Comprehensive Research on Development of the New Blade Bits Design
American Journal of Engineering and Technology Management
Volume 5, Issue 1, February 2020, Pages: 12-17
Received: Jan. 8, 2020; Accepted: Jan. 31, 2020; Published: Feb. 20, 2020
Views 420      Downloads 101
Authors
Boris Vladimirovich Fedorov, Department of Geology and Oil & Gas, Satpaev University, Almaty, Kazakhstan
Gulzhan Abdullaevna Kudaikulova, Limited Liability Partnership “Burmash”, Almaty, Kazakhstan
Boranbay Tovbasarovich Ratov, Institute of Geology and Oil & Gas, Caspian University, Almaty, Kazakhstan
Akniyet Rabbimuly Bayboz, Department of Geology and Oil & Gas, Satpaev University, Almaty, Kazakhstan
Article Tools
Follow on us
Abstract
This article presents data on the development of the peak-shaped blade bit with an increased productivity, resistance and reduced energy capacity used at drilling wells in soft rocks and partially in rocks of medium hardness. In order to achieve this goal a comprehensive research with the theoretical, design and development and experimental works were carried out. It is shown that the distribution of the axial load on the radial cutters of the bit is uneven, which is a reason for such complication as the "hanging" of the bit over the bottom of the well. As a result of the research works, the peak-shaped blade bit was developed and patented, which increases drilling productivity by 24%.
Keywords
Blade Bit, Peak-shaped Blade Bit, Core Destruction, Soft Rocks, Removal of Cutters, Drilling Mud, Core Breaker
To cite this article
Boris Vladimirovich Fedorov, Gulzhan Abdullaevna Kudaikulova, Boranbay Tovbasarovich Ratov, Akniyet Rabbimuly Bayboz, Comprehensive Research on Development of the New Blade Bits Design, American Journal of Engineering and Technology Management. Vol. 5, No. 1, 2020, pp. 12-17. doi: 10.11648/j.ajetm.20200501.12
Copyright
Copyright © 2020 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
References
[1]
Rakishev B. R., Fedorov B. V. Technique and technology of the construction of geotechnological wells. Almaty, KazNTU, 2013, 355с.
[2]
Sushko S. M., Kasenov A. K., Musanov A. M., Begun A. D. Drilling and equipment of the geotechnological wells. Almaty, KazNTU, 2010, 483 P.
[3]
Dick Gismin. Technological support for the improvement of drill bits. Offshore (Russia), №1 (1) September 2013, pp. 42-45.
[4]
Balaba V. I., Bekbulatov I. K., Vyshegorodtseva G. I. and others. Drilling rock destroying tool. M: Gubkin RSU Oil and Gas, 2013, 245 P.
[5]
Abaturov V. G. Physical-mechanical properties of rocks and drilling rock destroying tool. Tyumen: Publ. Oil and Gas University, 2008, 238 С.
[6]
Gandjumyan R. A., Kalinin A. G., Serdyuk N. I. Calculations in drilling. Handbook. M: RGGRU, 2007, 664 P.
[7]
Fedorov B. V., Huzina L. B., Ratov B. T., Sharauova A. B. Modeling of process of deepening wells with RDS bits. Almaty. Oil and Gas, 2017, N. 4. P. 77-85.
[8]
Popov A. N., Spivak A. I., Akbulatov T. O. and others. The technology of drilling oil and gas wells. M: Nedra, 2004, 509 P.
[9]
Biletskiy M. T., Ratov B. T., Baiboz A. R. The use of computer user programs for the analysis of theoretical models of rock destruction during drilling. Science News of Kazakhstan, N. 3, 2018, p. 80-93.
[10]
Afanasiev I. S., Ponomarev P. P. and others. Guide to drilling exploration wells. L: VITR, 2000, 580 С.
[11]
Biletskiy M. T., Ratov B. T., Bayboz A. R. Patent for the invention of the Republic of Kazakhstan. № 33077 (104033). Drill bit type peak-shaped. 10.09.2018, Bull. № 34.
[12]
Bashkatov D. N. Optimization of drilling process. N. Novgorod, Rosburmash, 2006. 33 P.
ADDRESS
Science Publishing Group
1 Rockefeller Plaza,
10th and 11th Floors,
New York, NY 10020
U.S.A.
Tel: (001)347-983-5186