The Relationship of the Density and Consumption of Drilling Mud with a Model of Rock Drillability
American Journal of Engineering and Technology Management
Volume 4, Issue 1, February 2019, Pages: 5-9
Received: Jan. 11, 2019;
Accepted: Mar. 13, 2019;
Published: Apr. 9, 2019
Views 765 Downloads 97
Gulzhan Abdullaevna Kudaikulova, Limited Liability Partnership (LLP) “Burmash”, Almaty, Kazakhstan
Boris Vladimirovich Fedorov, Department Geology and Oil-Gas Business, Kazakh National Technical University, Almaty, Kazakhstan
Aizada Baltagalievna Sharauova, Department Geology and Oil-Gas Business, Kazakh National Technical University, Almaty, Kazakhstan
Follow on us
In article it is shown the functional connection between the drillability model and the required consumption of drilling mud for cleaning the bottom of a well from destruction products. In particular, it has been shown that when drilling oil-gas wells in uncomplicated conditions, the required consumption of drilling mud is directly proportional to the current drilling speed and increases in quadratic dependence on the diameter of the well. It was found that the increase in the density of drilling mud due to contamination with drill cuttings at the revelation of "weak" formations has the greatest influence, which in certain conditions can cause hydraulic fracturing of the formation. At the revelation of formations with abnormally high pressure, an increase in the density of the contaminated drilling mud has practically not influence on the prevention of kicks.
Model of Drillability, Speed of Drilling, Density of Mud, Consumption of Mud, Contamination, Hydraulic Fracturing, Kick
To cite this article
Gulzhan Abdullaevna Kudaikulova,
Boris Vladimirovich Fedorov,
Aizada Baltagalievna Sharauova,
The Relationship of the Density and Consumption of Drilling Mud with a Model of Rock Drillability, American Journal of Engineering and Technology Management.
Vol. 4, No. 1,
2019, pp. 5-9.
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/
) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
A. G. Kalinin, A. S. Oganov, A. A. Sazonov, S. N. Bastrikov. Construction of oil and gas wells. М: Print center of Gubkin Russian State University of Oil and Gas., 2013, 690 P.
Bourgoyne A. T., Young F. S. A Multiple Regression Approach to optimal drilling and abnormal pressure detection. SPE 4238, August 1974.
Maurer W. C. The perfect-cleaning theory of rotary drilling. Journal of Pet. Tech. 2000, November.
Levitsky A. Z. The use of geology technical information in the drilling. Moscow, Nedra, 1992.
B. V. Fedorov, M. T. Aubakirov, A. B. Sharauova. About the model of drillability of oil and gas wells with PDC bits at the Uzen. Vestnik KazNRTU, vol. 1, 2017, p. 84-90
B. V. Fedorov, B. Ratov, A. B. Sharauova. Development of the PDC bits for Uzen oilfield (the Republic of Kazakhstan). East European Journal of Advanced Technology. Engineering technological systems. 3/1 (87) 2017, p. 16-23.
Levitsky A. Z. Use of data of geological and technical control for optimization of drilling. M: VNIIOENG, 1987, 37 P.
Sinev S. V. Models of drilling process. Oil and gas business, 2009. http://www.ogbus.ru
Fedorov B. V., Huzina A. B., Ratov B. T., Sharauova A. B. Modeling of process of deepening of wells PDC chisels. Oil and gas, No. 4 (100), 2017., p. 77-85, Almaty.
N. D. Mikhailova Technical design of core drilling M: Nedra, 1995, 197 P.
E. G. Leonov, V. I. Isaev, Hydro-aeromechanics in drilling. M: Nedra, 1987, p. 123-125.