International Journal of Mechanical Engineering and Applications

| Peer-Reviewed |

Design of Aeroelasticity Bench test for NACA0012 Wing Model in the Low Speed Wind Tunnel: Influence of Wing’s Parameters on Flutter Speed

Received: 09 December 2014    Accepted: 26 December 2014    Published: 21 January 2015
Views:       Downloads:

Share This Article

Abstract

The purpose of this study is to calculate the geometries parameters for a wing NACA0012 as well as its materials in order to observe the instability of aeroelasticity such as divergence and flutter phenomenon in the low speed wind tunnel (38 m/s). Approaches used are the theories of aeroelasticity for the static and dynamic instability problem of the wing. The 3D divergence problem is solved first by strip theory to preliminary design the non-tapper wing and the suitable material for static instability at low speed. The V – g method for flutter analysis is carried out to verify the dynamic instability speed designed. A wing with wing chord, wing length is obtained in accordance with the testing section of the considered wind tunnel, and the suitable material is PU. The preliminary design were carried out for the the divergence phenomenon and divergence speeds can be observed at 30.34 m/s [10]. This study continues with the results based on dimensionless analysis of wing’s parameters on flutter speed.

DOI 10.11648/j.ijmea.s.2015030103.16
Published in International Journal of Mechanical Engineering and Applications (Volume 3, Issue 1-3, February 2015)

This article belongs to the Special Issue Transportation Engineering Technology

Page(s) 35-40
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Aeroelasticity, Bench Test for NACA0012, Flutter velocity, V – G Method

References
[1] Guertin, Master thesis “The Applycation of Finite Element Method to Aeroelastic Lifting Surface Flutter” Rice University, April 2012
[2] Theodorsen T., “General Theory of Aerodynamic Instability and the Mechanism of Flutter”, NACA Report 496, 1935.
[3] Theodorsen T., Garrick, I. E., “Mechanism of Flutter A Theoretical and Experimental Investigation of the Flutter Problem”, NACA Report 685, 1940.
[4] Ashley H., Zartarian G., “Piston Theory – A New Aerodynamic Tool for the Aeroelastician”, Twenty-Fourth Annual Meeting, IAS, New York, January 23-26, 1956.
[5] Yates E. C., “Modified-Strip-Analysis Method for Predicting Wing Flutter at Subsonic to Hypersonic Speeds”, Journal of Aircraft Vol. 3, No. 1, 1966.
[6] Steven L. Brunton., “Empirical State-Space Representations for Theodorsen’s Lift Model”, Princeton University, Princeton, April 17, 2012.
[7] R. A. Frazer, W. J. Duncan, and A. R. Collar, “Elementary matrices and some applications to dynamics and differential equations”. Cambridge [Eng.] The University press, 1938.
[8] E. H. Dowell, R. Clark, D. Cox, H. C. Curtiss, J. W. Edwards, K. C. Hall, D. A. Peters, R. H. Scanlan, E. Simiu, F. Sisto, and T. W. Strganac, “A modern course in Aeroelasticity”. Springer, 2004.
[9] Smilg, В., and L. S. Wasserman, “Application of Three-Dimensional Flutter Theory to Aircraft Structures”, U.S. Army Air Force Tech. Rept. 4798, 1942.
[10] T. A. Nguyen, H. N. Vang, Viet Khai Nguyen, Thi Tuyet Nhung LE, Chi-Cong Nguyen, “Design of aeroelasticity bench test for NACA0012 wing model in the low speed wind tunnel”, Journal for Research and Technology of HCM City University of Transport 7+8-9/2013, 163-169, 2013.
[11] T. Theodorsen and I. E. Garrick, “Mechanism of flutter: a theoretical and experimental investigation of flutter problem”, NACA Report 685, 1938.
Author Information
  • Departement of Aerospace Engineering, Faculty of Transport Engineering, Ho Chi Minh City University of Technology, Ho Chi Minh city, Vietnam

  • Departement of Aerospace Engineering, Faculty of Transport Engineering, Ho Chi Minh City University of Technology, Ho Chi Minh city, Vietnam

  • Departement of Aerospace Engineering, Faculty of Transport Engineering, Ho Chi Minh City University of Technology, Ho Chi Minh city, Vietnam

Cite This Article
  • APA Style

    Thi Tuyet Nhung Le, Chi-Cong Nguyen, Hoang Nam Vang. (2015). Design of Aeroelasticity Bench test for NACA0012 Wing Model in the Low Speed Wind Tunnel: Influence of Wing’s Parameters on Flutter Speed. International Journal of Mechanical Engineering and Applications, 3(1-3), 35-40. https://doi.org/10.11648/j.ijmea.s.2015030103.16

    Copy | Download

    ACS Style

    Thi Tuyet Nhung Le; Chi-Cong Nguyen; Hoang Nam Vang. Design of Aeroelasticity Bench test for NACA0012 Wing Model in the Low Speed Wind Tunnel: Influence of Wing’s Parameters on Flutter Speed. Int. J. Mech. Eng. Appl. 2015, 3(1-3), 35-40. doi: 10.11648/j.ijmea.s.2015030103.16

    Copy | Download

    AMA Style

    Thi Tuyet Nhung Le, Chi-Cong Nguyen, Hoang Nam Vang. Design of Aeroelasticity Bench test for NACA0012 Wing Model in the Low Speed Wind Tunnel: Influence of Wing’s Parameters on Flutter Speed. Int J Mech Eng Appl. 2015;3(1-3):35-40. doi: 10.11648/j.ijmea.s.2015030103.16

    Copy | Download

  • @article{10.11648/j.ijmea.s.2015030103.16,
      author = {Thi Tuyet Nhung Le and Chi-Cong Nguyen and Hoang Nam Vang},
      title = {Design of Aeroelasticity Bench test for NACA0012 Wing Model in the Low Speed Wind Tunnel: Influence of Wing’s Parameters on Flutter Speed},
      journal = {International Journal of Mechanical Engineering and Applications},
      volume = {3},
      number = {1-3},
      pages = {35-40},
      doi = {10.11648/j.ijmea.s.2015030103.16},
      url = {https://doi.org/10.11648/j.ijmea.s.2015030103.16},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ijmea.s.2015030103.16},
      abstract = {The purpose of this study is to calculate the geometries parameters for a wing NACA0012 as well as its materials in order to observe the instability of aeroelasticity such as divergence and flutter phenomenon in the low speed wind tunnel (38 m/s). Approaches used are the theories of aeroelasticity for the static and dynamic instability problem of the wing. The 3D divergence problem is solved first by strip theory to preliminary design the non-tapper wing and the suitable material for static instability at low speed. The V – g method for flutter analysis is carried out to verify the dynamic instability speed designed. A wing with wing chord, wing length is obtained in accordance with the testing section of the considered wind tunnel, and the suitable material is PU. The preliminary design were carried out for the the divergence phenomenon and divergence speeds can be observed at 30.34 m/s [10]. This study continues with the results based on dimensionless analysis of wing’s parameters on flutter speed.},
     year = {2015}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Design of Aeroelasticity Bench test for NACA0012 Wing Model in the Low Speed Wind Tunnel: Influence of Wing’s Parameters on Flutter Speed
    AU  - Thi Tuyet Nhung Le
    AU  - Chi-Cong Nguyen
    AU  - Hoang Nam Vang
    Y1  - 2015/01/21
    PY  - 2015
    N1  - https://doi.org/10.11648/j.ijmea.s.2015030103.16
    DO  - 10.11648/j.ijmea.s.2015030103.16
    T2  - International Journal of Mechanical Engineering and Applications
    JF  - International Journal of Mechanical Engineering and Applications
    JO  - International Journal of Mechanical Engineering and Applications
    SP  - 35
    EP  - 40
    PB  - Science Publishing Group
    SN  - 2330-0248
    UR  - https://doi.org/10.11648/j.ijmea.s.2015030103.16
    AB  - The purpose of this study is to calculate the geometries parameters for a wing NACA0012 as well as its materials in order to observe the instability of aeroelasticity such as divergence and flutter phenomenon in the low speed wind tunnel (38 m/s). Approaches used are the theories of aeroelasticity for the static and dynamic instability problem of the wing. The 3D divergence problem is solved first by strip theory to preliminary design the non-tapper wing and the suitable material for static instability at low speed. The V – g method for flutter analysis is carried out to verify the dynamic instability speed designed. A wing with wing chord, wing length is obtained in accordance with the testing section of the considered wind tunnel, and the suitable material is PU. The preliminary design were carried out for the the divergence phenomenon and divergence speeds can be observed at 30.34 m/s [10]. This study continues with the results based on dimensionless analysis of wing’s parameters on flutter speed.
    VL  - 3
    IS  - 1-3
    ER  - 

    Copy | Download

  • Sections