Development of the Composition and Modes of Spraying Antifriction Coating Reinforced with Quasicrystals for the Manufacture of Sliding Bearings

Silchenko Olga Borisovna; Siluyanova Marina Vladimirovna

doi:doi:10.11648/j.ajetm.20190406.11

| Peer-Reviewed

Development of the Composition and Modes of Spraying Antifriction Coating Reinforced with Quasicrystals for the Manufacture of Sliding Bearings

Silchenko Olga Borisovna, Siluyanova Marina Vladimirovna

Published in American Journal of Engineering and Technology Management (Volume 4, Issue 6)

Received: 21 March 2019 Accepted: 26 June 2019 Published: 27 November 2019

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The paper presents the compositions of coatings from composite materials reinforced with quasicrystals. The composition and mode of application of cold gas-dynamic deposition of antifriction coating based on composite materials reinforced with quasicrystals for the manufacture of sliding bearings have been determined and determined. Quasicrystals of the Al-Cu-Fe system, metal composite coatings based on copper reinforced with quasicrystal line particles were used for research. In the course of the work, the compositions of quasicrystal-reinforced coatings were developed, the optimal composition and modes of applying the coating by cold gas-dynamic spraying were determined. According to the optimal mode, samples were made and their mechanical and tribological properties were investigated.

Published in	American Journal of Engineering and Technology Management (Volume 4, Issue 6)
DOI	10.11648/j.ajetm.20190406.11
Page(s)	79-82
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Gas-Dynamic Spraying, Quasicrystals, Coatings from Composite Materials, Tribological Properties

References

[1]	B. Zakharov, M. G. Trofimov, L. I. Guseva, et al. On the adhesion strength of coatings applied by plasma spraying // Powder Metallurgy. 1970. №11. Pp. 71-76.
[2]	Denisov L. V., Boytsov A. G., Siluyanova M. V. Providing operational properties of parts and components of a gas-turbine engine by local surface doping // Herald of Samara University. Aerospace engineering, technology and engineering. № 2. Pp 19-24.
[3]	Nizovtsev V. E., Silchenko O B, Siluyanova M. V. et al. Some estimates of the stress-strain state of ceramic composite materials with regard to technological pores // Bulletin of the Bryansk State Technical University No. 5. Pp. 52-63.
[4]	Boitsov A. G., Siluyanova M. V., Kuritsyna V. V. Electric-Discharge Milling of Small Airplane-Engine Components (Technological capabilities of processing by electroerosive milling of small-sized parts and elements of aircraft engines) // Russian Engineering Research. 2018. T. 38.№ 7. рр. 552-556.
[5]	Silchenko, OB, Siluianova, MV, Nizovtsev, V. E., Klimov, DA, Kornilov, A. A. On the prospects for the use of nanostructured heterophase polyfunctional composite materials in the aircraft engine industry // Materials Science. 2018.№1. Pp. 50-57.
[6]	Siluyanova M. V., Fertikov A. O. Improving the friction units of power plants by applying sprayed coatings of ceramic composites // Vestnik Samara University. Aerospace engineering, technology and engineering. 2018. No. 2. Pp. 122-131.
[7]	Sil’chenko O. B., Siluyanova M. V., Kuritsyna V. V. Diagnostics of Dimensionally Controlled Microgrinding to Meet Quality Specifications // Russian Engineering Research. 2018. Т. 38. № 8. рр. 604-609.
[8]	Musil J., Vicek J. // 5th Conf. on Modification of Materials with Particle Beams and Plasma Flows. Tomsk, 2000. P. 393-398.
[9]	Yu. A. Abuzin, A. S. Yudin “Investigation of the features of quasicrystals when creating materials for space, aviation, motor engineering and other sectors of the national economy” of FSUE “VIAM” in the collection of reports of the first All-Russian meeting of quasicrystals, April 2003.
[10]	Scientific basis of the technology of cold gas-dynamic spraying (CGN) and the properties of the deposited materials: monograph / A. P. Alkhimov, V. F.
[11]	Application for OTR №7718 "Method for the production of composite coatings" dated 10/20/2009.
[12]	Kelly P. J., Arnell R. D. // Vacuum. 2000. Vol. 56. P. 159-172.
[13]	Shiryaev S. A., Atamanov M. V., Guseva M. I., Martinenko Yu. V., Mitin A. V., Mitin V. S., Moskovkin P. G. // Preporation and properties of composite coating based on metal-carbon with nanocrystalline structure // Journal of Technique 2002, T. 72, v. 2.
[14]	Mitin V. S., Sharipov E. I., Mitin A. V. // High deposition rate magnetrons - innovative coating technology: key elements and advantages // Surface Engineering 2006 Vol. 22 no 1.
[15]	Shelekhov E. V., Sviridova T. A. // Programs for X-ray analysis of polycrystals // Metal Science and Heat treatment, 2000. T. 42. № 7-8. p. 309-113.
[16]	Kryukova L. M., Makalkina E. A., Salikhov S. V. // Parameter estimation of nanostructured state. I. An integrated approach and mathematical research and treatment experimental date //Journal of Materials Science 2010 v. 8
[17]	Portnoi V. K., Leonov A. V., Mudretsova S. N., and Fedotov S. A. // Formation of Nickel Carbide in the Course of Deformation Treatment of Ni-C Mixtures //The Physics of Metals and Metallography 2010. v. 109, N2 p. 153-161.
[18]	Krawietr Z., Wehner B., Sebalt T., Dietsch R. // Investigation of Termal Agingof Ni/C Multilayers by X-Ray Methods // Mater. Sci. Forum. 1994, v. 166-169. p. 1247-1253.

Cite This Article

Plain Text BibTeX RIS

APA Style

Silchenko Olga Borisovna, Siluyanova Marina Vladimirovna. (2019). Development of the Composition and Modes of Spraying Antifriction Coating Reinforced with Quasicrystals for the Manufacture of Sliding Bearings. American Journal of Engineering and Technology Management, 4(6), 79-82. https://doi.org/10.11648/j.ajetm.20190406.11

Copy | Download

ACS Style

Silchenko Olga Borisovna; Siluyanova Marina Vladimirovna. Development of the Composition and Modes of Spraying Antifriction Coating Reinforced with Quasicrystals for the Manufacture of Sliding Bearings. Am. J. Eng. Technol. Manag. 2019, 4(6), 79-82. doi: 10.11648/j.ajetm.20190406.11

Copy | Download

AMA Style

Silchenko Olga Borisovna, Siluyanova Marina Vladimirovna. Development of the Composition and Modes of Spraying Antifriction Coating Reinforced with Quasicrystals for the Manufacture of Sliding Bearings. Am J Eng Technol Manag. 2019;4(6):79-82. doi: 10.11648/j.ajetm.20190406.11

Copy | Download

@article{10.11648/j.ajetm.20190406.11,
  author = {Silchenko Olga Borisovna and Siluyanova Marina Vladimirovna},
  title = {Development of the Composition and Modes of Spraying Antifriction Coating Reinforced with Quasicrystals for the Manufacture of Sliding Bearings},
  journal = {American Journal of Engineering and Technology Management},
  volume = {4},
  number = {6},
  pages = {79-82},
  doi = {10.11648/j.ajetm.20190406.11},
  url = {https://doi.org/10.11648/j.ajetm.20190406.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajetm.20190406.11},
  abstract = {The paper presents the compositions of coatings from composite materials reinforced with quasicrystals. The composition and mode of application of cold gas-dynamic deposition of antifriction coating based on composite materials reinforced with quasicrystals for the manufacture of sliding bearings have been determined and determined. Quasicrystals of the Al-Cu-Fe system, metal composite coatings based on copper reinforced with quasicrystal line particles were used for research. In the course of the work, the compositions of quasicrystal-reinforced coatings were developed, the optimal composition and modes of applying the coating by cold gas-dynamic spraying were determined. According to the optimal mode, samples were made and their mechanical and tribological properties were investigated.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - Development of the Composition and Modes of Spraying Antifriction Coating Reinforced with Quasicrystals for the Manufacture of Sliding Bearings
AU  - Silchenko Olga Borisovna
AU  - Siluyanova Marina Vladimirovna
Y1  - 2019/11/27
PY  - 2019
N1  - https://doi.org/10.11648/j.ajetm.20190406.11
DO  - 10.11648/j.ajetm.20190406.11
T2  - American Journal of Engineering and Technology Management
JF  - American Journal of Engineering and Technology Management
JO  - American Journal of Engineering and Technology Management
SP  - 79
EP  - 82
PB  - Science Publishing Group
SN  - 2575-1441
UR  - https://doi.org/10.11648/j.ajetm.20190406.11
AB  - The paper presents the compositions of coatings from composite materials reinforced with quasicrystals. The composition and mode of application of cold gas-dynamic deposition of antifriction coating based on composite materials reinforced with quasicrystals for the manufacture of sliding bearings have been determined and determined. Quasicrystals of the Al-Cu-Fe system, metal composite coatings based on copper reinforced with quasicrystal line particles were used for research. In the course of the work, the compositions of quasicrystal-reinforced coatings were developed, the optimal composition and modes of applying the coating by cold gas-dynamic spraying were determined. According to the optimal mode, samples were made and their mechanical and tribological properties were investigated.
VL  - 4
IS  - 6
ER  -

Copy | Download

Author Information

Silchenko Olga Borisovna

Department of Technology of Production and Operation of Aircraft Engines, Institute №12 MAI (National Research University), Moscow, Russia
Siluyanova Marina Vladimirovna

Department of Technology of Production and Operation of Aircraft Engines, Institute №12 MAI (National Research University), Moscow, Russia

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Silchenko Olga Borisovna, Siluyanova Marina Vladimirovna. (2019). Development of the Composition and Modes of Spraying Antifriction Coating Reinforced with Quasicrystals for the Manufacture of Sliding Bearings. American Journal of Engineering and Technology Management, 4(6), 79-82. https://doi.org/10.11648/j.ajetm.20190406.11

Copy | Download

ACS Style

Silchenko Olga Borisovna; Siluyanova Marina Vladimirovna. Development of the Composition and Modes of Spraying Antifriction Coating Reinforced with Quasicrystals for the Manufacture of Sliding Bearings. Am. J. Eng. Technol. Manag. 2019, 4(6), 79-82. doi: 10.11648/j.ajetm.20190406.11

Copy | Download

AMA Style

Silchenko Olga Borisovna, Siluyanova Marina Vladimirovna. Development of the Composition and Modes of Spraying Antifriction Coating Reinforced with Quasicrystals for the Manufacture of Sliding Bearings. Am J Eng Technol Manag. 2019;4(6):79-82. doi: 10.11648/j.ajetm.20190406.11

Copy | Download

@article{10.11648/j.ajetm.20190406.11,
  author = {Silchenko Olga Borisovna and Siluyanova Marina Vladimirovna},
  title = {Development of the Composition and Modes of Spraying Antifriction Coating Reinforced with Quasicrystals for the Manufacture of Sliding Bearings},
  journal = {American Journal of Engineering and Technology Management},
  volume = {4},
  number = {6},
  pages = {79-82},
  doi = {10.11648/j.ajetm.20190406.11},
  url = {https://doi.org/10.11648/j.ajetm.20190406.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajetm.20190406.11},
  abstract = {The paper presents the compositions of coatings from composite materials reinforced with quasicrystals. The composition and mode of application of cold gas-dynamic deposition of antifriction coating based on composite materials reinforced with quasicrystals for the manufacture of sliding bearings have been determined and determined. Quasicrystals of the Al-Cu-Fe system, metal composite coatings based on copper reinforced with quasicrystal line particles were used for research. In the course of the work, the compositions of quasicrystal-reinforced coatings were developed, the optimal composition and modes of applying the coating by cold gas-dynamic spraying were determined. According to the optimal mode, samples were made and their mechanical and tribological properties were investigated.},
 year = {2019}
}

Copy | Download

TY  - JOUR
T1  - Development of the Composition and Modes of Spraying Antifriction Coating Reinforced with Quasicrystals for the Manufacture of Sliding Bearings
AU  - Silchenko Olga Borisovna
AU  - Siluyanova Marina Vladimirovna
Y1  - 2019/11/27
PY  - 2019
N1  - https://doi.org/10.11648/j.ajetm.20190406.11
DO  - 10.11648/j.ajetm.20190406.11
T2  - American Journal of Engineering and Technology Management
JF  - American Journal of Engineering and Technology Management
JO  - American Journal of Engineering and Technology Management
SP  - 79
EP  - 82
PB  - Science Publishing Group
SN  - 2575-1441
UR  - https://doi.org/10.11648/j.ajetm.20190406.11
AB  - The paper presents the compositions of coatings from composite materials reinforced with quasicrystals. The composition and mode of application of cold gas-dynamic deposition of antifriction coating based on composite materials reinforced with quasicrystals for the manufacture of sliding bearings have been determined and determined. Quasicrystals of the Al-Cu-Fe system, metal composite coatings based on copper reinforced with quasicrystal line particles were used for research. In the course of the work, the compositions of quasicrystal-reinforced coatings were developed, the optimal composition and modes of applying the coating by cold gas-dynamic spraying were determined. According to the optimal mode, samples were made and their mechanical and tribological properties were investigated.
VL  - 4
IS  - 6
ER  -

Copy | Download