This paper provides an introduction to some important facts and developments in the plastic welding field for assisting the developments in future in plastic welding. Plastic manufactured part are regularly used in many industries. The parts made of polymeric materials and polymeric composites fulfilled very demanding criteria now-e-days. Plastics have good corrosion resistance, excellent strength to weight ratio and ability to take good finish. Plastics can be categorized as thermosets and thermoplastics. Only the thermoplastic is weld able among these two. A chemical reaction occurs during processing and curing in case of thermo sets resin, that is, as a result of irreversible cross-linking reaction in the mold. Both molded thermosets and vulcanized elastomer components cannot be reshaped by applying heat, because of the irreversible reaction that occurs. And thus in this case joining can be obtained by mechanical fastening and adhesive bonding only. In this paper few selected welding processes are discussed like hot gas welding, friction welding, hot plate welding, etc. Various important Poly Vinyl Chloride welding parameters such as welding techniques, welding temperature, welding speed, equipments requirements have also been discussed. Recent developments in this field are also discussed.
| Published in | American Journal of Mechanical and Industrial Engineering (Volume 1, Issue 2) |
| DOI | 10.11648/j.ajmie.20160102.12 |
| Page(s) | 15-19 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Poly Vinyl Chloride, P.V.C. Welding, Friction Welding, Hot Air Technique
| [1] | Vijai Kumar, M.I. Khan Development of Welding Procedure for Rigid P.V.C. Plastic by Hot air Technique |
| [2] | M. Rojek a, J. Stabik, G. Muzia. Thermography in Plastics Welding Processes assessment Volume 41 Issues 1-2 July- August 2010 |
| [3] | Thomas H. North and Geeth a Ramarathnam, University of Toranto Welding of Plastics |
| [4] | O. Balkan a,*, H. Demirer b, H. Yildirim c Morphological and Mechanical Properties of Hot Gas Welded PE, PP and PVC sheets Volume 31 Issues 1 November 2008 |
| [5] | W. S. Alley/ P. N. Baker Chapter-2 Joining and Assembly of Plastics, Volume-2 Identification, Testing and Recycling of Plastics, Handbook of plastic technology |
| [6] | Thermally Bonded PVC seams Phase 1 “State- Of- The- Art & Preliminary Welding windows Tri/Environmental, INC, A Texas research international company |
| [7] | D. Grewell. A. Benatar Agricultural and Biosystems Engineering. Iowa State University, Ames, IA, USA Welding of plastic: Fundamentals and New developments |
| [8] | James D. Van de Ven, Arthur G Erdman, Mechanical Engineering Department, University of Minnesota, Minnesota 55455 Hot Psin Welding of Thin Poly (vinyl Chloride) sheet |
| [9] | Stanley Grave line Welding of Thermoplastic Roofing Membranes Subjected to Different Conditioning procedures Journal of ASTM International, Vol.4, No.8 Paper ID JAI101018 |
| [10] | American Plastic Welding Technologies, Hot Air Welding Guide For Plastic Repairs www.bak-ag.com. |
| [11] | Mahmood Alam, (Dr.) M. I. Khan, Integral University, Luck now, state-of-the-art in rigid p. v. c. Plastic welding by hot air Technique, International Journal of Technical Research and Applications e-ISSN: 2320-8163,www.ijtra.com Volume 1, Issue 2 (May-June 2013), PP. 20-23 |
| [12] | Schaible, S., Cakmak, M.: Dynamics and Structure Development in Spin Welding of Polyvinylidene Fluoride Cylindrical Rods, Int. Polym. Process. 10, p. 270 (1995) |
| [13] | Grewell, D., Benatar, A.: A Process Comparison of Orbital and Linear Vibration Welding of Thermoplastics, Annual Technical Conference for the Society of Plastic Engineers Proceedings, Society of Plastics Engineers, Brookfield, CT (1999). |
| [14] | Md Shakibul Haque, Manoj Kumar and Adnan Khan: Hot Gas Welding of Plastic: Fundamentals & Importance, Invertis Journal of Science and Technology, Vol. 8, No. 4, 2015 ; pp. 216-219 (Printed: ISSN 0973-8940 Online: ISSN 2454-762X) |
| [15] | Md Shakibul Haque, Inayat Hussain, Gaurav Agarwal, Khwaja Moeed, Mohd Anees Siddiqui: Experimental Analysis of Mechanical Behaviour of Poly Vinyl Chloride (PVC) Plastic Welded through the Fabricated Experimental Set-up for Hot Air Welding, International Journal for Scientific Research & Development, Vol. 3, Issue 11, 2016, ISSN (online): 2321-0613 |
| [16] | Md Shakibul Haque, Inayat Hussain, Proff. (Dr.) Athar Hussain, Mohd Anees Siddiqui, Proff. (Dr.) Mohd. Ibrahim Khan: Study and Experimental Modelling of Welding Parameters on Hardness of Hot Air Welded Poly Vinyl Chloride (PVC) Plastic, International Journal for Scientific Research & Development, Vol. 3, Issue 10, 2015, ISSN (online): 2321-0613 |
| [17] | Md Shakibul Haque, Inayat Hussain, Athar Hussain and Mohd Anees Siddiqui: An Experimental Analysis to Determine the Effects of Welding Parameters on Tensile Strength of Hot Air Welded Poly Vinyl Chloride (PVC) Plastic, S-JPSET : Vol. 7, Issue 2, copyright @ samriddhi,2010-2015 ISSN : 2229-7111 (Print) &ISSN:2454-5767(Online) http://dx.doi.org/10.18090/samriddhi.v7i2.8629 |
| [18] | Hoomam Ahamad, Mahmood Alam, Md Shakibul Haque, Shyam Narayan Pandey, Mohd. Amanuddin: Welding of Plastics through Hot Gas Technique: A Review, Global Research and Development Journal for Engineering Volume 1Issue 6 May 2016 ISSN: 2455-5703 |
APA Style
Md Shakibul Haque, Mohd. Anees Siddiqui. (2016). Plastic Welding: Important Facts and Developments. American Journal of Mechanical and Industrial Engineering, 1(2), 15-19. https://doi.org/10.11648/j.ajmie.20160102.12
ACS Style
Md Shakibul Haque; Mohd. Anees Siddiqui. Plastic Welding: Important Facts and Developments. Am. J. Mech. Ind. Eng. 2016, 1(2), 15-19. doi: 10.11648/j.ajmie.20160102.12
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ajmie.20160102.12,
author = {Md Shakibul Haque and Mohd. Anees Siddiqui},
title = {Plastic Welding: Important Facts and Developments},
journal = {American Journal of Mechanical and Industrial Engineering},
volume = {1},
number = {2},
pages = {15-19},
doi = {10.11648/j.ajmie.20160102.12},
url = {https://doi.org/10.11648/j.ajmie.20160102.12},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmie.20160102.12},
abstract = {This paper provides an introduction to some important facts and developments in the plastic welding field for assisting the developments in future in plastic welding. Plastic manufactured part are regularly used in many industries. The parts made of polymeric materials and polymeric composites fulfilled very demanding criteria now-e-days. Plastics have good corrosion resistance, excellent strength to weight ratio and ability to take good finish. Plastics can be categorized as thermosets and thermoplastics. Only the thermoplastic is weld able among these two. A chemical reaction occurs during processing and curing in case of thermo sets resin, that is, as a result of irreversible cross-linking reaction in the mold. Both molded thermosets and vulcanized elastomer components cannot be reshaped by applying heat, because of the irreversible reaction that occurs. And thus in this case joining can be obtained by mechanical fastening and adhesive bonding only. In this paper few selected welding processes are discussed like hot gas welding, friction welding, hot plate welding, etc. Various important Poly Vinyl Chloride welding parameters such as welding techniques, welding temperature, welding speed, equipments requirements have also been discussed. Recent developments in this field are also discussed.},
year = {2016}
}
TY - JOUR T1 - Plastic Welding: Important Facts and Developments AU - Md Shakibul Haque AU - Mohd. Anees Siddiqui Y1 - 2016/09/22 PY - 2016 N1 - https://doi.org/10.11648/j.ajmie.20160102.12 DO - 10.11648/j.ajmie.20160102.12 T2 - American Journal of Mechanical and Industrial Engineering JF - American Journal of Mechanical and Industrial Engineering JO - American Journal of Mechanical and Industrial Engineering SP - 15 EP - 19 PB - Science Publishing Group SN - 2575-6060 UR - https://doi.org/10.11648/j.ajmie.20160102.12 AB - This paper provides an introduction to some important facts and developments in the plastic welding field for assisting the developments in future in plastic welding. Plastic manufactured part are regularly used in many industries. The parts made of polymeric materials and polymeric composites fulfilled very demanding criteria now-e-days. Plastics have good corrosion resistance, excellent strength to weight ratio and ability to take good finish. Plastics can be categorized as thermosets and thermoplastics. Only the thermoplastic is weld able among these two. A chemical reaction occurs during processing and curing in case of thermo sets resin, that is, as a result of irreversible cross-linking reaction in the mold. Both molded thermosets and vulcanized elastomer components cannot be reshaped by applying heat, because of the irreversible reaction that occurs. And thus in this case joining can be obtained by mechanical fastening and adhesive bonding only. In this paper few selected welding processes are discussed like hot gas welding, friction welding, hot plate welding, etc. Various important Poly Vinyl Chloride welding parameters such as welding techniques, welding temperature, welding speed, equipments requirements have also been discussed. Recent developments in this field are also discussed. VL - 1 IS - 2 ER -
Information
Email: