International Journal of Electrical Components and Energy Conversion

| Peer-Reviewed |

Electro-thermal Modeling of Permanent Magnet Synchronous Motor

Received: 28 May 2015    Accepted: 03 June 2015    Published: 08 June 2015
Views:       Downloads:

Share This Article

Abstract

In this paper, we present a methodology for electro-thermal characterization of a permanent magnet synchronous motor (PMSM). This modeling approach is in the aim to evaluating the different temperatures in different active parts of the motor, to choose the type and characteristics of the cooling system to use. This study led to the selection of a cooling system by water forced convection.

DOI 10.11648/j.ijecec.20150102.13
Published in International Journal of Electrical Components and Energy Conversion (Volume 1, Issue 2, June 2015)
Page(s) 63-68
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Electro-Thermal, Modeling, Nodal Method, Simulation, Permanents Magnets Motor, Cooling System

References
[1] M.N. Ajour, L.A. Dissado, J.C. Fothergill, P.N. Norman, “Dielectric spectroscopy of Epoxy/Glass composite materials”, Conference on Electrical Insulation and Dielectric Phenomena, (2002), pp.438-441,
[2] %A. Apicella, L. Egiziano, L. Nicolais and V. Tucci, “Environmental degradation of the electrical and thermal properties of organic insulating materials”, Journal of materials science, (1988), vol.23, p. 729-735
[3] %TOUNSI et R. NEJI: «Design of an Axial Flux Brushless DC Motor with Concentrated Winding for Electric Vehicles», Journal of Electrical Engineering (JEE), Volume 10, 2010 - Edition: 2, pp. 134-146.
[4] %A. AMMOUS, B. ALLARD, H. MOREL: «Transient temperature mesurements and modeling of IGBT’s under short circuit», IEEE transaction electronic devices, vol. 13, n° 1, 1998, p. 12-25.
[5] %P. H. Mellor, D. Roberts, D. R Turner. «Lumped Parameter Thermal Model for Electrical machine of TEFC design». IEEE Trans on Electrical Power Application., 1991, 138(5): 205-2018.
[6] %Gerling D, Dajaku G. Novel «lumped-parameter thermal model for electrical systems» Power Electronics and Applications, 2005 European Conference on. IEEE, 2005: 10 pp.-P. 10.
[7] %S.TOUNSI, R.NÉJI, F.SELLAMI : « Conception d'un actionneur à aimants permanents pour véhicules électriques », Revue Internationale de Génie Électrique volume 9/6 2006 - pp.693-718.
[8] %Staton D, Boglietti A, Cavagnino A. «Solving the more difficult aspects of electric motor thermal analysis in small and medium size industrial induction motors». Energy conversion, IEEE transactions on, 2005, 20(3): 620-628.
[9] %Sun Xikai, Cheng Ming. «Thermal analysis and cooling system design of dual mechanical port machine for wind power application». IEEE Transactions on Industrial Electronics, May 2013, 60(5): 1724-1733.
[10] %Zhu Sa, Cheng Ming. «Core loss analysis and calculation of stator permanent magnet machine considering dc-biased magnetic induction». IEEE Transactions on Industrial Electronics. Digital Object Identifier: 10.1109/TIE.2014.2300062.
Author Information
  • National School of Electronics and Telecommunications of Sfax, Sfax University, SETIT Research Unit, Sfax, Tunisia

Cite This Article
  • APA Style

    Souhir Tounsi. (2015). Electro-thermal Modeling of Permanent Magnet Synchronous Motor. International Journal of Electrical Components and Energy Conversion, 1(2), 63-68. https://doi.org/10.11648/j.ijecec.20150102.13

    Copy | Download

    ACS Style

    Souhir Tounsi. Electro-thermal Modeling of Permanent Magnet Synchronous Motor. Int. J. Electr. Compon. Energy Convers. 2015, 1(2), 63-68. doi: 10.11648/j.ijecec.20150102.13

    Copy | Download

    AMA Style

    Souhir Tounsi. Electro-thermal Modeling of Permanent Magnet Synchronous Motor. Int J Electr Compon Energy Convers. 2015;1(2):63-68. doi: 10.11648/j.ijecec.20150102.13

    Copy | Download

  • @article{10.11648/j.ijecec.20150102.13,
      author = {Souhir Tounsi},
      title = {Electro-thermal Modeling of Permanent Magnet Synchronous Motor},
      journal = {International Journal of Electrical Components and Energy Conversion},
      volume = {1},
      number = {2},
      pages = {63-68},
      doi = {10.11648/j.ijecec.20150102.13},
      url = {https://doi.org/10.11648/j.ijecec.20150102.13},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ijecec.20150102.13},
      abstract = {In this paper, we present a methodology for electro-thermal characterization of a permanent magnet synchronous motor (PMSM). This modeling approach is in the aim to evaluating the different temperatures in different active parts of the motor, to choose the type and characteristics of the cooling system to use. This study led to the selection of a cooling system by water forced convection.},
     year = {2015}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Electro-thermal Modeling of Permanent Magnet Synchronous Motor
    AU  - Souhir Tounsi
    Y1  - 2015/06/08
    PY  - 2015
    N1  - https://doi.org/10.11648/j.ijecec.20150102.13
    DO  - 10.11648/j.ijecec.20150102.13
    T2  - International Journal of Electrical Components and Energy Conversion
    JF  - International Journal of Electrical Components and Energy Conversion
    JO  - International Journal of Electrical Components and Energy Conversion
    SP  - 63
    EP  - 68
    PB  - Science Publishing Group
    SN  - 2469-8059
    UR  - https://doi.org/10.11648/j.ijecec.20150102.13
    AB  - In this paper, we present a methodology for electro-thermal characterization of a permanent magnet synchronous motor (PMSM). This modeling approach is in the aim to evaluating the different temperatures in different active parts of the motor, to choose the type and characteristics of the cooling system to use. This study led to the selection of a cooling system by water forced convection.
    VL  - 1
    IS  - 2
    ER  - 

    Copy | Download

  • Sections