Design and Construction of a Mobile Phone Based Home and Office Appliances Remote Switching System
American Journal of Embedded Systems and Applications
Volume 5, Issue 1, January 2017, Pages: 1-6
Received: Sep. 30, 2016;
Accepted: Oct. 11, 2016;
Published: Feb. 6, 2017
Views 7611 Downloads 209
Kingsley Okeoghene Enalume, Department of Electrical/Electronics Engineering, Federal University of Petroleum Resources Effurun, Effurun, Nigeria
Emmanuel Okhueleigbe, Department of Electrical/Electronics Engineering, Federal University of Petroleum Resources Effurun, Effurun, Nigeria
This paper presents a method for users to control their home and office appliances remotely using a mobile phone. This is borne out of the desire to minimise accidents and prevent damage to electrical appliances as a result of not switching off electrical appliances such as pressing iron, electric heater, etc, which can result in fire incidence and damage. The system provides the ease of turning on/off electrical appliances with its attendant safety. The access control is achieved by sending a DTMF code from the user mobile phone to the device mobile phone receiver. The received DTMF code is then decoded by the DTMF decoder which interfaces with a PIC Microcontroller to process the signal and control the appliance with the aid of a relay. The switching system presented in this paper will enable the switching of electrical appliances with AC load of 220V±5% supply from a mobile phone by simply issuing a command through the phone’s keypad to the system. This saves time used in switching ON or OFF the electrical appliances manually since the electrical appliance can be controlled from this remote system.
Kingsley Okeoghene Enalume,
Design and Construction of a Mobile Phone Based Home and Office Appliances Remote Switching System, American Journal of Embedded Systems and Applications.
Vol. 5, No. 1,
2017, pp. 1-6.
Copyright © 2017 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/
) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
R. L. Hussein Abdul, “Design and Implementation of Appliance Controller Using Traditional or Smart Phone,” International Journal of Computer Applications (IJCA), vol. 101, no. 9, pp. 44-51, September 2014.
C. K. Das, M. Sanaullah, M. G. Sarower and M. M. Hassan, “Development of a Cell Phone Based Remote Control System: An Effective Switching System for Controlling Home and Office Appliances,” International Jopurnal of Electrical & Computer Sciences (IJECS-IJENS), vol. 9, no. 10, pp. 23-29, 2009.
K. Miss Ana and V. Dr. Ritu, “Cell Phone Operated Devices with Voice Acknowledgement (Technical Home),” SSRG International Journal of Electronics and Communication Engineering (SSRG-IJECE), vol. 1, no. 6, pp. 1-4, August 2014.
M. T. Assadi, I. Mohammed and A. A. Syed, “Development of Cell Phone Based remote Vehicle Control System,” International Journal of emerging Technology and Advanced Engineering (IJETAE), vol. 5, no. 4, pp. 70-72, April 2015.
B. P. Bishwajit, A. A. S. M. Ashraf, A. Labina and N. Abu, “Development of a Cell Phone Based Vehicle remote Control System,” in IEEE International Conference on Intelligent Green Building and Smart Grid (IGBSG), 2014.
A. C. Ohajianya, O. E. Abumere, E. Osarolube and V. C. Ihesineke, “Implementation of GSM Remote Switching Using Locally Available Components in Nigeria,” International Journal of Engineering and Science (IJES), vol. 3, no. 7, pp. 13-23, 2014.
C. H. Okorafor, “A GSM Based Home Automation Using AVR,” Amorji-Nike, Enugu, 2013.
A. P. Bagade, S. L. Haridas and P. R. Indurkar, “Development of a mobile Based Device Remote Control with Voice Acknowledgement,” in National Conference on Innovative Paradigms in Engineering & Technology (NCIPET-2012), 2012.
J. Scourias, “Overview of The Global System for Mobile Communication,” 1997.
A. Rajalakshmi, S. Karthick and S. Valarmathy, “Vehicular Pollution and status Monitoring Using RFID,” International Journal of Advance Research in Science, Engineering and Technology (IJARSET), vol. 2, no. 4, pp. 580-586, 2015.
M. Razmah and R. Anitha, “Sub Station Monitoring and Control System Using GSM,” Global Journal of Advanced Engineering Technologies (GJAET), vol. 5, no. 3, pp. 285-288, 2016.
B. Saini, R. Devi, S. Dhankhar, M. Z. Haque and J. Kaur, “Smart LED Display Boards,” International Journal of Electronic and Electrical Engineering, vol. 7, no. 10, pp. 1057-1067, 2014.
A. S. Win, “Design and Construction of Microcontroller-Based Telephone Exchange System,” International Journal of Electrical, Computer, Energetic, Electronic and Communication Engineering, vol. 2, no. 10, pp. 2113-2119, 2008.