Optics

| Peer-Reviewed |

Effect of preparation condition on the optical properties of transparent conducting oxide based on zinc oxide

Received: 11 October 2014    Accepted: 20 October 2014    Published: 22 September 2015
Views:       Downloads:

Share This Article

Abstract

Thin films of Al2ZnO4 were prepared using DC sputtering technique at room temperature. One set of the films of different thicknesses were prepared under the same condition of preparation, another one was prepared under different rate of flow of argon, the last set was prepared under different pressure of the gas. The optical energy gap, Urbach tails, refractive index of the films, single oscillator energy and dispersion energy were studied. The effect of changing the condition of preparation on the optical constants was investigated.

DOI 10.11648/j.optics.20150403.11
Published in Optics (Volume 4, Issue 3, June 2015)
Page(s) 17-24
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Tin Film, Sputtering, Optical Gap, Refractive Index, Urbach Tails, Dispersion Energy

References
[1] Jeong Soo, and Kyung Hwan Kim, Transaction on electrical and electronic materials 2(2) (2011) 76-79.
[2] B. Szyszka, Thin Solid Films 351 (1999) 164.
[3] O. Kluth, B. Rech, L. Houben, S. Wagner, A. Loffi, H. W. Schock, Thin Solid Films, 352 (1999) 247.
[4] M. J. Alam, D. C. Cameron, J. Vac. Sci. Technol. A 19(4) (2001) 1642.
[5] M. J. Alam, D. C. Cameron, Surf. Coat. Technol 142-144 (2001) 776.
[6] P. Nunes, E. Fortunato, P. Tonello, F. Braz Fernandez, P. Vilarinho, R. Martins, Vacuum 64 (2002) 281.
[7] T. Minami, S. Susuki, T. Miyata, Thin Solid Films 398-399 (2001) 53.
[8] M. Bertolotti, M. V. Laschena, M. Rossi, A. Ferrari, L. S. Qian, F. Quaranta, A. Valentini, J. Mater. Res. 5 ((9) (1990) 1929.
[9] K. –S. Weibenrieder, J. MuEller, Thin Solid Films 300 (1997) 3.
[10] J. L. Deschanvres, B. Bochu, J. C. Joubert, J. Phys. 4(3) (1993) 485.
[11] J. Yoo, J. Lee, S. Kim, K. Yoon, I. Jun Park, S. K. Dhungel, B. Karunagaran, D. Mangalaraj, Junsin Yi, Thin Solid Films 480-481 (2005) 213-217.
[12] J.-H. Lee, B.-O. Park, Mater. Sci. Eng. B 106 (2004) 242.
[13] S. Major, S. Kumar, M. Bhatnagar, K. L. Chopra, Appl. Hys. Lett. 49 (1986) 394.
[14] S. H. Mohamed, H. M. Ali, H. A. Mohamed, A. M. Salim, Eur. Phys. J. Appl. Phys. 31 (2005) 95-99.
[15] A. E. Jimenez-Gonzalez, J. A. S. Urueta, R. Suarez-Parra, J. Cryst. Growth 192 (1998) 430-43.
[16] Y. Cao, L. Miao, S. Tanemura, M. Tanemura, Y. Kuno, Y. Hayashi, and Y. Mori, J. Appl. Phys. 45 (2006) 1623-1628.
[17] W. W. Wenas, A. Yamada, M. Konagai, K. Takahashi, Jpn. J. Appl. Phys. 30 (1991) L441.
[18] T. Tsuchiya, T. Emoto, T. Sei, J. Non-Cryst. Solids 178 (1994) 327.
[19] M. de la, L Olvera, A. Maldonado, R. Asomoza, M. Mele ndez-Lira, Sol. Energy mater, Sol. Cells 71 (2002) 61.
[20] J. A. Anna Selvan, H. Keppner, A. Shah, mater. Res. Soc. Symp. Proc. 426 (1996) 497.
[21] J. C. Hsu, C. C. Lee, Appl. Opt/ 37 (1998) 1171.
[22] U. Pal, D. Samanta, S. Ghori, and A. K. Chaudhuri, J. Appl. Phys. 74 (10) (1993) 6368.
[23] H. M. Ali, Phys. Status Solidi A 202, (2005) 2742.
[24] M.M. El-Nahass, J. Mater. Sci. 27 (1992) 6592.
[25] A.M. Bakry, A.H. El-Naggar, Thin Solid Films 360 (2000) 293.
[26] F. Urbach, Phys. Rev. 92 (1953) 1324.
[27] S. H. Wemple and DiDomenco. Rev. B7 (1973) 3767.
[28] T. Tsuji, and M. Hirohashi, Appl. Surf. Sci. 157 (200) 47.
[29] J. Y. Seto, J. Appl. Phys 26 (1975) 5247.
[30] M. D. Barankin, E. Gonzalez II, A. M. Ladwing, R. F. Hicks, Solar Energy Materials & Solar Cells 91 (2007) 924-930.
[31] S.H. Jeong, J.W. Lee, S.B. Lee, J.H. Boo, Thin Solid Films 435 (2003) 78–82.
[32] Yunus Akaltun, M. Ali Yıldırım, Aytunç Ateş Muhammet Yıld, Optics Communications 284 (2011) 2307–2311.
[33] M. M. Abd El-Raheem, H. M. Ali, N. M. El-Husainy, Journal of optoelectronics and advanced materials 11 (2009) 813-819.
[34] B. A. Mansour, H. Shaban, S. A. Gad, Y. A. El-Gendy, A. M.Salem, Journal of Ovonic Research,Vol. 6, No.1,( 2010), p. 13 – 22.
[35] Chin-Chiuan Kuo, Chi-Chang Liu, Shao-Chih He, Jing-Tang Chang, and Ju-Liang He, Journal of nanomaterials, volume 2012, article ID 562701, 8 pages.
[36] J. Yoo, J. Lee, S. Kim, K. Yoon, I. Jun Park, S. K. Dhungel, B. Karunagaran, D. Mangalaraj, Junsin Yi, Thin Solid Films 480-481 (2005) 213-217.
[37] Yasuhiro Igasaki, Hirokazu Kanma, Applied Surface Science 169-170 (2001) 508-511.
[38] V. Assuncao , E. Fortunato *, A. Marques , H. Aguas , I. Ferreira , M.E.V. Costa , R. Martins, Thin Solid Films 427 (2003) 401–405.
Author Information
  • Physics Department, Faculty of Science, Taif University, Taif, Saudi Arabia; Physics Department, Faculty of Science, Sohag University, Sohag, Egypt

  • Physics Department, Faculty of Science, Taif University, Taif, Saudi Arabia

  • Physics Department, Faculty of Science, Taif University, Taif, Saudi Arabia

  • Physics Department, Faculty of Science, Taif University, Taif, Saudi Arabia

Cite This Article
  • APA Style

    Mostafa Mohamed Abd El-Raheem, Hoda Hamid Al-Ofi, Abdullah Alhuthali, Ateyyah Moshrif AL-Baradi. (2015). Effect of preparation condition on the optical properties of transparent conducting oxide based on zinc oxide. Optics, 4(3), 17-24. https://doi.org/10.11648/j.optics.20150403.11

    Copy | Download

    ACS Style

    Mostafa Mohamed Abd El-Raheem; Hoda Hamid Al-Ofi; Abdullah Alhuthali; Ateyyah Moshrif AL-Baradi. Effect of preparation condition on the optical properties of transparent conducting oxide based on zinc oxide. Optics. 2015, 4(3), 17-24. doi: 10.11648/j.optics.20150403.11

    Copy | Download

    AMA Style

    Mostafa Mohamed Abd El-Raheem, Hoda Hamid Al-Ofi, Abdullah Alhuthali, Ateyyah Moshrif AL-Baradi. Effect of preparation condition on the optical properties of transparent conducting oxide based on zinc oxide. Optics. 2015;4(3):17-24. doi: 10.11648/j.optics.20150403.11

    Copy | Download

  • @article{10.11648/j.optics.20150403.11,
      author = {Mostafa Mohamed Abd El-Raheem and Hoda Hamid Al-Ofi and Abdullah Alhuthali and Ateyyah Moshrif AL-Baradi},
      title = {Effect of preparation condition on the optical properties of transparent conducting oxide based on zinc oxide},
      journal = {Optics},
      volume = {4},
      number = {3},
      pages = {17-24},
      doi = {10.11648/j.optics.20150403.11},
      url = {https://doi.org/10.11648/j.optics.20150403.11},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.optics.20150403.11},
      abstract = {Thin films of Al2ZnO4 were prepared using DC sputtering technique at room temperature. One set of the films of different thicknesses were prepared under the same condition of preparation, another one was prepared under different rate of flow of argon, the last set was prepared under different pressure of the gas. The optical energy gap, Urbach tails, refractive index of the films, single oscillator energy and dispersion energy were studied. The effect of changing the condition of preparation on the optical constants was investigated.},
     year = {2015}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Effect of preparation condition on the optical properties of transparent conducting oxide based on zinc oxide
    AU  - Mostafa Mohamed Abd El-Raheem
    AU  - Hoda Hamid Al-Ofi
    AU  - Abdullah Alhuthali
    AU  - Ateyyah Moshrif AL-Baradi
    Y1  - 2015/09/22
    PY  - 2015
    N1  - https://doi.org/10.11648/j.optics.20150403.11
    DO  - 10.11648/j.optics.20150403.11
    T2  - Optics
    JF  - Optics
    JO  - Optics
    SP  - 17
    EP  - 24
    PB  - Science Publishing Group
    SN  - 2328-7810
    UR  - https://doi.org/10.11648/j.optics.20150403.11
    AB  - Thin films of Al2ZnO4 were prepared using DC sputtering technique at room temperature. One set of the films of different thicknesses were prepared under the same condition of preparation, another one was prepared under different rate of flow of argon, the last set was prepared under different pressure of the gas. The optical energy gap, Urbach tails, refractive index of the films, single oscillator energy and dispersion energy were studied. The effect of changing the condition of preparation on the optical constants was investigated.
    VL  - 4
    IS  - 3
    ER  - 

    Copy | Download

  • Sections