Please enter verification code
A Study of Measurement for Dangerous Prediction on Static Lording Test Using Piezoelectric Limit Sensors
American Journal of Remote Sensing
Volume 3, Issue 3, June 2015, Pages: 43-48
Received: Jun. 4, 2015; Accepted: Jun. 16, 2015; Published: Jul. 4, 2015
Views 4825      Downloads 104
Nobuhiro Shimoi, Department of Machine Intelligence and Systems Engineering, Akita Prefectural University, Yurihonjo, Japan
Carlos Cuadr, Department of Architecture and Environment Systems, Akita Prefectural University, Yurihonjo, Japan
Article Tools
Follow on us
Applicability of a new piezoelectric limit sensor to detect premonitory failure during static loading testing is discussed in this paper. Brick masonry specimens were subjected to compression tests to evaluate their mechanical properties and to investigate proposed sensor response. These new sensors consist of a glass pipe containing piezoelectric film elements for the measurement of signals during static loading tests. The glass pipe can be installed directly in brick masonry specimens or inserted into the holder. For this research, a brass tube holder was made. This report discusses examinations for glass pipe alone and glass pipe with brass holder.
Smart Sensor, Health Monitoring, Piezoelectric Sensor
To cite this article
Nobuhiro Shimoi, Carlos Cuadr, A Study of Measurement for Dangerous Prediction on Static Lording Test Using Piezoelectric Limit Sensors, American Journal of Remote Sensing. Vol. 3, No. 3, 2015, pp. 43-48. doi: 10.11648/j.ajrs.20150303.12
N. Shimoi, C. H. Cuadra, H. Madokoro and M. Saijo, Vibration Analysis of Wooden Traditional Frames Using Finite Element Method and Measurements with a Simple Piezoelectric Cable Displacement Sensor, Transactions of Japan Society of Mechanical Engineering, Ser. C, Vol. 79, No. 806, pp. 3442-3452, 2013
N. Shimoi, M. Saijo,C. H. Cuadra, and H. Madokoro, A Study of Measurement for Dangerous Prediction on Static Lording Test Using Piezoelectric Limit Sensors, International Journal of Instrumentation Science.Vol.4,No1.pp1-9 ,2015
T. Maruyama, The outline of the active fault of the epicentral area of 2008 China Sichuan big earthquake, AFRC NEWS, No. 79, pp. 1-3, 2008
S. Watanabe and M. Samizo, The health monitoring system of bridge pier foundation by measuring slight oscillating movement on a steady basis, Railway Technical Research Institute Report, Vol. 25, No. 7, pp. 25-30, 2011
Structure committee of civil engineering : Subcommittee for design technique of FRP bridge, Report of subcommittee for design technique of FRP bridge, University of Tokyo Press, 2004
K. Ono, A research on life- prolonging technology of established structures, The second new urban socio-technical seminar, Research report 3, Study group to create new urban by fused socio-technology, pp. 11-23, 2004
Building Research Institute, An independent administrative agency, National Institute for Land and Infrastructure Management, Ministry of Land, Infrastructure, Transport and Tourism, About the investigation report on building damage and revival situation after 2008 China Sichuan big earthquake, 2008
Tokyo Sensor, Piezoelectric cable, Piezo Film Technical Manual, Vol. R1, pp.17-18, 2001
Liu Ke and S. Shioya, Research on strength testing method of wall of existing brick structures, Collected papers of annual convention of Japan Concrete Institute, Vol. 25, No. 2, pp.1927-1932, 2003
Design of machine elements, Akira Yoshida, Writing and editing, Japanese science and engineering publishing company,pp11-13(2012)
Science Publishing Group
1 Rockefeller Plaza,
10th and 11th Floors,
New York, NY 10020
Tel: (001)347-983-5186