In this study, wastewater generated from Africa tannery in Khartoum North was investigated for removing of chromium from a wastewater by utilizing Bentonite. Experiments were carried out in order to obtain the optimum dose of Bentonite to be applied for the best removal of chromium and other wastewater parameters which include chemical oxygen demand, Oil and grease, total suspended solid, and chloride. For a 15mg/L dose of Bentonite removal rates of 99%, 44%, 94%, 75% and 53% of chromium(Cr), chemical oxygen demand (C.O.D), total suspended solid (T.S.S) and chloride (Cl) were respectively obtained. The Removal time for the above dose 15 mg/L was 6 hours. The results of the test were statistically analyzed by regression technique and a predication model was obtained after three trends of testing (linear, Exponential and polynomial). The exponential trend was the best (R2=0.9368). The prediction model was validated by comparing predicted and measured data and good fit of data were obtained. Therefore, the use of Bentonite to remove chromium is considered as a very successful method, and it can be a solution to the problem of industrial waste resulting from the tanning industry.
| Published in | International Journal of Fluid Mechanics & Thermal Sciences (Volume 1, Issue 2) |
| DOI | 10.11648/j.ijfmts.20150102.12 |
| Page(s) | 25-29 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Wastewater, Tannery, Bentonite, Heavy Metals, Sudan
| [1] | Schroder.J.H. (1982) .Aspect of the coastal zone management of Sudanese Red sea: characteristic and Resources, pollution, conservation research, - Inst. Environmental studies, University of Khartoum, Environmental Research Reports, Nr.3, 53S. |
| [2] | S.k.Garg, (2010), Sewage disposal and air pollution engineering PB, Khanna Publishers. |
| [3] | Kuppusamy Ranganathan, Shreedevi D. Kabadgi (2011), Studies on Feasibility of Reverse Osmosis (Membrane) Technology for Treatment of Tannery Wastewater, Journal of Environmental Protection, 2, 37-46. |
| [4] | VARSHA MIDHA_ and APURBA DEY (2008), BIOLOGICAL TREATMENT OF TANNERY WASTEWATER FOR SULFIDE REMOVAL, Int. J. Chem. Sci.: 6(2), 2008, 472-486. |
| [5] | S. Hammami, A. Ouejhani, N. Bellakhal, M. Dachraoui, Application of Doehlert matrix to determine the optimal conditions of electrochemical treatment of tannery effluents J. Hazard. Mater. 163 (2009) 251-258. |
| [6] | Alebel Abebe Belay (2010), Impacts of Chromium from Tannery Effluent and Evaluation of Alternative Treatment Options, Journal of Environmental Protection, 1, 53-58. |
| [7] | X. Josephine Jenitta, V. Daphne Vivienne Gnanasalomi, J. Joel Gnanadoss, (2013), TREATMENT OF LEATHER EFFLUENTS AND WASTE USING FUNGI, International Journal of Computing Algorithm Volume: 02, October 2013, Pages: 294-298. |
| [8] | Elbeely, K., Hassan (2011), Does privatization work? The story of Sudan’s White Nile tannery, Jou of US.China public administration, volume 8 No. 4. |
| [9] | Barkat, M., Chegrouche, S., Mellah, A., Bensmain, B., Nibou, D. and Boufatit, M. (2014) Application of Algerian Bentonite in the Removal of Cadmium (II) and Chromium (VI) from Aqueous Solutions. Journal of Surface Engineered Materials and Advanced Technology, 4, 210-226. |
| [10] | M.I. Abdou, A.M. Al-sabagh, M.M. Dardir (2013), Evaluation of Egyptian bentonite and nano-bentonite as drilling mud, Egyptian Journal of Petroleum Volume 22, PP. 53–59. |
| [11] | M.Onal (2006), Phyisco-chemical properties of Bentonite: An Overview, commun. fac. sci. Univ. Ank. series B Volume52(2). PP. 7-21. |
| [12] | American Public Health Organization (1992), Standard Methods for the Examination of water and wastewater, 18th edition. |
APA Style
Mohamed Ahmed Adam Khdam, Abusabah E. Elemam, Mohamedabusgra E. Elmam. (2015). An Experimental Investigation on Addition of Bentonite on Tannery Wastewater Characteristics. International Journal of Fluid Mechanics & Thermal Sciences, 1(2), 25-29. https://doi.org/10.11648/j.ijfmts.20150102.12
ACS Style
Mohamed Ahmed Adam Khdam; Abusabah E. Elemam; Mohamedabusgra E. Elmam. An Experimental Investigation on Addition of Bentonite on Tannery Wastewater Characteristics. Int. J. Fluid Mech. Therm. Sci. 2015, 1(2), 25-29. doi: 10.11648/j.ijfmts.20150102.12
AMA Style
Mohamed Ahmed Adam Khdam, Abusabah E. Elemam, Mohamedabusgra E. Elmam. An Experimental Investigation on Addition of Bentonite on Tannery Wastewater Characteristics. Int J Fluid Mech Therm Sci. 2015;1(2):25-29. doi: 10.11648/j.ijfmts.20150102.12
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ijfmts.20150102.12,
author = {Mohamed Ahmed Adam Khdam and Abusabah E. Elemam and Mohamedabusgra E. Elmam},
title = {An Experimental Investigation on Addition of Bentonite on Tannery Wastewater Characteristics},
journal = {International Journal of Fluid Mechanics & Thermal Sciences},
volume = {1},
number = {2},
pages = {25-29},
doi = {10.11648/j.ijfmts.20150102.12},
url = {https://doi.org/10.11648/j.ijfmts.20150102.12},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijfmts.20150102.12},
abstract = {In this study, wastewater generated from Africa tannery in Khartoum North was investigated for removing of chromium from a wastewater by utilizing Bentonite. Experiments were carried out in order to obtain the optimum dose of Bentonite to be applied for the best removal of chromium and other wastewater parameters which include chemical oxygen demand, Oil and grease, total suspended solid, and chloride. For a 15mg/L dose of Bentonite removal rates of 99%, 44%, 94%, 75% and 53% of chromium(Cr), chemical oxygen demand (C.O.D), total suspended solid (T.S.S) and chloride (Cl) were respectively obtained. The Removal time for the above dose 15 mg/L was 6 hours. The results of the test were statistically analyzed by regression technique and a predication model was obtained after three trends of testing (linear, Exponential and polynomial). The exponential trend was the best (R2=0.9368). The prediction model was validated by comparing predicted and measured data and good fit of data were obtained. Therefore, the use of Bentonite to remove chromium is considered as a very successful method, and it can be a solution to the problem of industrial waste resulting from the tanning industry.},
year = {2015}
}
TY - JOUR T1 - An Experimental Investigation on Addition of Bentonite on Tannery Wastewater Characteristics AU - Mohamed Ahmed Adam Khdam AU - Abusabah E. Elemam AU - Mohamedabusgra E. Elmam Y1 - 2015/06/01 PY - 2015 N1 - https://doi.org/10.11648/j.ijfmts.20150102.12 DO - 10.11648/j.ijfmts.20150102.12 T2 - International Journal of Fluid Mechanics & Thermal Sciences JF - International Journal of Fluid Mechanics & Thermal Sciences JO - International Journal of Fluid Mechanics & Thermal Sciences SP - 25 EP - 29 PB - Science Publishing Group SN - 2469-8113 UR - https://doi.org/10.11648/j.ijfmts.20150102.12 AB - In this study, wastewater generated from Africa tannery in Khartoum North was investigated for removing of chromium from a wastewater by utilizing Bentonite. Experiments were carried out in order to obtain the optimum dose of Bentonite to be applied for the best removal of chromium and other wastewater parameters which include chemical oxygen demand, Oil and grease, total suspended solid, and chloride. For a 15mg/L dose of Bentonite removal rates of 99%, 44%, 94%, 75% and 53% of chromium(Cr), chemical oxygen demand (C.O.D), total suspended solid (T.S.S) and chloride (Cl) were respectively obtained. The Removal time for the above dose 15 mg/L was 6 hours. The results of the test were statistically analyzed by regression technique and a predication model was obtained after three trends of testing (linear, Exponential and polynomial). The exponential trend was the best (R2=0.9368). The prediction model was validated by comparing predicted and measured data and good fit of data were obtained. Therefore, the use of Bentonite to remove chromium is considered as a very successful method, and it can be a solution to the problem of industrial waste resulting from the tanning industry. VL - 1 IS - 2 ER -
Information
Email: