The location estimation capability of a RFID (Radio Frequency Identification) technology is useful for indoor navigation systems on mobile robots. In this paper, we study a simple and small structural antenna at 2.5GHz band that can reduce the beam when installed on a mobile robot. An antenna with small occupation volume by a mechanical rotation is assumed. We used electromagnetic field simulation and experimental results to design a simple structural antenna. Our design culminates in two antennas comprised of Tetragon elements formed with wires. One is called Tetra-4, and is an antenna which has a lateral arrangement of four tetragons. Because the input impedance is considerably high, Tetra-4 is suitable for use in the high impedance system. When driving in 100 Ωbalanced system, the gain of Tetra-4 is 8dBi. The half-power band width (HPBW) in the H-plane is 38 degrees, and is 0.44 times that of a dipole with a reflector. Another one is Yagi-Uda antenna comprised of two tetragon elements. When driving in 50 Ωbalanced system, the gain is 11dBi. The HPBW is 40 degrees in the H-plane and is 36 degrees in the E-plane.
| Published in | International Journal of Wireless Communications and Mobile Computing (Volume 3, Issue 2) |
| DOI | 10.11648/j.wcmc.20150302.11 |
| Page(s) | 13-17 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Array Antenna, Tetragon, Loop Antenna, RFID, Location Estimation, Mobile Robot
| [1] | Finkenzeller, G. K., RFID Handbook., Radio-frequency identification fundamentals and applications, John Wiley & Son, Chichester, 1999. |
| [2] | Hähnel D., Burgard W., Fox D., Fishkin K., and Philipose M., “Mapping and localization with RFID technology,” Proc. 2004 IEEE International Conference on Robotics and Automation, vol. 1, pp. 1015-1020, New Orleans, USA, Apr. 2004. |
| [3] | Manzoor F., Huang Y., and Menzel K., “Passive RFID-based indoor positioning system, an algorithm approach,” Proc. IEEE International Conference on RFID-Technology and Applications, Guangzhou, China, Jun. 2010. |
| [4] | DiGiampaolo E., and Martinelli F., “A passive UHF-RFID system for the localization of an indoor autonomous vehicle,” IEEE Transactions on Industrial Electronics, vol. 59, no. 10, pp. 3961-3970, Oct. 2012. |
| [5] | Wada T., Hori T., Fujimoto M., Mutsuura K., and Okada, H. “An adaptive multi-range-sensing method for 3D localization of passive RFID tags,” IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, vol. E95-A, no. 6, pp. 1074-1083, Jun. 2012. |
| [6] | Fujimoto M., Wada T., Inada A., Nakamori E., Oda Y., Mutsuura K., and Okada H., “Localization of passive RFID tags by using broad-type multi-sensing-range (B-MSR) method,” IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, vol. E95-A, No. 7, pp. 1164-1174, Jul. 2012. |
| [7] | Fujimoto M., Wada T., Inada A., Mutsuura K., and Okada H., “Swift communication range recognition method for quick and accurate position estimation of passive RFID tags,” IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, vol. E95-A, no. 9, pp. 1596-1605, Sep. 2012. |
| [8] | Kulyukin V., Gharpure C., Nicholson J., and Pavithran S., “RFID in robot-assisted indoor navigation for the visually impaired,” Proc. 2004 IEEE/RSJ International Conference on Intelligent Robots and System, vol. 2, pp. 1979-1984, Sendai, Japan, Oct. 2004. |
| [9] | Gueaieb W., and Miah S., “An intelligent mobile robot navigation technique using RFID technology,” IEEE Trans. Instrum. Meas., vol. 57, no. 9, pp. 1908-1917, Sep. 2008 |
| [10] | Zou J., and Wang L., “Research of navigation and positioning at local area based on RFID,” Proc. 2010 International Conference on Computer Application and System Modeling, vol. 11, pp. 5-8, Taiyuan, China, Oct. 2010. |
| [11] | Fujimoto M., Nakamori E., Tsukuda D., Wada T., Mutsuura K., Okada H., and Iida Y., “A new indoor robot navigation system using RFID technology,” Proc. 4th International Conference on Indoor Positioning and Indoor Navigation (IPIN 2013), pp. 637-638, Montbéliard, France, Oct. 2013. |
| [12] | Park S., and Lee H., “Self-recognition of vehicle position using UHF passive RFID tags,” IEEE Transactions on Industrial Electronics, vol. 60, No. 1, pp. 226-234, Jan. 2013. |
| [13] | Ahmad M. Y., and Mohan A. S., “Novel bridge-loop reader for positioning with HF RFID under sparse tag grid,” IEEE Transactions on Industrial Electronics, vol. 61, No. 1, pp. 555-566, Jan. 2014. |
| [14] | Nagao R., Fujimoto M., Tsukuda D., Nakanishi T., Wada T., Mutsuura K., and Okada H., “Routing and moving control method using passive RFID for robot navigation system,” Proc. 8th Annual IEEE International Conference on RFID (IEEE RFID 2014), pp.68-69, Orlando, USA, Apr. 2014. |
| [15] | Wang J., Sang L., Wang Z., Xu R., and Yan B., “A broadband quasi-yagi array of rectangular loops on LTCC,” Int. J. RF Microw Comput－Aided Eng, vol.24, no.2, pp.196-203, Mar. 2014. |
| [16] | Kim S. -G., Zepeda P., and Chang K., “Piezoelectric transducer controlled multiple beam phased array using microstrip rotman lens,” IEEE Microwave Wireless Compon. Lett., vol.15, no.4, pp.247-249, Apr. 2005. |
| [17] | Li M., and Luk K.-M., “A low-profile unidirectional printed antenna for millimeter-wave applications,” IEEE Trans Antennas Propag., no.3, pp.1232-1237, Mar. 2014. |
| [18] | Tsutsumi Y., Ito T., Hashimoto K., Obayashi S., Shoki H., and Kasami H., ”Bonding wire loop antenna in standard ball grid array package for 60-GHz short-range wireless communication,“ IEEE Trans Antennas Propag, vol.61, no.4, Pt.1, pp.1557-1563, Apr. 2013. |
| [19] | Haider N., Caratelli D., and Yarovoya G., “Circuital characteristics and radiation properties of an UWB electric-magnetic planar antenna for Ku-band applications,” Radio Sci., vol.48, no.1, pp.13-2, Jan. 2013. |
| [20] | Yuan X., Wong K. T., Xu Z., and Agrawal K., “Various compositions to form a triad of collocated dipoles/loops, for direction finding and polarization estimation,” IEEE Sens J., vol.12, no.5－6, pp.1763-1771, May 2012. |
| [21] | Yasin M. N. M., and Khamas S. K., “Measurements and analysis of a probe-fed circularly polarized loop antenna printed on a layered dielectric sphere,” IEEE Trans Antennas Propag., vol.60, no.4, pp.2096-2100, Apr. 2012. |
| [22] | Pal A., Mehta A., Mirshekar‐Syahkal D., Deo P., and Nakano H., “Dual-band low-profile capacitively coupled beam-steerable square-loop antenna,” IEEE Trans Antennas Propag., vol.62, no.3, pp.1204-1211, Mar. 2014. |
| [23] | Gupta S., and Mumcu G., “Dual-band miniature coupled double loop GPS antenna loaded with lumped capacitors and inductive pins,” IEEE Trans Antennas Propag., vol.61, no.6, pp.2904-2910, Jun. 2013. |
APA Style
Manato Fujimoto, Yukio Iida. (2015). Array Antennas Comprised of Tetragons for RFID Applications. International Journal of Wireless Communications and Mobile Computing, 3(2), 13-17. https://doi.org/10.11648/j.wcmc.20150302.11
ACS Style
Manato Fujimoto; Yukio Iida. Array Antennas Comprised of Tetragons for RFID Applications. Int. J. Wirel. Commun. Mobile Comput. 2015, 3(2), 13-17. doi: 10.11648/j.wcmc.20150302.11
AMA Style
Manato Fujimoto, Yukio Iida. Array Antennas Comprised of Tetragons for RFID Applications. Int J Wirel Commun Mobile Comput. 2015;3(2):13-17. doi: 10.11648/j.wcmc.20150302.11
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.wcmc.20150302.11,
author = {Manato Fujimoto and Yukio Iida},
title = {Array Antennas Comprised of Tetragons for RFID Applications},
journal = {International Journal of Wireless Communications and Mobile Computing},
volume = {3},
number = {2},
pages = {13-17},
doi = {10.11648/j.wcmc.20150302.11},
url = {https://doi.org/10.11648/j.wcmc.20150302.11},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.wcmc.20150302.11},
abstract = {The location estimation capability of a RFID (Radio Frequency Identification) technology is useful for indoor navigation systems on mobile robots. In this paper, we study a simple and small structural antenna at 2.5GHz band that can reduce the beam when installed on a mobile robot. An antenna with small occupation volume by a mechanical rotation is assumed. We used electromagnetic field simulation and experimental results to design a simple structural antenna. Our design culminates in two antennas comprised of Tetragon elements formed with wires. One is called Tetra-4, and is an antenna which has a lateral arrangement of four tetragons. Because the input impedance is considerably high, Tetra-4 is suitable for use in the high impedance system. When driving in 100 Ωbalanced system, the gain of Tetra-4 is 8dBi. The half-power band width (HPBW) in the H-plane is 38 degrees, and is 0.44 times that of a dipole with a reflector. Another one is Yagi-Uda antenna comprised of two tetragon elements. When driving in 50 Ωbalanced system, the gain is 11dBi. The HPBW is 40 degrees in the H-plane and is 36 degrees in the E-plane.},
year = {2015}
}
TY - JOUR T1 - Array Antennas Comprised of Tetragons for RFID Applications AU - Manato Fujimoto AU - Yukio Iida Y1 - 2015/02/25 PY - 2015 N1 - https://doi.org/10.11648/j.wcmc.20150302.11 DO - 10.11648/j.wcmc.20150302.11 T2 - International Journal of Wireless Communications and Mobile Computing JF - International Journal of Wireless Communications and Mobile Computing JO - International Journal of Wireless Communications and Mobile Computing SP - 13 EP - 17 PB - Science Publishing Group SN - 2330-1015 UR - https://doi.org/10.11648/j.wcmc.20150302.11 AB - The location estimation capability of a RFID (Radio Frequency Identification) technology is useful for indoor navigation systems on mobile robots. In this paper, we study a simple and small structural antenna at 2.5GHz band that can reduce the beam when installed on a mobile robot. An antenna with small occupation volume by a mechanical rotation is assumed. We used electromagnetic field simulation and experimental results to design a simple structural antenna. Our design culminates in two antennas comprised of Tetragon elements formed with wires. One is called Tetra-4, and is an antenna which has a lateral arrangement of four tetragons. Because the input impedance is considerably high, Tetra-4 is suitable for use in the high impedance system. When driving in 100 Ωbalanced system, the gain of Tetra-4 is 8dBi. The half-power band width (HPBW) in the H-plane is 38 degrees, and is 0.44 times that of a dipole with a reflector. Another one is Yagi-Uda antenna comprised of two tetragon elements. When driving in 50 Ωbalanced system, the gain is 11dBi. The HPBW is 40 degrees in the H-plane and is 36 degrees in the E-plane. VL - 3 IS - 2 ER -
Information
Email: