Evaluation of Addition ABS and EPDM Effect on the Mechanical Properties of Ternary Polymer Blends

Sihama Issa Salih; Jawad Kadhum Oleiwi; Rawaa Adnan Abdle Ameer

doi:doi:10.11648/j.ijmsa.20150401.18

| Peer-Reviewed

Evaluation of Addition ABS and EPDM Effect on the Mechanical Properties of Ternary Polymer Blends

Sihama Issa Salih, Jawad Kadhum Oleiwi, Rawaa Adnan Abdle Ameer

Published in International Journal of Materials Science and Applications (Volume 4, Issue 1)

Received: 30 December 2014 Accepted: 14 January 2015 Published: 28 January 2015

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Polymer blends are capable of providing materials with extended useful properties beyond the range that can be obtained from single polymer. Blends of polystyrene (PS) and polypropylene (PP) with adding acrylonitrile-butadiene-styrene (ABS) or ethylene propylene diene monomer (EPDM) are prepared in different ratios by melt blending technique which was carried out using a double screw extruder. The tensile, flexural, impact and hardness tests of all the prepared samples were study. The results from this work show that the elongation property and impact properties for blend system increase with increase PP content in polymer blend of (PS:PP), also increase value of these properties with increase the ratio of adding (ABS or EPDM) for polymer blend (PS:5%PP).The highest values of impact strength was (10.68Kj/m2) for ternary polymers blend (90%PS:5%PP:5%EPDM) and the high values of fracture toughness (6.125MPa√m ) for ternaty polymer blend (90%PS:5%PP:5%ABS).

Published in	International Journal of Materials Science and Applications (Volume 4, Issue 1)
DOI	10.11648/j.ijmsa.20150401.18
Page(s)	39-46
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Mechanical Properties, Ternary Polymer Blends, PS:PP, ABS and EPDM Effect

References

[1]	V. Mittal, "Functional polymer blends: synthesis, properties, and performance ", international standerd book number: 978-1-4398-5669-7, (2012).
[2]	S. C. Siong, "Eeffects of polystyrene–modified natural rubber on the properties of polypropylene / polystyrene blends", University Sains Malaysia, Thesis of Master of Science, (2008).
[3]	A. A. Adewole, A. Denicola, C. G. Gogos and L. Mascia ," Compatibilization of polypropylene–polystyrene blends: Part 2, crystallization behavior and mechanical properties", Inc. Adv. Polym. Techn., Vol. (19): pp. 180–193, (2000).
[4]	C.Jiang You and D.MinJia, "Effect of Styrene-Ethylene/PropleneDiblock Copolymer (SEP) on the Compatiblization of PP/PS Blends", Chinese Journal of Polymer Science, Vol. (21), No.4, pp. 443-446, (2003).
[5]	W. Viratyaporn, R. L. Lehman, and J. Joshi," Impact resistance of selected immiscible polymer blends ", Society of Plastics Engineers [SPE] Annual Technical Conference Proceedings Cincinnati, (2007).
[6]	W. Brostow, T. H. Grguric, O. O. Mejia, D. Pietkiewicz and V. Rek," Polypropylene + Polystyrene Blends with a Compatibilizer ", ISSN 1618-7229, e-Polymers, no. 03, (2008).
[7]	B.A. Ibrahim & K.M. Kadum, " Influence of Polymer Blending on Mechanical and Thermal Properties", University of Technology, Vol. (4), No. 9, (2010).
[8]	"Standard Test Method for Tensile Properties of Plastics D638M- 87b", Annual Book of ASTM Standard, Vol. 09.01, (1988).
[9]	"Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics D 790- 86", Annual Book of ASTM Standard, Vol. 10.01 (1986).
[10]	A. S. Brent, "Plastics Materials and processing ", 2nded., Prentice Hall, (2000).
[11]	Standard Test Method for Un-notched Cantilever Beam Impact Resistance of Plastics ASTM D 4812", Gmtc India MATerials Test Lab, (2014).
[12]	N. N. B. Mohammad and A. Arsad, "Mechanical, Thermal and Morphological Study of Kenaf Fiber Reinforced rPET/ABS Composites", Malaysian Polymer Journal, Vol. 8, No. 1, pp. 8-13, (2013).
[13]	"Standard Test Method for Plastics Properties- Durometer Hardness D 2240", Annual Book of ASTM Standard, Vol. 09.01, (1988).
[14]	R.O. Ebewele," Polymer Science and Technology", Boca Raton, New York,CRC Press, (2000).
[15]	Sihama E. Salih, .Akram R. Jabur and Teeb A. Mohammed “The Effect of PVP Addition on the Mechanical Properties of [84%LLDPE: 15 %(( 100-X) %PP: X%PVP): 1%Basalt Particle] Polymer Blend Composites” Eng. & Tech. Journal, Vol.32, Part (A), No.3, PP 573-583 (2014).
[16]	Sihama E. Salih, .Akram R. Jabur and Teeb A. Mohammed “Comparative Study of the Mechanical Properties of Two Groups Ternary Polymer Blends Composites” Eng. & Tech. Journal, Vol.32, Part (A), No.7, PP 1870-1886 (2014).

Cite This Article

Plain Text BibTeX RIS

APA Style

Sihama Issa Salih, Jawad Kadhum Oleiwi, Rawaa Adnan Abdle Ameer. (2015). Evaluation of Addition ABS and EPDM Effect on the Mechanical Properties of Ternary Polymer Blends. International Journal of Materials Science and Applications, 4(1), 39-46. https://doi.org/10.11648/j.ijmsa.20150401.18

Copy | Download

ACS Style

Sihama Issa Salih; Jawad Kadhum Oleiwi; Rawaa Adnan Abdle Ameer. Evaluation of Addition ABS and EPDM Effect on the Mechanical Properties of Ternary Polymer Blends. Int. J. Mater. Sci. Appl. 2015, 4(1), 39-46. doi: 10.11648/j.ijmsa.20150401.18

Copy | Download

AMA Style

Sihama Issa Salih, Jawad Kadhum Oleiwi, Rawaa Adnan Abdle Ameer. Evaluation of Addition ABS and EPDM Effect on the Mechanical Properties of Ternary Polymer Blends. Int J Mater Sci Appl. 2015;4(1):39-46. doi: 10.11648/j.ijmsa.20150401.18

Copy | Download

@article{10.11648/j.ijmsa.20150401.18,
  author = {Sihama Issa Salih and Jawad Kadhum Oleiwi and Rawaa Adnan Abdle Ameer},
  title = {Evaluation of Addition ABS and EPDM Effect on the Mechanical Properties of Ternary Polymer Blends},
  journal = {International Journal of Materials Science and Applications},
  volume = {4},
  number = {1},
  pages = {39-46},
  doi = {10.11648/j.ijmsa.20150401.18},
  url = {https://doi.org/10.11648/j.ijmsa.20150401.18},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20150401.18},
  abstract = {Polymer blends are capable of providing materials with extended useful properties beyond the range that can be obtained from single polymer. Blends of polystyrene (PS) and polypropylene (PP) with adding acrylonitrile-butadiene-styrene (ABS) or ethylene propylene diene monomer (EPDM) are prepared in different ratios by melt blending technique which was carried out using a double screw extruder. The tensile, flexural, impact and hardness tests of all the prepared samples were study. The results from this work show that the elongation property and impact properties for blend system increase with increase PP content in polymer blend of (PS:PP), also increase value of these properties with increase the ratio of adding (ABS or EPDM) for polymer blend (PS:5%PP).The highest values of impact strength was (10.68Kj/m2) for ternary polymers blend (90%PS:5%PP:5%EPDM) and the high values of fracture toughness (6.125MPa√m ) for ternaty polymer blend (90%PS:5%PP:5%ABS).},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - Evaluation of Addition ABS and EPDM Effect on the Mechanical Properties of Ternary Polymer Blends
AU  - Sihama Issa Salih
AU  - Jawad Kadhum Oleiwi
AU  - Rawaa Adnan Abdle Ameer
Y1  - 2015/01/28
PY  - 2015
N1  - https://doi.org/10.11648/j.ijmsa.20150401.18
DO  - 10.11648/j.ijmsa.20150401.18
T2  - International Journal of Materials Science and Applications
JF  - International Journal of Materials Science and Applications
JO  - International Journal of Materials Science and Applications
SP  - 39
EP  - 46
PB  - Science Publishing Group
SN  - 2327-2643
UR  - https://doi.org/10.11648/j.ijmsa.20150401.18
AB  - Polymer blends are capable of providing materials with extended useful properties beyond the range that can be obtained from single polymer. Blends of polystyrene (PS) and polypropylene (PP) with adding acrylonitrile-butadiene-styrene (ABS) or ethylene propylene diene monomer (EPDM) are prepared in different ratios by melt blending technique which was carried out using a double screw extruder. The tensile, flexural, impact and hardness tests of all the prepared samples were study. The results from this work show that the elongation property and impact properties for blend system increase with increase PP content in polymer blend of (PS:PP), also increase value of these properties with increase the ratio of adding (ABS or EPDM) for polymer blend (PS:5%PP).The highest values of impact strength was (10.68Kj/m2) for ternary polymers blend (90%PS:5%PP:5%EPDM) and the high values of fracture toughness (6.125MPa√m ) for ternaty polymer blend (90%PS:5%PP:5%ABS).
VL  - 4
IS  - 1
ER  -

Copy | Download

Author Information

Sihama Issa Salih

Materials Engineering Department, University of Technology, Baghdad, Iraq
Jawad Kadhum Oleiwi

Materials Engineering Department, University of Technology, Baghdad, Iraq
Rawaa Adnan Abdle Ameer

Materials Engineering Department, University of Technology, Baghdad, Iraq

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Sihama Issa Salih, Jawad Kadhum Oleiwi, Rawaa Adnan Abdle Ameer. (2015). Evaluation of Addition ABS and EPDM Effect on the Mechanical Properties of Ternary Polymer Blends. International Journal of Materials Science and Applications, 4(1), 39-46. https://doi.org/10.11648/j.ijmsa.20150401.18

Copy | Download

ACS Style

Sihama Issa Salih; Jawad Kadhum Oleiwi; Rawaa Adnan Abdle Ameer. Evaluation of Addition ABS and EPDM Effect on the Mechanical Properties of Ternary Polymer Blends. Int. J. Mater. Sci. Appl. 2015, 4(1), 39-46. doi: 10.11648/j.ijmsa.20150401.18

Copy | Download

AMA Style

Sihama Issa Salih, Jawad Kadhum Oleiwi, Rawaa Adnan Abdle Ameer. Evaluation of Addition ABS and EPDM Effect on the Mechanical Properties of Ternary Polymer Blends. Int J Mater Sci Appl. 2015;4(1):39-46. doi: 10.11648/j.ijmsa.20150401.18

Copy | Download

@article{10.11648/j.ijmsa.20150401.18,
  author = {Sihama Issa Salih and Jawad Kadhum Oleiwi and Rawaa Adnan Abdle Ameer},
  title = {Evaluation of Addition ABS and EPDM Effect on the Mechanical Properties of Ternary Polymer Blends},
  journal = {International Journal of Materials Science and Applications},
  volume = {4},
  number = {1},
  pages = {39-46},
  doi = {10.11648/j.ijmsa.20150401.18},
  url = {https://doi.org/10.11648/j.ijmsa.20150401.18},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20150401.18},
  abstract = {Polymer blends are capable of providing materials with extended useful properties beyond the range that can be obtained from single polymer. Blends of polystyrene (PS) and polypropylene (PP) with adding acrylonitrile-butadiene-styrene (ABS) or ethylene propylene diene monomer (EPDM) are prepared in different ratios by melt blending technique which was carried out using a double screw extruder. The tensile, flexural, impact and hardness tests of all the prepared samples were study. The results from this work show that the elongation property and impact properties for blend system increase with increase PP content in polymer blend of (PS:PP), also increase value of these properties with increase the ratio of adding (ABS or EPDM) for polymer blend (PS:5%PP).The highest values of impact strength was (10.68Kj/m2) for ternary polymers blend (90%PS:5%PP:5%EPDM) and the high values of fracture toughness (6.125MPa√m ) for ternaty polymer blend (90%PS:5%PP:5%ABS).},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - Evaluation of Addition ABS and EPDM Effect on the Mechanical Properties of Ternary Polymer Blends
AU  - Sihama Issa Salih
AU  - Jawad Kadhum Oleiwi
AU  - Rawaa Adnan Abdle Ameer
Y1  - 2015/01/28
PY  - 2015
N1  - https://doi.org/10.11648/j.ijmsa.20150401.18
DO  - 10.11648/j.ijmsa.20150401.18
T2  - International Journal of Materials Science and Applications
JF  - International Journal of Materials Science and Applications
JO  - International Journal of Materials Science and Applications
SP  - 39
EP  - 46
PB  - Science Publishing Group
SN  - 2327-2643
UR  - https://doi.org/10.11648/j.ijmsa.20150401.18
AB  - Polymer blends are capable of providing materials with extended useful properties beyond the range that can be obtained from single polymer. Blends of polystyrene (PS) and polypropylene (PP) with adding acrylonitrile-butadiene-styrene (ABS) or ethylene propylene diene monomer (EPDM) are prepared in different ratios by melt blending technique which was carried out using a double screw extruder. The tensile, flexural, impact and hardness tests of all the prepared samples were study. The results from this work show that the elongation property and impact properties for blend system increase with increase PP content in polymer blend of (PS:PP), also increase value of these properties with increase the ratio of adding (ABS or EPDM) for polymer blend (PS:5%PP).The highest values of impact strength was (10.68Kj/m2) for ternary polymers blend (90%PS:5%PP:5%EPDM) and the high values of fracture toughness (6.125MPa√m ) for ternaty polymer blend (90%PS:5%PP:5%ABS).
VL  - 4
IS  - 1
ER  -

Copy | Download