Forced Convection Heat Transfer Analysis through Dimpled Surfaces with Different Arrangements

Hasibur Rahman Sardar; Abdul Razak Kaladgi

doi:doi:10.11648/j.ajee.20150303.12

| Peer-Reviewed

Forced Convection Heat Transfer Analysis through Dimpled Surfaces with Different Arrangements

Hasibur Rahman Sardar, Abdul Razak Kaladgi

Published in American Journal of Energy Engineering (Volume 3, Issue 3)

Received: 20 April 2015 Accepted: 25 April 2015 Published: 11 May 2015

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Dimples play a very important role in heat transfer enhancement of electronic cooling systems, heat exchangers etc. This work mainly deals with the experimental investigation of forced convection heat transfer over circular shaped dimples of different diameters on a flat copper plate under external laminar flow conditions. Experimental measurements on heat transfer characteristics of air (with various inlet flow rates) on a flat plate with dimples were conducted. From the obtained results, it was observed that the heat transfer coefficient and Nusselt number were high for the copper plate in which the diameter of dimples increases centrally in the direction of flow (case c) as compared to the other two cases.

Published in	American Journal of Energy Engineering (Volume 3, Issue 3)
DOI	10.11648/j.ajee.20150303.12
Page(s)	37-45
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Forced Convection, Dimples, Heat Transfer, Passive Techniques

References

[1]	Dewan, A., Mahanta, P., Raju,K.S., and Kumar.P.S.,Review of passive heat transfer augmentation techniques. Proc. Instn Mech. Engrs, Part A: J. Power and Energy, Vol. 218, pp. 509–527, 2004.
[2]	Liu ,S, and Sakr ,M.A., comprehensive review on passive heat transfer enhancements in pipe exchangers. Renewable and Sustainable Energy Reviews, Vol.19 pp. 64–81, 2013.
[3]	Zhang, D., Zheng, L., Xie, G., and Xie, Y.,An Experimental Study on Heat Transfer enhancement of Non-Newtonian Fluid in a Rectangular Channel with Dimples/Protrusions, Transactions of the ASME, Vol. 136, pp.021005-10, 2014.
[4]	Beves, C.C., Barber, T.J., and Leonardi,E., An Investigation of Flow over Two-Dimensional Circular Cavity. In 15th Australasian Fluid Mechanics Conference, the University of Sydney, Australia, pp.13-17, 2004.
[5]	Kuethe A. M., Boundary Layer Control of Flow Separation and Heat Exchange. US Patent No. 1191, 1970.
[6]	Afanasyev, V. N., Chudnovsky, Y. P., Leontiev, A. I., and Roganov, P.S., Turbulent flow friction and heat transfer characteristics for spherical cavities on a flat plate. Experimental Thermal Fluid Science, Vol. 7, Issue 1, pp. 1–8, 1993.
[7]	Chyu, M. K., Yu, Y., Ding, H., Downs, J. P., and Soechting, F.O., Concavity enhanced heat transfer in an internal cooling passage. In Orlando international Gs Turbine & Aero engine Congress & Exhibition, Proceedings of the 1997(ASME paper 97-GT-437), 1997.
[8]	Mahmood, G. I., Hill, M. L., Nelson, D. L., Ligrani, P. M., Moon, H.K., and Glezer, B., Local heat transfer and flow structure on and above a dimpled surface in a channel. J Turbomach, Vol.123, Issue 1, pp: 115–23, 2001.
[9]	Yonghui Xie, Huancheng Qu ,Di Zhang ,Numerical investigation of flow and heat transfer in rectangular channel with teardrop dimple/protrusion. International Journal of Heat and Mass Transfer ,Vol 84 pp.486–496,2015
[10]	Farhad sangtarash & hosseinshokuhmand ,Experimental and numerical investigation of the heat transfer augmentation and pressure drop in simple, dimpled and perforated dimpled louver fin banks with an in-line or staggered arrangement ,Applied Thermal Engineering Vol 82 ,pp194-205, 2015.
[11]	Gadhave, G., and Kumar. P., Enhancement of forced Convection Heat Transfer over Dimple Surface-Review. International Multidisciplinary e - Journal .Vol-1, Issue-2, pp.51-57, 2012
[12]	Katkhaw, N., Vorayos, N., Kiatsiriroat, T., Khunatorn, Y., Bunturat, D., and Nuntaphan., A. Heat transfer behavior of flat plate having 450 ellipsoidal dimpled surfaces. Case Studies in Thermal Engineering, vol.2, pp. 67–74, 2014.
[13]	Patel,I.H ., and Borse ,S.H. Experimental investigation of heat transfer enhancement over the dimpled surface. International Journal of Engineering Science and Technology, Vol.4, Issue 6, pp.3666–3672, 2012.
[14]	Faheem Akhtar, Abdul Razak R Kaladgi and Mohammed Samee, Heat transfer augmentation using dimples in forced convection -an experimental approach. Int. J. Mech. Eng. & Rob. Res. Vol 4,Issue 1 ,pp 150-153,2015
[15]	Faheem Akhtar, Abdul Razak R Kaladgi and Mohammed Samee, Heat transfer enhancement using dimple surfaces under natural convection—an experimental study, Int. J. Mech. Eng. & Rob. Res. Vol 4,Issue 1 ,pp 173-175,2015

Cite This Article

Plain Text BibTeX RIS

APA Style

Hasibur Rahman Sardar, Abdul Razak Kaladgi. (2015). Forced Convection Heat Transfer Analysis through Dimpled Surfaces with Different Arrangements. American Journal of Energy Engineering, 3(3), 37-45. https://doi.org/10.11648/j.ajee.20150303.12

Copy | Download

ACS Style

Hasibur Rahman Sardar; Abdul Razak Kaladgi. Forced Convection Heat Transfer Analysis through Dimpled Surfaces with Different Arrangements. Am. J. Energy Eng. 2015, 3(3), 37-45. doi: 10.11648/j.ajee.20150303.12

Copy | Download

AMA Style

Hasibur Rahman Sardar, Abdul Razak Kaladgi. Forced Convection Heat Transfer Analysis through Dimpled Surfaces with Different Arrangements. Am J Energy Eng. 2015;3(3):37-45. doi: 10.11648/j.ajee.20150303.12

Copy | Download

@article{10.11648/j.ajee.20150303.12,
  author = {Hasibur Rahman Sardar and Abdul Razak Kaladgi},
  title = {Forced Convection Heat Transfer Analysis through Dimpled Surfaces with Different Arrangements},
  journal = {American Journal of Energy Engineering},
  volume = {3},
  number = {3},
  pages = {37-45},
  doi = {10.11648/j.ajee.20150303.12},
  url = {https://doi.org/10.11648/j.ajee.20150303.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajee.20150303.12},
  abstract = {Dimples play a very important role in heat transfer enhancement of electronic cooling systems, heat exchangers etc. This work mainly deals with the experimental investigation of forced convection heat transfer over circular shaped dimples of different diameters on a flat copper plate under external laminar flow conditions. Experimental measurements on heat transfer characteristics of air (with various inlet flow rates) on a flat plate with dimples were conducted. From the obtained results, it was observed that the heat transfer coefficient and Nusselt number were high for the copper plate in which the diameter of dimples increases centrally in the direction of flow (case c) as compared to the other two cases.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - Forced Convection Heat Transfer Analysis through Dimpled Surfaces with Different Arrangements
AU  - Hasibur Rahman Sardar
AU  - Abdul Razak Kaladgi
Y1  - 2015/05/11
PY  - 2015
N1  - https://doi.org/10.11648/j.ajee.20150303.12
DO  - 10.11648/j.ajee.20150303.12
T2  - American Journal of Energy Engineering
JF  - American Journal of Energy Engineering
JO  - American Journal of Energy Engineering
SP  - 37
EP  - 45
PB  - Science Publishing Group
SN  - 2329-163X
UR  - https://doi.org/10.11648/j.ajee.20150303.12
AB  - Dimples play a very important role in heat transfer enhancement of electronic cooling systems, heat exchangers etc. This work mainly deals with the experimental investigation of forced convection heat transfer over circular shaped dimples of different diameters on a flat copper plate under external laminar flow conditions. Experimental measurements on heat transfer characteristics of air (with various inlet flow rates) on a flat plate with dimples were conducted. From the obtained results, it was observed that the heat transfer coefficient and Nusselt number were high for the copper plate in which the diameter of dimples increases centrally in the direction of flow (case c) as compared to the other two cases.
VL  - 3
IS  - 3
ER  -

Copy | Download

Author Information

Hasibur Rahman Sardar

Department of Electronics & Communication Engineering, P.A College of Engineering, Karnataka, India
Abdul Razak Kaladgi

Department of Mechanical Engineering, P.A College of Engineering, Karnataka, India

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Hasibur Rahman Sardar, Abdul Razak Kaladgi. (2015). Forced Convection Heat Transfer Analysis through Dimpled Surfaces with Different Arrangements. American Journal of Energy Engineering, 3(3), 37-45. https://doi.org/10.11648/j.ajee.20150303.12

Copy | Download

ACS Style

Hasibur Rahman Sardar; Abdul Razak Kaladgi. Forced Convection Heat Transfer Analysis through Dimpled Surfaces with Different Arrangements. Am. J. Energy Eng. 2015, 3(3), 37-45. doi: 10.11648/j.ajee.20150303.12

Copy | Download

AMA Style

Hasibur Rahman Sardar, Abdul Razak Kaladgi. Forced Convection Heat Transfer Analysis through Dimpled Surfaces with Different Arrangements. Am J Energy Eng. 2015;3(3):37-45. doi: 10.11648/j.ajee.20150303.12

Copy | Download

@article{10.11648/j.ajee.20150303.12,
  author = {Hasibur Rahman Sardar and Abdul Razak Kaladgi},
  title = {Forced Convection Heat Transfer Analysis through Dimpled Surfaces with Different Arrangements},
  journal = {American Journal of Energy Engineering},
  volume = {3},
  number = {3},
  pages = {37-45},
  doi = {10.11648/j.ajee.20150303.12},
  url = {https://doi.org/10.11648/j.ajee.20150303.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajee.20150303.12},
  abstract = {Dimples play a very important role in heat transfer enhancement of electronic cooling systems, heat exchangers etc. This work mainly deals with the experimental investigation of forced convection heat transfer over circular shaped dimples of different diameters on a flat copper plate under external laminar flow conditions. Experimental measurements on heat transfer characteristics of air (with various inlet flow rates) on a flat plate with dimples were conducted. From the obtained results, it was observed that the heat transfer coefficient and Nusselt number were high for the copper plate in which the diameter of dimples increases centrally in the direction of flow (case c) as compared to the other two cases.},
 year = {2015}
}

Copy | Download

TY  - JOUR
T1  - Forced Convection Heat Transfer Analysis through Dimpled Surfaces with Different Arrangements
AU  - Hasibur Rahman Sardar
AU  - Abdul Razak Kaladgi
Y1  - 2015/05/11
PY  - 2015
N1  - https://doi.org/10.11648/j.ajee.20150303.12
DO  - 10.11648/j.ajee.20150303.12
T2  - American Journal of Energy Engineering
JF  - American Journal of Energy Engineering
JO  - American Journal of Energy Engineering
SP  - 37
EP  - 45
PB  - Science Publishing Group
SN  - 2329-163X
UR  - https://doi.org/10.11648/j.ajee.20150303.12
AB  - Dimples play a very important role in heat transfer enhancement of electronic cooling systems, heat exchangers etc. This work mainly deals with the experimental investigation of forced convection heat transfer over circular shaped dimples of different diameters on a flat copper plate under external laminar flow conditions. Experimental measurements on heat transfer characteristics of air (with various inlet flow rates) on a flat plate with dimples were conducted. From the obtained results, it was observed that the heat transfer coefficient and Nusselt number were high for the copper plate in which the diameter of dimples increases centrally in the direction of flow (case c) as compared to the other two cases.
VL  - 3
IS  - 3
ER  -

Copy | Download