Volume 7, Issue 2, June 2019, Pages: 27-29
Received: Aug. 7, 2019;
Accepted: Aug. 29, 2019;
Published: Sep. 17, 2019
Views 73 Downloads 13
Li Ning, Yunnan Phosphate Chemical Group Co., Ltd., Kunming, China
Density is an inherent property of matter, which plays a very important role in production and life. There are many and relatively simple methods to measure the density of large particulate matter. But the density measurement of fine-grained solid materials is difficult because of the volume measurement. Existing methods require expensive and complex equipment. In order to measure the density of fine solids in a simple, convenient, accurate and rapid manner, This paper uses water to fill the gap between the particles of materials, and then through the conversion of water mass and volume, so as to calculate the volume of materials, so as to calculate the density of fine-grained materials. This paper takes fine-grained phosphate ore as an example to demonstrate the application method of this study. The density of phosphate ore measured by this method is 2.84g/cm³ cubed, which is consistent with the theory. Steel ball and copper chip are also used for verification, and the calculated density is close to the theoretical density, which verifies the accuracy and reliability of this method. Through research and demonstration, this method can make it easy, fast and accurate to measure the density of fine solids, save time and investment, and improve efficiency and efficiency.
A Method for Measuring the Density of Fine - Grained Solids, Modern Chemistry.
Vol. 7, No. 2,
2019, pp. 27-29.
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/
) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
She Shu-qun. “Study on determination of gold in decoration by x-ray fluorescence with density correction”. Geological Exploration For Non-ferrous Metals, vol. 7, no. 3, pp. 182-185, 1998.
Zhang Xun-biao. “Wonderful density gold method”. Shanghai Metrology and Testing, no. 6, pp. 41-42, 1995.
Zhang Ling. “Several common ways to measure density in mid-test questions”. Mathematical Learning (Junior Edition), vol. 25, no. 9, pp. 48-50, 2018.
Li Yin-lun. “Testing the Density of Substance with Jouly Steelyard”. Journal of Qinghai Junior Teachers' College (Natural Science Edition), no. 3, pp. 43-44, 2000.
He Sheng-jing. “Physical experiment manual”. Beijing: Machinery Industry Press, 1989.
Wang Yun-cai. “University physics experiment course”. Beijing: Science Press. 2008.
He Sheng-jing, Wang Xing-nai. “Physical experimental dictionary”. Beijing: Science and General Press, 1991.
Huang Tian-ming. “Hydrostatic measurement of solid density by cubic weighing method”. Physical Bulletin, no. 3, pp. 34-35, 1998.
Li Yan-hong. “Inspection and use of density bottle”. Beer Technology, no. 9, pp. 42-44, 2006.
Qi Jian-jun, Xiao Hua. “Two special methods for measuring the density of matter”. Physical Bulletin, no. 5, pp. 37-37, 2003.
Wu Hao-rang. “Systematic error analysis and correction of density measurement of objects by static equilibrium method”. Jurnal of zhang jia kou teachers college, vol. 19, no. 6, pp. 55-56, 2003.
Yin Xiang-nan, Wang Chang-an, Wang Wei-zhi, etc. “Application of automatic true density analyzer in determination of cement density”. Cement, 2019 (supplement): 145-147.
Wang Yue. “Analysis of influencing factors of cement density inspection”. China cement, no. 3, pp. 89-90, 2019.
Zhang Hong-yun, Yang Yong-liang, Meng bo. “Design of one-step method for measuring material density”. Physical Bulletin, no. 4, pp. 82-84, 2016.
Ren Li, Li Guang-yong, Wang xun, etc. “Application of Water Density Correction Method to Converse Formation Pressure in Water Injection Well”. Oil and gas well testing, vol. 21, no. 3, pp. 24-25, 2012.