American Journal of Engineering and Technology Management

| Peer-Reviewed |

Comprehensive Research on Development of the New Blade Bits Design

Received: 08 January 2020    Accepted: 31 January 2020    Published: 20 February 2020
Views:       Downloads:

Share This Article

Abstract

This article presents data on the development of the peak-shaped blade bit with an increased productivity, resistance and reduced energy capacity used at drilling wells in soft rocks and partially in rocks of medium hardness. In order to achieve this goal a comprehensive research with the theoretical, design and development and experimental works were carried out. It is shown that the distribution of the axial load on the radial cutters of the bit is uneven, which is a reason for such complication as the "hanging" of the bit over the bottom of the well. As a result of the research works, the peak-shaped blade bit was developed and patented, which increases drilling productivity by 24%.

DOI 10.11648/j.ajetm.20200501.12
Published in American Journal of Engineering and Technology Management (Volume 5, Issue 1, February 2020)
Page(s) 12-17
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Blade Bit, Peak-shaped Blade Bit, Core Destruction, Soft Rocks, Removal of Cutters, Drilling Mud, Core Breaker

References
[1] Rakishev B. R., Fedorov B. V. Technique and technology of the construction of geotechnological wells. Almaty, KazNTU, 2013, 355с.
[2] Sushko S. M., Kasenov A. K., Musanov A. M., Begun A. D. Drilling and equipment of the geotechnological wells. Almaty, KazNTU, 2010, 483 P.
[3] Dick Gismin. Technological support for the improvement of drill bits. Offshore (Russia), №1 (1) September 2013, pp. 42-45.
[4] Balaba V. I., Bekbulatov I. K., Vyshegorodtseva G. I. and others. Drilling rock destroying tool. M: Gubkin RSU Oil and Gas, 2013, 245 P.
[5] Abaturov V. G. Physical-mechanical properties of rocks and drilling rock destroying tool. Tyumen: Publ. Oil and Gas University, 2008, 238 С.
[6] Gandjumyan R. A., Kalinin A. G., Serdyuk N. I. Calculations in drilling. Handbook. M: RGGRU, 2007, 664 P.
[7] Fedorov B. V., Huzina L. B., Ratov B. T., Sharauova A. B. Modeling of process of deepening wells with RDS bits. Almaty. Oil and Gas, 2017, N. 4. P. 77-85.
[8] Popov A. N., Spivak A. I., Akbulatov T. O. and others. The technology of drilling oil and gas wells. M: Nedra, 2004, 509 P.
[9] Biletskiy M. T., Ratov B. T., Baiboz A. R. The use of computer user programs for the analysis of theoretical models of rock destruction during drilling. Science News of Kazakhstan, N. 3, 2018, p. 80-93.
[10] Afanasiev I. S., Ponomarev P. P. and others. Guide to drilling exploration wells. L: VITR, 2000, 580 С.
[11] Biletskiy M. T., Ratov B. T., Bayboz A. R. Patent for the invention of the Republic of Kazakhstan. № 33077 (104033). Drill bit type peak-shaped. 10.09.2018, Bull. № 34.
[12] Bashkatov D. N. Optimization of drilling process. N. Novgorod, Rosburmash, 2006. 33 P.
Author Information
  • Department of Geology and Oil & Gas, Satpaev University, Almaty, Kazakhstan

  • Limited Liability Partnership “Burmash”, Almaty, Kazakhstan

  • Institute of Geology and Oil & Gas, Caspian University, Almaty, Kazakhstan

  • Department of Geology and Oil & Gas, Satpaev University, Almaty, Kazakhstan

Cite This Article
  • APA Style

    Boris Vladimirovich Fedorov, Gulzhan Abdullaevna Kudaikulova, Boranbay Tovbasarovich Ratov, Akniyet Rabbimuly Bayboz. (2020). Comprehensive Research on Development of the New Blade Bits Design. American Journal of Engineering and Technology Management, 5(1), 12-17. https://doi.org/10.11648/j.ajetm.20200501.12

    Copy | Download

    ACS Style

    Boris Vladimirovich Fedorov; Gulzhan Abdullaevna Kudaikulova; Boranbay Tovbasarovich Ratov; Akniyet Rabbimuly Bayboz. Comprehensive Research on Development of the New Blade Bits Design. Am. J. Eng. Technol. Manag. 2020, 5(1), 12-17. doi: 10.11648/j.ajetm.20200501.12

    Copy | Download

    AMA Style

    Boris Vladimirovich Fedorov, Gulzhan Abdullaevna Kudaikulova, Boranbay Tovbasarovich Ratov, Akniyet Rabbimuly Bayboz. Comprehensive Research on Development of the New Blade Bits Design. Am J Eng Technol Manag. 2020;5(1):12-17. doi: 10.11648/j.ajetm.20200501.12

    Copy | Download

  • @article{10.11648/j.ajetm.20200501.12,
      author = {Boris Vladimirovich Fedorov and Gulzhan Abdullaevna Kudaikulova and Boranbay Tovbasarovich Ratov and Akniyet Rabbimuly Bayboz},
      title = {Comprehensive Research on Development of the New Blade Bits Design},
      journal = {American Journal of Engineering and Technology Management},
      volume = {5},
      number = {1},
      pages = {12-17},
      doi = {10.11648/j.ajetm.20200501.12},
      url = {https://doi.org/10.11648/j.ajetm.20200501.12},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ajetm.20200501.12},
      abstract = {This article presents data on the development of the peak-shaped blade bit with an increased productivity, resistance and reduced energy capacity used at drilling wells in soft rocks and partially in rocks of medium hardness. In order to achieve this goal a comprehensive research with the theoretical, design and development and experimental works were carried out. It is shown that the distribution of the axial load on the radial cutters of the bit is uneven, which is a reason for such complication as the "hanging" of the bit over the bottom of the well. As a result of the research works, the peak-shaped blade bit was developed and patented, which increases drilling productivity by 24%.},
     year = {2020}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Comprehensive Research on Development of the New Blade Bits Design
    AU  - Boris Vladimirovich Fedorov
    AU  - Gulzhan Abdullaevna Kudaikulova
    AU  - Boranbay Tovbasarovich Ratov
    AU  - Akniyet Rabbimuly Bayboz
    Y1  - 2020/02/20
    PY  - 2020
    N1  - https://doi.org/10.11648/j.ajetm.20200501.12
    DO  - 10.11648/j.ajetm.20200501.12
    T2  - American Journal of Engineering and Technology Management
    JF  - American Journal of Engineering and Technology Management
    JO  - American Journal of Engineering and Technology Management
    SP  - 12
    EP  - 17
    PB  - Science Publishing Group
    SN  - 2575-1441
    UR  - https://doi.org/10.11648/j.ajetm.20200501.12
    AB  - This article presents data on the development of the peak-shaped blade bit with an increased productivity, resistance and reduced energy capacity used at drilling wells in soft rocks and partially in rocks of medium hardness. In order to achieve this goal a comprehensive research with the theoretical, design and development and experimental works were carried out. It is shown that the distribution of the axial load on the radial cutters of the bit is uneven, which is a reason for such complication as the "hanging" of the bit over the bottom of the well. As a result of the research works, the peak-shaped blade bit was developed and patented, which increases drilling productivity by 24%.
    VL  - 5
    IS  - 1
    ER  - 

    Copy | Download

  • Sections