Comparative Evaluation of Biodiesel Produced by the Improved Biodiesel Plant with a Centrifuge for Ester-Glycerol Separation and a Single Washing and Drying Unit

Nwogu Chukwunonso

doi:doi:10.11648/j.ijrse.20160501.12

| Peer-Reviewed

Comparative Evaluation of Biodiesel Produced by the Improved Biodiesel Plant with a Centrifuge for Ester-Glycerol Separation and a Single Washing and Drying Unit

Nwogu Chukwunonso

Published in International Journal of Sustainable and Green Energy (Volume 5, Issue 1)

Received: 2 February 2016 Accepted: 17 February 2016 Published: 1 March 2016

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

This paper assessed the quality of biodiesel produced by the improved biodiesel plant. This was achieved by determining some physical properties of the biodiesel produced. The properties tested include: kinematic viscosity, specific gravity, flash point, fire point, cloud point and pour point, with their respective values determined as 5.260, 0.880, 124°C, 128°C, 4.5°C and -2°C. Comparison with ASTM D-6751, EN 14214 and Australian standards for biodiesel showed that the values obtained fall within acceptable limits. Furthermore, B5, B10, B20 and B30 blends of the biodiesel were prepared using direct blending method. The physical properties of the respective blends were also determined and the results showed that blending the biodiesel with petroleum based diesel improved its quality.

Published in	International Journal of Sustainable and Green Energy (Volume 5, Issue 1)
DOI	10.11648/j.ijrse.20160501.12
Page(s)	8-12
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Improved Biodiesel Plant, Physical Properties, Blends

References

[1]	Alamu O. J., Waheed M. A. and Jekayinfa S. O. “Alkali-catalysed Laboratory Production and Testing of Biodiesel Fuel from Nigerian Palm Kernel Oil”. Agricultural Engineering International, 2007, 9: 1-11.
[2]	Aransiola E. F., Daramola M. O. and Ojumu T V. “Nigeria Jatrophacurcasoil seeds: prospects for biodiesel production in Nigeria”. International Journal of Renewable Energy Research. 2(2), 2012, 317–325.
[3]	Akoh C. C., Chang S., Lee G. and Shaw J. “Enzymatic approach to biodiesel production”. J. Agric. Food Chem. 55, 2007, 8995 – 9005.
[4]	Berchmans H. J. and Hirata S. Biodiesel production from crude Jatrophacurcas L. seed oil with a high content of free fatty acids. Bioresource Technology, 2008.
[5]	Robles-Medina A., Gonzalez-Moreno P. A., Esteban –Cerdán L and Molina-Grima E. “Biocatalysis: Towards evergreener biodiesel production”. Biotechnol. Adv. 27, 2009, 398-408.
[6]	Hasibuan S., Ma’ruf A. and Sahirman. Biodiesel from low grade used frying oil using esterification transesterification process. MakaraSains 13(2), 2009, 105-110.
[7]	Knothe, G. “Analyzing biodiesel: Standards and other methods”. Journal of American Oil Chemists Society, 83(10), 2006, 823-833.
[8]	Kemp, W. H. Biodiesel: Basics and beyond: A comprehensive guide to production and use for the home and farm. Tamworth, Ont.: Aztext Press, 2006.
[9]	Nwogu Chukwunonso. “Design and Development of an Industrial Centrifuge for Small and Medium Scaled Industries”, Innovative Systems Design and Engineering, ISSN 2222-1727 Vol. 6, No. 10, 2015, 1-9.
[10]	Nwogu C. N. and Obi A. I. “Development of an Improved Biodiesel Plant”, International Journal of Science and Research (IJSR) ISSN (Online), 2015, 2319-7064.
[11]	Okoro L., Sedoo V. Belaboh, Nwakama R. Edoye and Bella Y. Makama. “Synthesis, Calorific and Viscometric Study of Groundnut Oil Biodiesel and Blends”, Research Journal of Chemical Sciences ISSN 2231-606, 2011.
[12]	Emil A., Z. Yaakob, S. K. Kamarudin, M. Ismail and J. Salimon. “Characteristics and composition of jatropha curcas oil seed from Malaysia and its potential as biodiesel feedstock”. Eur. J. Sci. Res, 29, 2009, 396-403.
[13]	Samuel O. D., Waheed M. A., Bolaji B. O. and Dario O. U. “Production of Biodiesel from Nigerian Restaurant Waste cooking oil using Blender”, International Journal of Renewable Energy Research Vol. 3, No. 4, 2013.

Cite This Article

Plain Text BibTeX RIS

APA Style

Nwogu Chukwunonso. (2016). Comparative Evaluation of Biodiesel Produced by the Improved Biodiesel Plant with a Centrifuge for Ester-Glycerol Separation and a Single Washing and Drying Unit. International Journal of Sustainable and Green Energy, 5(1), 8-12. https://doi.org/10.11648/j.ijrse.20160501.12

Copy | Download

ACS Style

Nwogu Chukwunonso. Comparative Evaluation of Biodiesel Produced by the Improved Biodiesel Plant with a Centrifuge for Ester-Glycerol Separation and a Single Washing and Drying Unit. Int. J. Sustain. Green Energy 2016, 5(1), 8-12. doi: 10.11648/j.ijrse.20160501.12

Copy | Download

AMA Style

Nwogu Chukwunonso. Comparative Evaluation of Biodiesel Produced by the Improved Biodiesel Plant with a Centrifuge for Ester-Glycerol Separation and a Single Washing and Drying Unit. Int J Sustain Green Energy. 2016;5(1):8-12. doi: 10.11648/j.ijrse.20160501.12

Copy | Download

@article{10.11648/j.ijrse.20160501.12,
  author = {Nwogu Chukwunonso},
  title = {Comparative Evaluation of Biodiesel Produced by the Improved Biodiesel Plant with a Centrifuge for Ester-Glycerol Separation and a Single Washing and Drying Unit},
  journal = {International Journal of Sustainable and Green Energy},
  volume = {5},
  number = {1},
  pages = {8-12},
  doi = {10.11648/j.ijrse.20160501.12},
  url = {https://doi.org/10.11648/j.ijrse.20160501.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijrse.20160501.12},
  abstract = {This paper assessed the quality of biodiesel produced by the improved biodiesel plant. This was achieved by determining some physical properties of the biodiesel produced. The properties tested include: kinematic viscosity, specific gravity, flash point, fire point, cloud point and pour point, with their respective values determined as 5.260, 0.880, 124°C, 128°C, 4.5°C and -2°C. Comparison with ASTM D-6751, EN 14214 and Australian standards for biodiesel showed that the values obtained fall within acceptable limits. Furthermore, B5, B10, B20 and B30 blends of the biodiesel were prepared using direct blending method. The physical properties of the respective blends were also determined and the results showed that blending the biodiesel with petroleum based diesel improved its quality.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Comparative Evaluation of Biodiesel Produced by the Improved Biodiesel Plant with a Centrifuge for Ester-Glycerol Separation and a Single Washing and Drying Unit
AU  - Nwogu Chukwunonso
Y1  - 2016/03/01
PY  - 2016
N1  - https://doi.org/10.11648/j.ijrse.20160501.12
DO  - 10.11648/j.ijrse.20160501.12
T2  - International Journal of Sustainable and Green Energy
JF  - International Journal of Sustainable and Green Energy
JO  - International Journal of Sustainable and Green Energy
SP  - 8
EP  - 12
PB  - Science Publishing Group
SN  - 2575-1549
UR  - https://doi.org/10.11648/j.ijrse.20160501.12
AB  - This paper assessed the quality of biodiesel produced by the improved biodiesel plant. This was achieved by determining some physical properties of the biodiesel produced. The properties tested include: kinematic viscosity, specific gravity, flash point, fire point, cloud point and pour point, with their respective values determined as 5.260, 0.880, 124°C, 128°C, 4.5°C and -2°C. Comparison with ASTM D-6751, EN 14214 and Australian standards for biodiesel showed that the values obtained fall within acceptable limits. Furthermore, B5, B10, B20 and B30 blends of the biodiesel were prepared using direct blending method. The physical properties of the respective blends were also determined and the results showed that blending the biodiesel with petroleum based diesel improved its quality.
VL  - 5
IS  - 1
ER  -

Copy | Download

Author Information

Nwogu Chukwunonso

Department of Mechanical Engineering, Michael Okpara University of Agriculture Umudike, Umuahia, Nigeria

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Nwogu Chukwunonso. (2016). Comparative Evaluation of Biodiesel Produced by the Improved Biodiesel Plant with a Centrifuge for Ester-Glycerol Separation and a Single Washing and Drying Unit. International Journal of Sustainable and Green Energy, 5(1), 8-12. https://doi.org/10.11648/j.ijrse.20160501.12

Copy | Download

ACS Style

Nwogu Chukwunonso. Comparative Evaluation of Biodiesel Produced by the Improved Biodiesel Plant with a Centrifuge for Ester-Glycerol Separation and a Single Washing and Drying Unit. Int. J. Sustain. Green Energy 2016, 5(1), 8-12. doi: 10.11648/j.ijrse.20160501.12

Copy | Download

AMA Style

Nwogu Chukwunonso. Comparative Evaluation of Biodiesel Produced by the Improved Biodiesel Plant with a Centrifuge for Ester-Glycerol Separation and a Single Washing and Drying Unit. Int J Sustain Green Energy. 2016;5(1):8-12. doi: 10.11648/j.ijrse.20160501.12

Copy | Download

@article{10.11648/j.ijrse.20160501.12,
  author = {Nwogu Chukwunonso},
  title = {Comparative Evaluation of Biodiesel Produced by the Improved Biodiesel Plant with a Centrifuge for Ester-Glycerol Separation and a Single Washing and Drying Unit},
  journal = {International Journal of Sustainable and Green Energy},
  volume = {5},
  number = {1},
  pages = {8-12},
  doi = {10.11648/j.ijrse.20160501.12},
  url = {https://doi.org/10.11648/j.ijrse.20160501.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijrse.20160501.12},
  abstract = {This paper assessed the quality of biodiesel produced by the improved biodiesel plant. This was achieved by determining some physical properties of the biodiesel produced. The properties tested include: kinematic viscosity, specific gravity, flash point, fire point, cloud point and pour point, with their respective values determined as 5.260, 0.880, 124°C, 128°C, 4.5°C and -2°C. Comparison with ASTM D-6751, EN 14214 and Australian standards for biodiesel showed that the values obtained fall within acceptable limits. Furthermore, B5, B10, B20 and B30 blends of the biodiesel were prepared using direct blending method. The physical properties of the respective blends were also determined and the results showed that blending the biodiesel with petroleum based diesel improved its quality.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Comparative Evaluation of Biodiesel Produced by the Improved Biodiesel Plant with a Centrifuge for Ester-Glycerol Separation and a Single Washing and Drying Unit
AU  - Nwogu Chukwunonso
Y1  - 2016/03/01
PY  - 2016
N1  - https://doi.org/10.11648/j.ijrse.20160501.12
DO  - 10.11648/j.ijrse.20160501.12
T2  - International Journal of Sustainable and Green Energy
JF  - International Journal of Sustainable and Green Energy
JO  - International Journal of Sustainable and Green Energy
SP  - 8
EP  - 12
PB  - Science Publishing Group
SN  - 2575-1549
UR  - https://doi.org/10.11648/j.ijrse.20160501.12
AB  - This paper assessed the quality of biodiesel produced by the improved biodiesel plant. This was achieved by determining some physical properties of the biodiesel produced. The properties tested include: kinematic viscosity, specific gravity, flash point, fire point, cloud point and pour point, with their respective values determined as 5.260, 0.880, 124°C, 128°C, 4.5°C and -2°C. Comparison with ASTM D-6751, EN 14214 and Australian standards for biodiesel showed that the values obtained fall within acceptable limits. Furthermore, B5, B10, B20 and B30 blends of the biodiesel were prepared using direct blending method. The physical properties of the respective blends were also determined and the results showed that blending the biodiesel with petroleum based diesel improved its quality.
VL  - 5
IS  - 1
ER  -

Copy | Download