This paper presents the analysis and evaluates different control strategies of shunt active power filters which are used to reduce harmonic distortion created by an industrial paper factory. The model of the whole system has been carried out by Matlab/Simulink. In order to investigate the accuracy of the simulated model, harmonic analysis of simulation results has been compared with measurements from the electrical networks of a Paper Industrial Factory using harmonic analyzer. The consistency of simulation and measured results proves the accuracy of the system modeling. It also proves the validity of using Shunt Active Power Filters to reduce the harmonic distortion in the factory network. Four different control techniques, namely Unit Vector Template Generation, Instantaneous Active and Reactive theory, Synchronous Reference Frame theory and a proposed control strategy that combines the Synchronous Reference Frame and the Unit Vector Template Generation theories, have been studied. Results of each technique were satisfactory and meet the IEEE-519 Standard, However, when the source voltage is distorted the compensation capability for some control strategies is not equal.
| Published in | American Journal of Management Science and Engineering (Volume 2, Issue 3) |
| DOI | 10.11648/j.ajmse.20170203.12 |
| Page(s) | 41-51 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Harmonics, Power Quality, Total Harmonic Distortion, Variable Frequency Drive, Shunt Active Power Filter
| [1] | IEEE Standards Association, IEEE Std 519-2014-Recommended Practice and Requirements for Harmonic Control in Electric Power Systems. IEEE Power and Energy Society, 29. |
| [2] | Akagi, H., Watanabe, E. H. and Aredes, M., 2017. Instantaneous power theory and applications to power conditioning. John Wiley & Sons. |
| [3] | Mortezaei, A., Lute, C., Simoes, M. G., Marafão, F. P. and Boglia, A., 2014, September. PQ, DQ and CPT control methods for shunt active compensators—A comparative study. In Energy Conversion Congress and Exposition (ECCE), 2014 IEEE (pp. 2994-3001). IEEE. |
| [4] | Soares, V., Verdelho, P. and Marques, G. D., 2000. An instantaneous active and reactive current component method for active filters. IEEE Transactions on Power Electronics, 15 (4), pp.660-669. |
| [5] | UdayaSri, B., Rao, P. M., Mohanta, D. K. and Varma, M. P. C., 2016, October. Improvement of power quality using PQ-theory shunt-active power filter. In Signal Processing, Communication, Power and Embedded System (SCOPES), 2016 International Conference on (pp. 2083-2088). IEEE. |
| [6] | Montes, A. O. and Ramos, G., 2013, July. Instantaneous pq theory for harmonic compensation via shunt active power filter. In Power Electronics and Power Quality Applications (PEPQA), 2013 Workshop on (pp. 1-4). IEEE. |
| [7] | Gohil, S. N., Makwana, M. V., Kadivar, K. T. and Tetar, G. J., 2013, December. Three phase unified power quality conditioner (UPQC) for power quality improvement by using UVTG technique. In Renewable Energy and Sustainable Energy (ICRESE), 2013 International Conference on (pp. 151-156). IEEE. |
| [8] | Pal, Yash, A. Swarup, and B. Singh. "A New Topology of Three-Phase Four-Wire UPQC with a Simplified Control Algorithm." Majlesi Journal of Electrical Engineering 6.1 (2012). |
| [9] | Prathyusha, D. and Venkatesh, P., 2015. UVTG Control Strategy for Three Phase Four Wire UPQC to Improve Power Quality. Int. Electr. Eng. J, 6 (9), pp. 1988-1993. |
| [10] | Sundarabalan, C. K. and Sathishbabu, P., 2012. Unified Power Quality Conditioner for Enhancement of Power Quality and Hybrid Power Generation Injection to Grid. International Journal of Modern Engineering Research (IJMER), 2 (2). |
| [11] | Vora, S., Bhatt, D. H. and Thakar, J. B., 2014. Comparative study on different control strategies using shunt active power filter for current harmonics mitigation. International Journal For Technological Research In Engineering, 1 (10), pp. 2347-4718. |
| [12] | Samal, S., Hota, P. K. and Barik, P. K., 2016, October. Harmonics mitigation by using shunt active power filter under different load condition. In Signal Processing, Communication, Power and Embedded System (SCOPES), 2016 International Conference on (pp. 94-98). IEEE. |
| [13] | Kumari, N. and Awashthi, I., 2013. Harmonic Compensation Using Shunt Active Power Filter in Power System Using Matlab. International Journal of Scientific Engineering and Research, 1 (3). |
APA Style
Mohamed Aboelkasem Mohamd Abdelaal, Mahmoud Abdelnaby Sayed, Essam E. M. Mohamed, Mohamed Mahmoud Hamada. (2017). Comparison of Shunt Active Power Filter Control Strategies for Harmonic Compensation in a Paper Industrial Factory. American Journal of Management Science and Engineering, 2(3), 41-51. https://doi.org/10.11648/j.ajmse.20170203.12
ACS Style
Mohamed Aboelkasem Mohamd Abdelaal; Mahmoud Abdelnaby Sayed; Essam E. M. Mohamed; Mohamed Mahmoud Hamada. Comparison of Shunt Active Power Filter Control Strategies for Harmonic Compensation in a Paper Industrial Factory. Am. J. Manag. Sci. Eng. 2017, 2(3), 41-51. doi: 10.11648/j.ajmse.20170203.12
AMA Style
Mohamed Aboelkasem Mohamd Abdelaal, Mahmoud Abdelnaby Sayed, Essam E. M. Mohamed, Mohamed Mahmoud Hamada. Comparison of Shunt Active Power Filter Control Strategies for Harmonic Compensation in a Paper Industrial Factory. Am J Manag Sci Eng. 2017;2(3):41-51. doi: 10.11648/j.ajmse.20170203.12
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ajmse.20170203.12,
author = {Mohamed Aboelkasem Mohamd Abdelaal and Mahmoud Abdelnaby Sayed and Essam E. M. Mohamed and Mohamed Mahmoud Hamada},
title = {Comparison of Shunt Active Power Filter Control Strategies for Harmonic Compensation in a Paper Industrial Factory},
journal = {American Journal of Management Science and Engineering},
volume = {2},
number = {3},
pages = {41-51},
doi = {10.11648/j.ajmse.20170203.12},
url = {https://doi.org/10.11648/j.ajmse.20170203.12},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmse.20170203.12},
abstract = {This paper presents the analysis and evaluates different control strategies of shunt active power filters which are used to reduce harmonic distortion created by an industrial paper factory. The model of the whole system has been carried out by Matlab/Simulink. In order to investigate the accuracy of the simulated model, harmonic analysis of simulation results has been compared with measurements from the electrical networks of a Paper Industrial Factory using harmonic analyzer. The consistency of simulation and measured results proves the accuracy of the system modeling. It also proves the validity of using Shunt Active Power Filters to reduce the harmonic distortion in the factory network. Four different control techniques, namely Unit Vector Template Generation, Instantaneous Active and Reactive theory, Synchronous Reference Frame theory and a proposed control strategy that combines the Synchronous Reference Frame and the Unit Vector Template Generation theories, have been studied. Results of each technique were satisfactory and meet the IEEE-519 Standard, However, when the source voltage is distorted the compensation capability for some control strategies is not equal.},
year = {2017}
}
TY - JOUR T1 - Comparison of Shunt Active Power Filter Control Strategies for Harmonic Compensation in a Paper Industrial Factory AU - Mohamed Aboelkasem Mohamd Abdelaal AU - Mahmoud Abdelnaby Sayed AU - Essam E. M. Mohamed AU - Mohamed Mahmoud Hamada Y1 - 2017/08/11 PY - 2017 N1 - https://doi.org/10.11648/j.ajmse.20170203.12 DO - 10.11648/j.ajmse.20170203.12 T2 - American Journal of Management Science and Engineering JF - American Journal of Management Science and Engineering JO - American Journal of Management Science and Engineering SP - 41 EP - 51 PB - Science Publishing Group SN - 2575-1379 UR - https://doi.org/10.11648/j.ajmse.20170203.12 AB - This paper presents the analysis and evaluates different control strategies of shunt active power filters which are used to reduce harmonic distortion created by an industrial paper factory. The model of the whole system has been carried out by Matlab/Simulink. In order to investigate the accuracy of the simulated model, harmonic analysis of simulation results has been compared with measurements from the electrical networks of a Paper Industrial Factory using harmonic analyzer. The consistency of simulation and measured results proves the accuracy of the system modeling. It also proves the validity of using Shunt Active Power Filters to reduce the harmonic distortion in the factory network. Four different control techniques, namely Unit Vector Template Generation, Instantaneous Active and Reactive theory, Synchronous Reference Frame theory and a proposed control strategy that combines the Synchronous Reference Frame and the Unit Vector Template Generation theories, have been studied. Results of each technique were satisfactory and meet the IEEE-519 Standard, However, when the source voltage is distorted the compensation capability for some control strategies is not equal. VL - 2 IS - 3 ER -
Information
Email: