Design and Experiments Research on 9GYQ Family of Forage Crusher Flattening System Equipped with Tooth-cutter

Chunhua Zhao; Ke Ping Zhang; Yuan Xi Deng; Aimin Gao

doi:doi:

| Peer-Reviewed

Design and Experiments Research on 9GYQ Family of Forage Crusher Flattening System Equipped with Tooth-cutter

Chunhua Zhao, Ke Ping Zhang, Yuan Xi Deng, Aimin Gao

Published in Asia-Pacific Journal of Mechanical Engineering (Volume 2, Issue 1)

Received: 15 October 2020 Accepted: 26 October 2020 Published: 4 November 2020

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Aiming at the problem of domestic forage Crusher lower adaptability, high power and unstability effect of rollers flattening in harvesting Alfalfa, and in order to improve practicability of forage Crusher based on the difference biomechanical characteristics between harvesting terraced dryland Alfalfa and irrigated Alfalfa, the effictive power of forage Crusher flattening system equiped with Tooth-cutter was designed and application, V shape flattening device in 9GYQ family of forage Crusher were developed by using Solidworks software. Setting steel rollers with 5mm deepth flattening device parameters and rubber rollers with 15mm depth were selected to orthogonal testtests and statistical analysis, respectively. Field tests results of 9GYQ family of forage Crusher show that: For terraced dryland Alfalfa Long dong, Rubber rollers were selected with initial pressure of 2200N/m, flattening gaps is adapt to 4 mm, inclination angle of 20°, respectively, and the average ratio of crushing is up to 90.77%% and the loss rates of forage is up to 3.51%% in field tests; For irrigated Alfalfa, rubber rollers were selected with initial pressure of 1650N/m, flattening gap 3 mm, inclination angle of 30°,respectively, and the average ratio of flattening is up to 91.889%% and the loss rate of broken forage is up to 3.479%% in field tests.

Published in	Asia-Pacific Journal of Mechanical Engineering (Volume 2, Issue 1)
Page(s)	1-9
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Flatting System, Forage Crusher Equipped with Tooth-cutter, Power of Crushing, V Type of Flattening Rollers, The Ratio of Flattening, Experment Design and Analysis

References

[1]	Kung L，Stough E C，McDonell E E，etc．The effect of wide swathing on wilting times and nutritive value of Alfalfa Journal of Dairy Science，2010，93（4）：1770-1773．
[2]	杨明韵．切割压扁机的发展及特点[J].内蒙古农牧学院学报，1982（1）：139-157．
[3]	单贵莲,薛世明,郭盼,等.刈割时期和调制方法对紫花苜蓿干草质量的影响[J].中国草地学报,2012,(5):28～33.
[4]	Wangchenje, Zhou he, etc. Path analysis of the population characters to crude protein during Alfalfa [J],ACTA PRATACULTURAE SINICA, 2005,14(3),78～81．
[5]	Zhao Chunhua, Han Zhengsheng, Shi Shangli, ec al. Mechanical properties and microstructure of new species forage stems in harvesting periods[J]. Transactions of the CSAE, 2011, 27(7): 179－183.
[6]	Phani K. Adapa，Greg J. Schoenau，Edwin A. Arinze．Fractionation of Alfalfa into Leaves and Stems using a Three Pass Rotary Drum Dryer [J].Biosystems Engineering，2005，91（4）：455～463．
[7]	赵春花等，甘肃农业大学.一种前悬挂齿刀链椭圆盘割草调制机：中国，ZL201510577332.0[P]．授权日2019-07-26.
[8]	高东明,王德成,郝丽颖,等．割草压扁机的调制机构设计与试验 [J]．江苏大学学报，2013，34（3）：287-292．
[9]	Fu Zuo li, etc. Study on cutting system for Two Discs Mower Conditioner [D], Doctoral dissertation of Chinese Agriculature University,2014.6.
[10]	赵春花等，甘肃农业大学.一种割草压扁机压扁间隙调节装置：中国，ZL201410012231.4 [P]．授权日2016-09-27．
[11]	赵春花等，甘肃农业大学.一种坡地仿形割草压扁机传动系统：中国，ZL201320197941.X [P]．2013-10-09．
[12]	卞鲁平，赵春花*，马世伦.割草压扁机人字形橡胶压扁辊的加工方法[J].甘肃农业大学学报,2014，49（5）：176-180．
[13]	Ahmad Khalilian，David Batchelder，Galen McLaughlin．Forage drying using hard crushing and binders [J]．Transactions of the ASAE，1985，28（5）：1225-1228．
[14]	Kondratyev, V.N; Bobko, VA. The influence of the kinematic parameters of the cutting device mower on performance of cutting and grinding herds MelnopatsnR: haychhbln xyphal：2011. （2):47~56。
[15]	Savoie P，Asselin N，Lajoie J，Tremblay D．Evaluation of intensive forage conditioning with a modified disk mower [J]．Applied Engineering in Agriculture，1997，13（6）：709～714．
[16]	Koegel R G，Fomin V I，Bruhn H D．Roller maceration and fractionation of forages [J]．Transactions of the ASAE，1973， 16（9）：236～240．
[17]	赵建柱，郭海林，王枫辰，等.苜蓿草压扁试验台设计与试验[J],农业机械学报,2014，45（11），119～124.
[18]	CZ.卡那沃依斯基（波兰）．收获机械 [M]．北京：中国农业机械出版社，1983：302～307．
[19]	JB/T 9700-1999牧草收获机械试验方法通则 [S]．
[20]	20. GB/T 21899-2008 割草压扁机[S]．
[21]	赵春花,张锋伟,韩正晟.匍匐缠结牧草收割期茎秆生物力学特性试验[J].农业机械学报, 2010,41(6)：65～69,92
[22]	Zhao Chunhua, Hanzhengsheng, Wangfenge. Experiment on Biomechanical Properties of Bottom Stems of Forage in harvesting period [J]. Transactions o f the Chinese Society for Agricultural Machinery, 2010, 41 (4): 85~ 89,100．
[23]	Zhao Chunhua，Wu Jianming，Cheng Zi yong，etc. Research on Mechanical Properties and Chemical Compositions of Bottom Stems of Alfalfa in Harvesting Period［C］/ / International Conference on Science and Technology,2011,1350～1355．
[24]	赵春花等.牧草生物力学与草业机械耦合通用数据库系统V3.0[P]. 中国国家版权局软件著作登记：2015SR190150，2015.9．

Cite This Article

Plain Text BibTeX RIS

APA Style

Chunhua Zhao, Ke Ping Zhang, Yuan Xi Deng, Aimin Gao. (2020). Design and Experiments Research on 9GYQ Family of Forage Crusher Flattening System Equipped with Tooth-cutter. Asia-Pacific Journal of Mechanical Engineering, 2(1), 1-9.

Copy | Download

ACS Style

Chunhua Zhao; Ke Ping Zhang; Yuan Xi Deng; Aimin Gao. Design and Experiments Research on 9GYQ Family of Forage Crusher Flattening System Equipped with Tooth-cutter. Asia-Pac. J. Mech. Eng. 2020, 2(1), 1-9.

Copy | Download

AMA Style

Chunhua Zhao, Ke Ping Zhang, Yuan Xi Deng, Aimin Gao. Design and Experiments Research on 9GYQ Family of Forage Crusher Flattening System Equipped with Tooth-cutter. Asia-Pac J Mech Eng. 2020;2(1):1-9.

Copy | Download

@article{10051552,
  author = {Chunhua Zhao and Ke Ping Zhang and Yuan Xi Deng and Aimin Gao},
  title = {Design and Experiments Research on 9GYQ Family of Forage Crusher Flattening System Equipped with Tooth-cutter},
  journal = {Asia-Pacific Journal of Mechanical Engineering},
  volume = {2},
  number = {1},
  pages = {1-9},
  url = {https://www.sciencepublishinggroup.com/article/10051552},
  abstract = {Aiming at the problem of domestic forage Crusher lower adaptability, high power and unstability effect of rollers flattening in harvesting Alfalfa, and in order to improve practicability of forage Crusher based on the difference biomechanical characteristics between harvesting terraced dryland Alfalfa and irrigated Alfalfa, the effictive power of forage Crusher flattening system equiped with Tooth-cutter was designed and application, V shape flattening device in 9GYQ family of forage Crusher were developed by using Solidworks software. Setting steel rollers with 5mm deepth flattening device parameters and rubber rollers with 15mm depth were selected to orthogonal testtests and statistical analysis, respectively. Field tests results of 9GYQ family of forage Crusher show that: For terraced dryland Alfalfa Long dong, Rubber rollers were selected with initial pressure of 2200N/m, flattening gaps is adapt to 4 mm, inclination angle of 20°, respectively, and the average ratio of crushing is up to 90.77%% and the loss rates of forage is up to 3.51%% in field tests; For irrigated Alfalfa, rubber rollers were selected with initial pressure of 1650N/m, flattening gap 3 mm, inclination angle of 30°,respectively, and the average ratio of flattening is up to 91.889%% and the loss rate of broken forage is up to 3.479%% in field tests.},
 year = {2020}
}

Copy | Download

TY  - JOUR
T1  - Design and Experiments Research on 9GYQ Family of Forage Crusher Flattening System Equipped with Tooth-cutter
AU  - Chunhua Zhao
AU  - Ke Ping Zhang
AU  - Yuan Xi Deng
AU  - Aimin Gao
Y1  - 2020/11/04
PY  - 2020
T2  - Asia-Pacific Journal of Mechanical Engineering
JF  - Asia-Pacific Journal of Mechanical Engineering
JO  - Asia-Pacific Journal of Mechanical Engineering
SP  - 1
EP  - 9
PB  - Science Publishing Group
UR  - http://www.sciencepg.com/article/10051552
AB  - Aiming at the problem of domestic forage Crusher lower adaptability, high power and unstability effect of rollers flattening in harvesting Alfalfa, and in order to improve practicability of forage Crusher based on the difference biomechanical characteristics between harvesting terraced dryland Alfalfa and irrigated Alfalfa, the effictive power of forage Crusher flattening system equiped with Tooth-cutter was designed and application, V shape flattening device in 9GYQ family of forage Crusher were developed by using Solidworks software. Setting steel rollers with 5mm deepth flattening device parameters and rubber rollers with 15mm depth were selected to orthogonal testtests and statistical analysis, respectively. Field tests results of 9GYQ family of forage Crusher show that: For terraced dryland Alfalfa Long dong, Rubber rollers were selected with initial pressure of 2200N/m, flattening gaps is adapt to 4 mm, inclination angle of 20°, respectively, and the average ratio of crushing is up to 90.77%% and the loss rates of forage is up to 3.51%% in field tests; For irrigated Alfalfa, rubber rollers were selected with initial pressure of 1650N/m, flattening gap 3 mm, inclination angle of 30°,respectively, and the average ratio of flattening is up to 91.889%% and the loss rate of broken forage is up to 3.479%% in field tests.
VL  - 2
IS  - 1
ER  -

Copy | Download

Author Information

Chunhua Zhao

Mechanical and Electronic Engineering College, Gansu Agricultural University, Lanzhou, China
Ke Ping Zhang

Mechanical and Electronic Engineering College, Gansu Agricultural University, Lanzhou, China
Yuan Xi Deng

Gansu Agricultural University, Lanzhou, China
Aimin Gao

Mechanical and Electronic Engineering College, Gansu Agricultural University, Lanzhou, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Chunhua Zhao, Ke Ping Zhang, Yuan Xi Deng, Aimin Gao. (2020). Design and Experiments Research on 9GYQ Family of Forage Crusher Flattening System Equipped with Tooth-cutter. Asia-Pacific Journal of Mechanical Engineering, 2(1), 1-9.

Copy | Download

ACS Style

Chunhua Zhao; Ke Ping Zhang; Yuan Xi Deng; Aimin Gao. Design and Experiments Research on 9GYQ Family of Forage Crusher Flattening System Equipped with Tooth-cutter. Asia-Pac. J. Mech. Eng. 2020, 2(1), 1-9.

Copy | Download

AMA Style

Chunhua Zhao, Ke Ping Zhang, Yuan Xi Deng, Aimin Gao. Design and Experiments Research on 9GYQ Family of Forage Crusher Flattening System Equipped with Tooth-cutter. Asia-Pac J Mech Eng. 2020;2(1):1-9.

Copy | Download

@article{10051552,
  author = {Chunhua Zhao and Ke Ping Zhang and Yuan Xi Deng and Aimin Gao},
  title = {Design and Experiments Research on 9GYQ Family of Forage Crusher Flattening System Equipped with Tooth-cutter},
  journal = {Asia-Pacific Journal of Mechanical Engineering},
  volume = {2},
  number = {1},
  pages = {1-9},
  url = {https://www.sciencepublishinggroup.com/article/10051552},
  abstract = {Aiming at the problem of domestic forage Crusher lower adaptability, high power and unstability effect of rollers flattening in harvesting Alfalfa, and in order to improve practicability of forage Crusher based on the difference biomechanical characteristics between harvesting terraced dryland Alfalfa and irrigated Alfalfa, the effictive power of forage Crusher flattening system equiped with Tooth-cutter was designed and application, V shape flattening device in 9GYQ family of forage Crusher were developed by using Solidworks software. Setting steel rollers with 5mm deepth flattening device parameters and rubber rollers with 15mm depth were selected to orthogonal testtests and statistical analysis, respectively. Field tests results of 9GYQ family of forage Crusher show that: For terraced dryland Alfalfa Long dong, Rubber rollers were selected with initial pressure of 2200N/m, flattening gaps is adapt to 4 mm, inclination angle of 20°, respectively, and the average ratio of crushing is up to 90.77%% and the loss rates of forage is up to 3.51%% in field tests; For irrigated Alfalfa, rubber rollers were selected with initial pressure of 1650N/m, flattening gap 3 mm, inclination angle of 30°,respectively, and the average ratio of flattening is up to 91.889%% and the loss rate of broken forage is up to 3.479%% in field tests.},
 year = {2020}
}

Copy | Download

TY  - JOUR
T1  - Design and Experiments Research on 9GYQ Family of Forage Crusher Flattening System Equipped with Tooth-cutter
AU  - Chunhua Zhao
AU  - Ke Ping Zhang
AU  - Yuan Xi Deng
AU  - Aimin Gao
Y1  - 2020/11/04
PY  - 2020
T2  - Asia-Pacific Journal of Mechanical Engineering
JF  - Asia-Pacific Journal of Mechanical Engineering
JO  - Asia-Pacific Journal of Mechanical Engineering
SP  - 1
EP  - 9
PB  - Science Publishing Group
UR  - http://www.sciencepg.com/article/10051552
AB  - Aiming at the problem of domestic forage Crusher lower adaptability, high power and unstability effect of rollers flattening in harvesting Alfalfa, and in order to improve practicability of forage Crusher based on the difference biomechanical characteristics between harvesting terraced dryland Alfalfa and irrigated Alfalfa, the effictive power of forage Crusher flattening system equiped with Tooth-cutter was designed and application, V shape flattening device in 9GYQ family of forage Crusher were developed by using Solidworks software. Setting steel rollers with 5mm deepth flattening device parameters and rubber rollers with 15mm depth were selected to orthogonal testtests and statistical analysis, respectively. Field tests results of 9GYQ family of forage Crusher show that: For terraced dryland Alfalfa Long dong, Rubber rollers were selected with initial pressure of 2200N/m, flattening gaps is adapt to 4 mm, inclination angle of 20°, respectively, and the average ratio of crushing is up to 90.77%% and the loss rates of forage is up to 3.51%% in field tests; For irrigated Alfalfa, rubber rollers were selected with initial pressure of 1650N/m, flattening gap 3 mm, inclination angle of 30°,respectively, and the average ratio of flattening is up to 91.889%% and the loss rate of broken forage is up to 3.479%% in field tests.
VL  - 2
IS  - 1
ER  -

Copy | Download