arts and Architecture, Goiânia: PUC, 2016, 6 p. Available at: http://wwwo.metalica.com.br/construcao-de-edificacoes-multiandares-em-aco. Access in May. 2017..
[3]	DALDEGAN, E. Metal Structure: Main advantages in civil construction, 2017. Available at: Accessed on: 20 Apr. 2018.
[4]	DIAS, Luis Andrade de Mattos. STEEL STRUCTURES concepts, techniques and language: 3rd ed. São Paulo: Ziggurat, 1998.
[5]	DI PIETRO, João Eduardo, The Qualitative Knowledge of Building Structures in Architect Training. Florianópolis, UFSC, 2000. (Doctoral Thesis in Engineering), Florianópolis Brazil.
[6]	FERRAZ, H. Steel in Civil Construction. Electronic Magazine of Sciences, Architecture and Urbanism, São Carlos: University of São Paulo, 2003, Brazil.
[7]	GALVAMINAS. Metal lattice. In: Galvaminas, 2020. Available at: . Accessed on: September 07, 2020. GISSA. What is a truss?GESUALDO, F. A. R. Wooden structures – Lecture notes. Federal University of Uberlândia, 2003, Brazil.
[8]	GESUALDO, F.A.R. Wooden structures – Lecture notes. Federal University of Uberlândia, 2003, Brazil.
[9]	NASCIMNETO, L.A.; SANTOS, E. T. The construction industry in the information age. ANTAC Magazine / Built Environment, Porto Alegre, v. 3, p. 69-81, 2003.
[10]	Rigo, E. Optimization methods applied to the analysis of structures. Dissertation (Master in Structural Engineering) - School of Engineering of São Carlos/USP, University of Sao Paulo, Sao Carlos. Brazil (1999).
[11]	ROMEIRO Filho, E., 1997, CAD in Industry: Implementation and Management. Rio de Janeiro: Editora da UFRJ, Brazil.
[12]	SALES, U.C.; SOUZA, H. A.; NEVES, F. A. Mapping problems in industrialized steel construction. Ouro Preto, Rem: Revista Escola de Minas, v. 54, no. 4, p. 303-309, 2001.
[13]	SOUSA, JOSÉ AUGUSTO FORNARI. Development of software to support the study of trusses in bridges and roofs. Dissertation submitted to the Federal University of Santa Catarina as a final requirement for obtaining a Master's degree in Computer Science. Florianopolis, Brazil, October 2002.
[14]	SOUZA, M.; RODRIGUES, R. Structural systems of buildings and examples. 93 p. Lecture notes — Faculty of Civil Engineering, Architecture and Urbanism - Department of Structures UNICAMP, Campinas, 2008.
[15]	SOUZA, A. Design analysis of spatial metallic structures: emphasis on roofs. 159 p. Master's Dissertation in Structural Engineering — School of Engineering of São Carlos - USP, São Carlos, 2002.
[16]	SOUZA, A. Theoretical and experimental analysis of space trusses. 350 p. Doctoral Thesis in Structural Engineering — School of Engineering of São Carlos - USP, São Carlos, 2003.

Cite This Article

Plain Text BibTeX RIS

APA Style

Consul Josiel Teixeira. (2023). Metallic Trellis Project, Using the Cype 3d Program. American Journal of Mechanical and Industrial Engineering, 8(2), 45-54. https://doi.org/10.11648/j.ajmie.20230802.12

Copy | Download

ACS Style

Consul Josiel Teixeira. Metallic Trellis Project, Using the Cype 3d Program. Am. J. Mech. Ind. Eng. 2023, 8(2), 45-54. doi: 10.11648/j.ajmie.20230802.12

Copy | Download

AMA Style

Consul Josiel Teixeira. Metallic Trellis Project, Using the Cype 3d Program. Am J Mech Ind Eng. 2023;8(2):45-54. doi: 10.11648/j.ajmie.20230802.12

Copy | Download

@article{10.11648/j.ajmie.20230802.12,
  author = {Consul Josiel Teixeira},
  title = {Metallic Trellis Project, Using the Cype 3d Program},
  journal = {American Journal of Mechanical and Industrial Engineering},
  volume = {8},
  number = {2},
  pages = {45-54},
  doi = {10.11648/j.ajmie.20230802.12},
  url = {https://doi.org/10.11648/j.ajmie.20230802.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmie.20230802.12},
  abstract = {In this article, a project is carried out for a metallic truss, a type of structure used to cover buildings and buildings, whether industrial or commercial. For this research, a computer program known as Cype 3d® was used, a program that contains a wide library of profiles with the main Brazilian and world manufacturers, registered, in addition to allowing the editing and registration of new profiles within existing series. Aware of the need to optimize resources, the design of metallic trusses using computer programs brings productivity and accuracy that are highly important in the construction of building roofs and any and all constructions. Based on previous knowledge about metallic structures, types of materials and their applications, models and types of trusses, it was decided to design a “Pratt” truss. and a metallic structure, known as a truss, of the Pratt type is needed. For this, the Cype 3d program was used. Applying pre-defined loads, efforts required for the project, such as loads and applied loads, and the requested material, using the program, accurately and with the correct strategy. So that after entering the data, you can reach the quick result in a short time, Allocation of resources necessary for the construction of these structures in an optimized way, as well as the generation of documentation for their manufacture.},
 year = {2023}
}

Copy | Download

TY  - JOUR
T1  - Metallic Trellis Project, Using the Cype 3d Program
AU  - Consul Josiel Teixeira
Y1  - 2023/06/20
PY  - 2023
N1  - https://doi.org/10.11648/j.ajmie.20230802.12
DO  - 10.11648/j.ajmie.20230802.12
T2  - American Journal of Mechanical and Industrial Engineering
JF  - American Journal of Mechanical and Industrial Engineering
JO  - American Journal of Mechanical and Industrial Engineering
SP  - 45
EP  - 54
PB  - Science Publishing Group
SN  - 2575-6060
UR  - https://doi.org/10.11648/j.ajmie.20230802.12
AB  - In this article, a project is carried out for a metallic truss, a type of structure used to cover buildings and buildings, whether industrial or commercial. For this research, a computer program known as Cype 3d® was used, a program that contains a wide library of profiles with the main Brazilian and world manufacturers, registered, in addition to allowing the editing and registration of new profiles within existing series. Aware of the need to optimize resources, the design of metallic trusses using computer programs brings productivity and accuracy that are highly important in the construction of building roofs and any and all constructions. Based on previous knowledge about metallic structures, types of materials and their applications, models and types of trusses, it was decided to design a “Pratt” truss. and a metallic structure, known as a truss, of the Pratt type is needed. For this, the Cype 3d program was used. Applying pre-defined loads, efforts required for the project, such as loads and applied loads, and the requested material, using the program, accurately and with the correct strategy. So that after entering the data, you can reach the quick result in a short time, Allocation of resources necessary for the construction of these structures in an optimized way, as well as the generation of documentation for their manufacture.
VL  - 8
IS  - 2
ER  -

Copy | Download

Author Information

Consul Josiel Teixeira

Department of Production Engineering, Methodist University Center-IPA, Porto Alegre, Brazil

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Consul Josiel Teixeira. (2023). Metallic Trellis Project, Using the Cype 3d Program. American Journal of Mechanical and Industrial Engineering, 8(2), 45-54. https://doi.org/10.11648/j.ajmie.20230802.12

Copy | Download

ACS Style

Consul Josiel Teixeira. Metallic Trellis Project, Using the Cype 3d Program. Am. J. Mech. Ind. Eng. 2023, 8(2), 45-54. doi: 10.11648/j.ajmie.20230802.12

Copy | Download

AMA Style

Consul Josiel Teixeira. Metallic Trellis Project, Using the Cype 3d Program. Am J Mech Ind Eng. 2023;8(2):45-54. doi: 10.11648/j.ajmie.20230802.12

Copy | Download

@article{10.11648/j.ajmie.20230802.12,
  author = {Consul Josiel Teixeira},
  title = {Metallic Trellis Project, Using the Cype 3d Program},
  journal = {American Journal of Mechanical and Industrial Engineering},
  volume = {8},
  number = {2},
  pages = {45-54},
  doi = {10.11648/j.ajmie.20230802.12},
  url = {https://doi.org/10.11648/j.ajmie.20230802.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmie.20230802.12},
  abstract = {In this article, a project is carried out for a metallic truss, a type of structure used to cover buildings and buildings, whether industrial or commercial. For this research, a computer program known as Cype 3d® was used, a program that contains a wide library of profiles with the main Brazilian and world manufacturers, registered, in addition to allowing the editing and registration of new profiles within existing series. Aware of the need to optimize resources, the design of metallic trusses using computer programs brings productivity and accuracy that are highly important in the construction of building roofs and any and all constructions. Based on previous knowledge about metallic structures, types of materials and their applications, models and types of trusses, it was decided to design a “Pratt” truss. and a metallic structure, known as a truss, of the Pratt type is needed. For this, the Cype 3d program was used. Applying pre-defined loads, efforts required for the project, such as loads and applied loads, and the requested material, using the program, accurately and with the correct strategy. So that after entering the data, you can reach the quick result in a short time, Allocation of resources necessary for the construction of these structures in an optimized way, as well as the generation of documentation for their manufacture.},
 year = {2023}
}

Copy | Download

TY  - JOUR
T1  - Metallic Trellis Project, Using the Cype 3d Program
AU  - Consul Josiel Teixeira
Y1  - 2023/06/20
PY  - 2023
N1  - https://doi.org/10.11648/j.ajmie.20230802.12
DO  - 10.11648/j.ajmie.20230802.12
T2  - American Journal of Mechanical and Industrial Engineering
JF  - American Journal of Mechanical and Industrial Engineering
JO  - American Journal of Mechanical and Industrial Engineering
SP  - 45
EP  - 54
PB  - Science Publishing Group
SN  - 2575-6060
UR  - https://doi.org/10.11648/j.ajmie.20230802.12
AB  - In this article, a project is carried out for a metallic truss, a type of structure used to cover buildings and buildings, whether industrial or commercial. For this research, a computer program known as Cype 3d® was used, a program that contains a wide library of profiles with the main Brazilian and world manufacturers, registered, in addition to allowing the editing and registration of new profiles within existing series. Aware of the need to optimize resources, the design of metallic trusses using computer programs brings productivity and accuracy that are highly important in the construction of building roofs and any and all constructions. Based on previous knowledge about metallic structures, types of materials and their applications, models and types of trusses, it was decided to design a “Pratt” truss. and a metallic structure, known as a truss, of the Pratt type is needed. For this, the Cype 3d program was used. Applying pre-defined loads, efforts required for the project, such as loads and applied loads, and the requested material, using the program, accurately and with the correct strategy. So that after entering the data, you can reach the quick result in a short time, Allocation of resources necessary for the construction of these structures in an optimized way, as well as the generation of documentation for their manufacture.
VL  - 8
IS  - 2
ER  -

Copy | Download