| Peer-Reviewed

Electrical and Photoelectrical Properties of Copper (II) Complex/n-Si/Au Heterojunction Diode

Received: 28 August 2014    Accepted: 6 October 2014    Published: 15 January 2015
Views:       Downloads:
Abstract

In this study, we fabricated copper(II) complex/n-Si/Au organic-inorganic heterojunction diode by forming copper(II) complex thin film on n-type silicon. A direct optical band gap energy values of the copper(II) complex (Cu2C34H34N2O21Cl4) thin film on a glass substrate was obtained as Eg=2.98 eV. The current-voltage (I-V) measurement of the diode was carried out at room temperature and under dark. The ideality factor n and barrier height ϕb values of the diode were found to be 3.17 and 0.71 eV, respectively. The diode indicates non-ideal current-voltage characteristics due to the high ideality factor greater than unity. The series resistance Rs and ideality factor n values were determined using Cheung’s method and obtained as 5.54 kΩ and 3.81, respectively. The capacitance-voltage (C-V) measurements of the diode were performed at different frequency and room temperature. From the analysis of the C-V measurements carrier concentration Nd, diffusion potential Vd and barrier height values ϕbc-v were determined as 2.79x1015 cm-3, 1.078 V, 1.31 eV, respectively. From the I-V measurements of the diode under 1.5 AM illumination, short circuit current (Isc) and open circuit voltage (Voc) have been extracted as 12.8 µA and 153 mV, respectively.

Published in American Journal of Optics and Photonics (Volume 2, Issue 6)
DOI 10.11648/j.ajop.20140206.11
Page(s) 69-74
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Organic-İnorganic, Heterojunction, Schottky Contact, Photovoltaic Properties

References
[1] M.M. El-Nahass, H.S. Metwally, H.E.A. El-Sayed, A.M. Hassanien, Materials Chemistry and Physics 133 (2012) 649– 654.
[2] K. Akkılıç, Y.S. Ocak, T. Kılıcoğlu, S. İlhan, H. Temel, Current App. Physics 10 (2010) 337–341.
[3] T. Kılıcoğlu, Y.S. Ocak, Microelectronic Engineering 88 (2011) 150–154.
[4] A.R. Vearey–Roberts, D.A. Evans, Appl. Phys. Lett. 86 (2005) 072105.
[5] A.A.M. Farag, W.G. Osiris, I.S. Yahia, Synthetic Metals, Volume 161, Issues 17–18, September 2011, Pages 1805-1812.
[6] R.K. Gupta, K. Ghosh, P.K. Kahol, Physica E 41 (2009) 1832.
[7] F. Yakuphanoglu, B.F. Senkal, Synth. Met. 159 (2009) 311.
[8] B. O’Regan, M. Gratzel, Nature 353 (1991) 737.
[9] Ö. Güllü, A.Türüt, Sol.Energy Mater. Sol. Cells 92 (2008) 1205.
[10] M.M. El-Nahass, H.M. Zeyada, K.F. Abd-El-Rahman, A.A.A. Darwish, Sol. Energy Mater. Sol. Cells 91 (2008) 1120.
[11] N.D. Kumar, M.P. Joshi, C.S. Friend, P.N. Prasad, R. Burzynski, Appl. Phys. Lett. 71 (1997) 1388.
[12] S. Guha, R.A. Haight, N.A. Bojarczuk, D.W. Kisker, J. Appl. Phys. 82 (1997) 4126.
[13] R.K. Gupta, R.A. Singh, J. Polym. Res. 11 (2004) 269.
[14] A. Ashery, A.A.M. Farag, M.A. Salem, Microelectron. Eng. 85 (2008) 2309.
[15] T. Kılıcoğlu, Thin Solid Films 516 (2008) 967.
[16] Kemal Akkılıç, Fahrettin Yakuphanoglu, Microelectronic Engineering 85 (2008) 1826–1830.
[17] S. İlhan. Journal of Coordination Chemistry 61 (2008) 2884–2895.
[18] Sze S M and Kwok K Ng 2007 Physics of SemiconductorDevices 3rd edn (NJ: Wiley)
[19] E. H. Rhoderick and R. H. Williams, Metal-Semiconductor Contacts 2nd ed. (Clarendon, Oxford, 1988).
[20] R.T. Tung, Phys. Rev. B 45 (23) (1992) 13509.
[21] M. Sağlam, F.E. Cimilli, A. Türüt, Physica B 348 (2004) 397–403.
[22] M. Cakar, C. Temirci, A. Turut, Synth. Met. 142 (2004) 177.
[23] A.A.M. Farag, E.A.A. El–Shazly, M. Abdel Rafea, A. Ibrahim, Sol. Energy Mater. Sol. Cells 93 (2009) 1853-1859.
[24] S.K. Cheung, N.W. Cheung, Appl. Phys. Lett. 49 (1986) 85.
[25] P. Chattopadhyay, Solid-State Electron. 37 (1994) 1759.
[26] F. Yakuphanoglu, Solar Energy Mater, Solar Cells 91 (13) (2007) 1182.
Cite This Article
  • APA Style

    Cihat Ozaydin, Kemal Akkilic. (2015). Electrical and Photoelectrical Properties of Copper (II) Complex/n-Si/Au Heterojunction Diode. American Journal of Optics and Photonics, 2(6), 69-74. https://doi.org/10.11648/j.ajop.20140206.11

    Copy | Download

    ACS Style

    Cihat Ozaydin; Kemal Akkilic. Electrical and Photoelectrical Properties of Copper (II) Complex/n-Si/Au Heterojunction Diode. Am. J. Opt. Photonics 2015, 2(6), 69-74. doi: 10.11648/j.ajop.20140206.11

    Copy | Download

    AMA Style

    Cihat Ozaydin, Kemal Akkilic. Electrical and Photoelectrical Properties of Copper (II) Complex/n-Si/Au Heterojunction Diode. Am J Opt Photonics. 2015;2(6):69-74. doi: 10.11648/j.ajop.20140206.11

    Copy | Download

  • @article{10.11648/j.ajop.20140206.11,
      author = {Cihat Ozaydin and Kemal Akkilic},
      title = {Electrical and Photoelectrical Properties of Copper (II) Complex/n-Si/Au Heterojunction Diode},
      journal = {American Journal of Optics and Photonics},
      volume = {2},
      number = {6},
      pages = {69-74},
      doi = {10.11648/j.ajop.20140206.11},
      url = {https://doi.org/10.11648/j.ajop.20140206.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajop.20140206.11},
      abstract = {In this study, we fabricated copper(II) complex/n-Si/Au organic-inorganic heterojunction diode by forming copper(II) complex thin film on n-type silicon. A direct optical band gap energy values of the copper(II) complex (Cu2C34H34N2O21Cl4) thin film on a glass substrate was obtained as Eg=2.98 eV. The current-voltage (I-V) measurement of the diode was carried out at room temperature and under dark. The ideality factor n and barrier height ϕb values of the diode were found to be 3.17 and 0.71 eV, respectively. The diode indicates non-ideal current-voltage characteristics due to the high ideality factor greater than unity. The series resistance Rs and ideality factor n values were determined using Cheung’s method and obtained as 5.54 kΩ and 3.81, respectively. The capacitance-voltage (C-V) measurements of the diode were performed at different frequency and room temperature. From the analysis of the C-V measurements carrier concentration Nd, diffusion potential Vd and barrier height values ϕbc-v were determined as 2.79x1015 cm-3, 1.078 V, 1.31 eV, respectively. From the I-V measurements of the diode under 1.5 AM illumination, short circuit current (Isc) and open circuit voltage (Voc) have been extracted as 12.8 µA and 153 mV, respectively.},
     year = {2015}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Electrical and Photoelectrical Properties of Copper (II) Complex/n-Si/Au Heterojunction Diode
    AU  - Cihat Ozaydin
    AU  - Kemal Akkilic
    Y1  - 2015/01/15
    PY  - 2015
    N1  - https://doi.org/10.11648/j.ajop.20140206.11
    DO  - 10.11648/j.ajop.20140206.11
    T2  - American Journal of Optics and Photonics
    JF  - American Journal of Optics and Photonics
    JO  - American Journal of Optics and Photonics
    SP  - 69
    EP  - 74
    PB  - Science Publishing Group
    SN  - 2330-8494
    UR  - https://doi.org/10.11648/j.ajop.20140206.11
    AB  - In this study, we fabricated copper(II) complex/n-Si/Au organic-inorganic heterojunction diode by forming copper(II) complex thin film on n-type silicon. A direct optical band gap energy values of the copper(II) complex (Cu2C34H34N2O21Cl4) thin film on a glass substrate was obtained as Eg=2.98 eV. The current-voltage (I-V) measurement of the diode was carried out at room temperature and under dark. The ideality factor n and barrier height ϕb values of the diode were found to be 3.17 and 0.71 eV, respectively. The diode indicates non-ideal current-voltage characteristics due to the high ideality factor greater than unity. The series resistance Rs and ideality factor n values were determined using Cheung’s method and obtained as 5.54 kΩ and 3.81, respectively. The capacitance-voltage (C-V) measurements of the diode were performed at different frequency and room temperature. From the analysis of the C-V measurements carrier concentration Nd, diffusion potential Vd and barrier height values ϕbc-v were determined as 2.79x1015 cm-3, 1.078 V, 1.31 eV, respectively. From the I-V measurements of the diode under 1.5 AM illumination, short circuit current (Isc) and open circuit voltage (Voc) have been extracted as 12.8 µA and 153 mV, respectively.
    VL  - 2
    IS  - 6
    ER  - 

    Copy | Download

Author Information
  • Department of Physics, Faculty of Science and Art, University of Batman, Batman, Turkey

  • Department of Physics, Faculty of Education, University of Dicle, 21280 Diyarbak?r, Turkey

  • Sections