American Journal of Civil Engineering
Volume 4, Issue 6, November 2016, Pages: 345-350
Received: Dec. 2, 2016;
Published: Dec. 5, 2016
Views 3072 Downloads 90
Di Yun, Department of Civil Engineering, Jilin Jianzhu University, Changchun, China; Jilin Structure and Earthquake Resistance Technology Innovation Center, Changchun, China
Hao-wen Zheng, Department of Civil Engineering, Jilin Jianzhu University, Changchun, China; Jilin Structure and Earthquake Resistance Technology Innovation Center, Changchun, China
Ya-li Qi, Department of Civil Engineering, Jilin Jianzhu University, Changchun, China; Department of Civil Engineering, Jilin Vocational Technical Engineering School, Siping, China
Influences of cavity on in-plane stability behavior of parabolic CFST arch ribs are analyzed with ANSYS. Considering different cavity ratio, steel ratio and rise-to-span ratio, material and geometric nonlinearities analysis of parabolic CFST arch-ribs under different in-plane load cases are conducted. It is concluded that the bigger the cavity ratio is, the lower stiffness and bearing capacity of arch-ribs will be. With the same cavity ratio, including section cavity ratio and rib cavity ratio, there is more significant influence with the smaller steel ratio and the more uniform distribution of vertical loads. Moreover, there is little influence of common rise-to-span ratio on stability reduction due to the existence of cavity.
Nonlinear In-Plane Stability of Parabolic CFST Arch-Ribs with Cavity, American Journal of Civil Engineering.
Vol. 4, No. 6,
2016, pp. 345-350.
C. J. Lin, J. L. Zheng, and R. Qin, “Research review on incompletion filling of CFST members,” China: Journal of China and Foreign Highway. vol. 24 (6), 2004, pp. 54–58.
K. F. Liang, “Influence of separation on mechanic behavior of CFST members,” Changsha: Hunan University, 2008,pp. 1-12.
J. K. Xin, “Classification and reasons of separation of CFST arch ribs,” China: China Science and Technology Information. vol. 23 (12) 2009, pp. 81–82.
J. C. Su, “Survey on CFST arch bridges and research on their void problem,” Chengdu: Southwest Jiaotong University, 2012, pp: 1-23, 76-85.
S. Wang, “Effect of separation on the static and dynamic performance of concrete-filled steel tube arch bridge,” Xi’an: Chang’an University, 2012, pp: 1-10, 34-44.
H. W. Zheng, D. Yun, “Calculation methods for the in-plane stability of concrete filled steel tubular arch ribs,” China: Steel Construction. vol. 31(10) 2016, pp: 71-75.
B. C. Chen, Y. J. Chen, “Experimental research on the whole process of CFST arch rib under in-plane load case,” China: Engineering Mechanics. vol. 17 (2) 2000, pp. 44-50.
D. Yun, H. W. Zheng and H. Zhou, “Influence of filling-incompletion on in-plane bearing capacity of single concrete filled steel tubular arch ribs,” China: Journal of Building Structures. vol. 36 (sup.1) 2015, pp: 120-125.
China Association for Engineering Construction Standardization, “Code for design of steel structures, GB50017-2003,” Beijing: China Building Industry Press, 2003.
Housing and Urban-rural Development of the People’s Republic of China, “Code for design of concrete structures, GB50010-2010,” Beijing: China Building Industry Press, 2010.
Z. Q. Zou, S. Q. Song, “Application of multiaxial strength and constitutive relation of concrete,” Shanxi: Shanxi Structures. vol. 152 (2), 2008, pp. 13-17.
B. C. Chen, F. ZH. Liu, J. G. Wei, “Statistic and analysis of 327 CFST arch bridges,” China: Journal of China and Foreign Highway. vol. 31(3), 2011, pp. 96–103.
H. F. Xiang, G. D. Liu, “Stability and vibration of arch structures,” Beijing: China Communications Press. 1991, pp. 129-157.