The corrugated plate heat exchangers are widely used in food industry especially for pasteurization operations. Limited research work has been carried out on sinusoidal plate heat exchangers. In the present investigation, experimental studies have been carried out in a sinusoidal corrugated plate heat exchanger with water and glycerol solutions of varying concentration as test fluids. The plate heat exchanger is fabricated with two stainless steel sheets having a thickness of 1 mm forming a test channel having a clearance of 5 mm and of length 30cm. 3 such plate heat exchangers have been fabricated with corrugation angles of 30, 40 and 50 degrees. The effect of corrugation angle has been analyzed in detail and it has been observed from the experimental results that the corrugation angle is the major parameter that affects the pressure drop and the friction factor.
| Published in | International Journal of Mechanical Engineering and Applications (Volume 2, Issue 3) |
| DOI | 10.11648/j.ijmea.20140203.11 |
| Page(s) | 38-42 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Corrugated Plate Heat Exchanger, Corrugation Angle, Pressure Drop, Newtonian Fluids and Friction Factor
| [1] | Mckillop AA, Dunkley WL. Plate heat exchangers–heat transfer. Ind Eng Chem1960;52(9):740–4. |
| [2] | V.K. Nema, Shive Dayal Pandey,(2011), Experimental investigation of heat transfer and friction factor in a corrugated plate heat exchanger, International Journal OfEnergy And Environment, 2(2):287-296. |
| [3] | Bassiouny MK. Flow distribution and pressure-drop in plate heat-exchangers. U-type arrangement. Chem Eng Sci 1984;39:693. |
| [4] | Iulian Gherasim, Matthew Taws, Nicolas Galanis, Cong Tam Nguyen (2011), Heat transfer and fluid flow in a plate heat exchanger part-1: Experimental investigation, International Journal of Thermal Sciences 50:1492-1498. |
| [5] | Heggs, P.J., Sandham, P., Hallam, R.A., Walton, C.,( 1997), Local transfer coefficients in corrugated plate heat exchangers channels, Trans IChemE, Part A, Chem Eng Res Des, 75(A7): 641–645. |
| [6] | Lioumbas, I.S., Mouza, A.A. and Paras, S.V.,( 2002), Local velocities inside the gas phase in counter current two-phase flow in a narrow vertical channel, Trans IChemE, Part A, Chem Eng Res Des, 80(6):667–673. |
| [7] | Goldstein. L. Jr.,Sparrow E.M. Heat mass transfercharacteristics for flow in corrugated channel: Trans: ASME Heat transfer,(1977), 99,187-195. |
| [8] | Lin. J.H., Huang. C.Y., C.C. Su, Dimensional Analysis For The Heat Transfer Characteristics In The Corrugated Channels of Plate Heat Exchangers: International Communications in Heat and Mass Transfer, (2007), Vol. 34, pp 304–312. |
| [9] | Athanasios g kanaris, A.A Mouza and S V Paras, Flow and heat transfer in a corrugated plate heat exchanger using a CFD code,(2006), chemical engineering technology,29,pp923-930. |
| [10] | Abdulbasit G. A. Abdulsayid,(2012), Modeling of Fluid Flow in 2D Triangular, Sinusoidal, and Square Corrugated Channels, World Academy of Science, Engineering and Technology,71,34-52. |
APA Style
B. Sreedhara Rao, S. Varun, MVS Murali Krishna, R. C. Sastry. (2014). Pressure Drop Studies of Newtonian Fluids in Corrugated Plate Heat Exchangers. International Journal of Mechanical Engineering and Applications, 2(3), 38-42. https://doi.org/10.11648/j.ijmea.20140203.11
ACS Style
B. Sreedhara Rao; S. Varun; MVS Murali Krishna; R. C. Sastry. Pressure Drop Studies of Newtonian Fluids in Corrugated Plate Heat Exchangers. Int. J. Mech. Eng. Appl. 2014, 2(3), 38-42. doi: 10.11648/j.ijmea.20140203.11
AMA Style
B. Sreedhara Rao, S. Varun, MVS Murali Krishna, R. C. Sastry. Pressure Drop Studies of Newtonian Fluids in Corrugated Plate Heat Exchangers. Int J Mech Eng Appl. 2014;2(3):38-42. doi: 10.11648/j.ijmea.20140203.11
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ijmea.20140203.11,
author = {B. Sreedhara Rao and S. Varun and MVS Murali Krishna and R. C. Sastry},
title = {Pressure Drop Studies of Newtonian Fluids in Corrugated Plate Heat Exchangers},
journal = {International Journal of Mechanical Engineering and Applications},
volume = {2},
number = {3},
pages = {38-42},
doi = {10.11648/j.ijmea.20140203.11},
url = {https://doi.org/10.11648/j.ijmea.20140203.11},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmea.20140203.11},
abstract = {The corrugated plate heat exchangers are widely used in food industry especially for pasteurization operations. Limited research work has been carried out on sinusoidal plate heat exchangers. In the present investigation, experimental studies have been carried out in a sinusoidal corrugated plate heat exchanger with water and glycerol solutions of varying concentration as test fluids. The plate heat exchanger is fabricated with two stainless steel sheets having a thickness of 1 mm forming a test channel having a clearance of 5 mm and of length 30cm. 3 such plate heat exchangers have been fabricated with corrugation angles of 30, 40 and 50 degrees. The effect of corrugation angle has been analyzed in detail and it has been observed from the experimental results that the corrugation angle is the major parameter that affects the pressure drop and the friction factor.},
year = {2014}
}
TY - JOUR T1 - Pressure Drop Studies of Newtonian Fluids in Corrugated Plate Heat Exchangers AU - B. Sreedhara Rao AU - S. Varun AU - MVS Murali Krishna AU - R. C. Sastry Y1 - 2014/05/30 PY - 2014 N1 - https://doi.org/10.11648/j.ijmea.20140203.11 DO - 10.11648/j.ijmea.20140203.11 T2 - International Journal of Mechanical Engineering and Applications JF - International Journal of Mechanical Engineering and Applications JO - International Journal of Mechanical Engineering and Applications SP - 38 EP - 42 PB - Science Publishing Group SN - 2330-0248 UR - https://doi.org/10.11648/j.ijmea.20140203.11 AB - The corrugated plate heat exchangers are widely used in food industry especially for pasteurization operations. Limited research work has been carried out on sinusoidal plate heat exchangers. In the present investigation, experimental studies have been carried out in a sinusoidal corrugated plate heat exchanger with water and glycerol solutions of varying concentration as test fluids. The plate heat exchanger is fabricated with two stainless steel sheets having a thickness of 1 mm forming a test channel having a clearance of 5 mm and of length 30cm. 3 such plate heat exchangers have been fabricated with corrugation angles of 30, 40 and 50 degrees. The effect of corrugation angle has been analyzed in detail and it has been observed from the experimental results that the corrugation angle is the major parameter that affects the pressure drop and the friction factor. VL - 2 IS - 3 ER -
Information
Email: