Electrical and Mechanical Properties of Microwave Sintered Cu-ZrO2 (8-YSZ) Nano-Composites
International Journal of Materials Science and Applications
Volume 4, Issue 4, July 2015, Pages: 261-265
Received: Jun. 14, 2015; Accepted: Jun. 26, 2015; Published: Jul. 8, 2015
Views 3706      Downloads 102
Authors
Mahmood Khaloobagheri, The American Association for Science and Technology (AASCIT), Wilmington, USA
Marjan Darabi, Materials Science and Engineering Department, Imam Khomaini International University, Qazvin, Iran
Shima Abdollahi Barfjan, Electrical Engineering Department, Imam Khomaini International University, Qazvin, Iran
Article Tools
Follow on us
Abstract
Metal matrix nano-composites containing copper and ZrO2 (8-YSZ) were sintered by microwave using mixtures of Cu and 1 wt.%, 2 wt.%, 3 wt.%, 4 wt.% and 5 wt.% of zirconia powders for 20min. The zirconia content up to 5 wt.%, resulted in an increase of 62.5% and 21.9% in micro-hardness and compressive strength respectively, and slight decrease in relative density and electrical conductivity (% IACS). In addition, field emission scanning electron micros copy (FESEM) and SEM fitted with EDX were used to characterize the sintered nano-composites.
Keywords
Cu-ZrO2, Metal Matrix Nano-Composite, Microwave Sintering, Electrical Conductivity
To cite this article
Mahmood Khaloobagheri, Marjan Darabi, Shima Abdollahi Barfjan, Electrical and Mechanical Properties of Microwave Sintered Cu-ZrO2 (8-YSZ) Nano-Composites, International Journal of Materials Science and Applications. Vol. 4, No. 4, 2015, pp. 261-265. doi: 10.11648/j.ijmsa.20150404.16
References
[1]
M.Khaloobagheri, B. Janipour, N. Askari,& E. Shafiee Kamal Abad, "Characterisation of Powder Metallurgy Cu-ZrO2 Composites". J. Advances in Production Engineering & Management, Vol. 8, pp. 242-248, 2013.
[2]
M. Khaloobagheri, B. Janipour,& N.Askari, "The Effect of Milling Time on Properties and Microstructures of Cu-yttria Stabilized Zirconia Composites Fabricated by Powder Metallurgy".Advanced Materials World Congress, Izmir, Turkey, 2013.
[3]
H. Conrad, J. Narayan, "On the Grain Size Softening in Nanocrystalline Materials". Script Material, 42, pp. 1025-1030, 2000.
[4]
M. Rajabi, M.M. Khodai, N. Askari, B. Mirhadi,& H. Oveisi, "Evaluation of Time Effect on Mechanical Properties of Al-ZrO2 Nano-Composites Produced by Microwave Sintering". Iran International Aluminum Conference, Arak, Iran, 2012.
[5]
M. Khaloobagheri, S. Abdollahi Barfjan (2015)." The Effect of Milling Time on Properties and Microstructure of Cu-Yttria Stabilized Zirconia Composites Fabricated by Powder Metallurgy ". J. Journal of Materials Sciences and Applications, Vol. 1, 78-84.
[6]
M. Rajabi, R. Moradiclardeh,& S.M. Mosavian, "Synthesis of Al-ZrO2 Composite Materials by the Stir-Casting Method".Iran International Aluminum Conference, Tehran, Iran, 2009.
[7]
A. Mondal, D. Agrawal& A. Upadhyaya,"Microwave Heating of Pure Copper Powder with Varying Particle Size and Porosity".Journal of Microwave Power & Electromagnetic Energy, 43, pp. 5-10, 2000.
[8]
P. Yadoji, R. Peelamedu, D. Agrawal,& R. Roy,"Microwave Sintering of Ni-Zn Ferrites: Comparison with Conventional Sintering".Materials Science and Engineering B, 98, pp. 269-278, 2003.
[9]
D. E. Clark, D. C. Folz,&J. K. West, "Processing Materials with Microwave Energy". Materials Science and Engineering A, 287, pp. 153-158, 2000.
[10]
C. Leonelli, P. Veronesi, L. Denti, A. Gatto,& L. Iuliano,"Microwave-ssisted Sintering of Green Metal Parts".Journal of Materials Processing Technology, 205, pp. 489-496, 2008.
[11]
S. J. Hwang, "Compressive Yield Strength of the Nano- crystalline Cu with Al2O3Dispersoid". Journal of Alloys and Compounds, 509, pp. 2355-2359, 2011.
[12]
M. Rajabi,"Characterization of Al-SiCCompositeMaterials Producedby Double Pressing-Double Sintering Method". Int. J. Eng.Sci. 14, pp. 89-110, 2003.
[13]
M. Khaloobagheri, B. Janipour,&N. Askari, "Electrical and Mechanical Properties of Cu Matrix Nanocomposites Reinforced with Yttria - Stabilized Particles Fabricated by Powder Metallurgy". Advanced Materials Research, Vol. 829, pp. 610-615, 2014.
[14]
CelebiEfe G., Zeytin, S.,&Bindal., C, "The Effect of SiC Particle Size on the Properties of Cu-SiC Composites". Materials and Design, 2011.
[15]
CelebiEfe G, Altinsoy İ, Yener T, İpek M, Zeytin S,&Bindal, C,"An Investigation on Cemented Cu Reinforced by SiC Particles". Proceedings of ICAMMM, Sultan Qaboos University, Oman, 2010.
[16]
Richerson DW, (Ed.), Modern ceramic engineering :Taylor & Francis CRC Press. , 2006.
[17]
C.A. Schuh, T.G. Nieh,"Hardness and Abrasion Resistance of NanocrystallineNickelAlloys Near the Hall-PetchBreakdownRegime". Proc. of Symposium I Nanomaterials for Structural Applications, Boston, USA, pp. 27-32, 2003.
[18]
G.F. CelebiEfe, "Development of conductive copper composites reinforced with Sic".Ph.D. thesis, SakaryaUniversity, 2010.
[19]
A. Slipenyuk, V. Kuprin, Yu.Milman,V. Goncharuk& J. Eckert, "Properties of P/M processed particle reinforced metal matrix composites specified by reinforcement concentration and matrix-to-reinforcement particle size ratio".ActaMaterialia, vol.54, pp.157–166, 2006.
ADDRESS
Science Publishing Group
548 FASHION AVENUE
NEW YORK, NY 10018
U.S.A.
Tel: (001)347-688-8931