International Journal of Materials Science and Applications

| Peer-Reviewed |

Controllable Synthesis and Catalytic Property of Novel Copper Oxides (CuO and Cu2O) Nanostructures

Received: 26 January 2016    Accepted:     Published: 27 January 2016
Views:       Downloads:

Share This Article

Abstract

Copper oxides (CuO and Cu2O) semiconductor micro- and nanostructures have been selectively synthesized using cupric nitrate trihydrate (Cu(NO3)2•3H2O), potassium biphthalate (KHC8H4O4) and sodium hydroxide (NaOH) as starting materials in water solution by a simple hydrothermal method. The phase and morphology of the products could be controlled by changing the amount of sodium hydroxide and sodium potassium biphthalate. X-ray diffraction (XRD), field scanning electron microscopy (SEM) and Raman spectra (Raman) were used to characterize the products. It was found that oval-shaped CuO, CuO nanoplates and octahedral Cu2O were prepared by adjusting the molar of the NaOH and KH C8H4O4, meaning that NaOH and KH C8H4O4 played an important role in the morphology and phase of the samples. The catalytic application in accelerating catalytic decomposition of ammonium perchlorate (AP) of the as-prepared samples was also investigated by means of differential scanning calorimetry (DSC). Compared with CuO (oval-shaped or plates), octahedral Cu2O exhibited better catalysis on thermal decomposition of AP. The present work can afford some guidance for the rationally controllable synthesis of other catalytic materials.

DOI 10.11648/j.ijmsa.20160501.13
Published in International Journal of Materials Science and Applications (Volume 5, Issue 1, January 2016)
Page(s) 18-22
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Electron Microscopy, Raman, Catalytic, Copper Oxides

References
[1] L. Ma, K. E. Hendrickson, S. Y. Wei and L. A. Archer, “Nanomaterials: Science and applications in the lithium–sulfur battery,” Nano Today, 2015, 10. 315-38.
[2] Z. Hens and R.K. Čapek, “Size tuning at full yield in the synthesis of colloidal semiconductor nanocrystals, reaction simulations and experimental verification,” Coord. Chem. Rev., 2014, 263. 217-28.
[3] J.S. Lee and J. Jang, “Hetero-structured semiconductor nanomaterials for photocatalytic applications,” J. Ind. Eng. Chem., 2014, 20. 363-71.
[4] N.M. Makwana, C.J. Tighe, R.I. Gruar, P. F. McMillan and J.A. Darr, “Pilot plant scale continuous hydrothermal synthesis of nano-titania; effect of size on photocatalytic activity,” Mater. Sci. Semicond. Process. 2016, 42. 131-37.
[5] M.K. Sinha, S.K. Sahu, P. Meshram, L.B. Prasad and B.D. Pandey, “Low temperature hydrothermal synthesis and characterization of iron oxide powders of diverse morphologies from spent pickle liquor,” Powder Technol., 2015, 276. 214-21.
[6] Y.B. Kim and M.W. Shin, “Synthesis of diverse structured vanadium pentoxides particles by the simplified hydrothermal method,” Mater. Lett., 2014, 132. 247-50.
[7] M. Z. Iqbal, F.P. Wang, Rafi-ud-din, Q. Javed, M.Y. Rafique, Y. Li and P.F. Li, “Preparation, characterization and optical properties of tin monoxide micro-nano structure via hydrothermal synthesis,” Mater. Lett., 2012, 68. 409-12.
[8] J.Z. Yin, Z.H. Sheng, W.G. Zhang, Y. Zhang, H. Zhong, R.Q. Li, Z.J. Jiang and X.F. Wang, “Synthesis and catalytic properties of novel peanut shaped CuO hollow architectures,” Mater Lett 2014, 131. 317–20.
[9] C. Yang, F. Xiao, J.D. Wang and X.T. Su, “3D flower- and 2D sheet-like CuO nanostructures: Microwave-assisted synthesis and application in gas sensors,” Sens Actuat B 2015, 207. 177–185.
[10] S. Harish, M. Navaneethan, J. Archana, S. Ponnusamy, C. Muthamizhchelvan and Y. Hayakawa, “Chemical synthesis and properties of spindle-like CuO nanostructures with porous nature,” Mater Lett 2015, 139. 59–62.
[11] Y.F. Yuan, Y.B. Pei, J. Fang, H.L. Zhu, J.L. Yang and S.Y. Guo, “Sponge-like mesoporous CuO ribbon clusters as high-performance anode materials for lithium-ion batteries,” Mater Lett 2013, 91. 279–82.
[12] B.G. Ganga and P.N. Santhosh, “Manipulating aggregation of CuO nanoparticles: correlation between morphology and optical properties,” J Alloys Comp 2014, 612. 456-64.
[13] M.A. Bhosale, K.D. Bhatte and B.M. Bhanage, “A rapid, one pot microwave assisted synthesis of nanosize cuprous oxide,” Powder Technol 2013, 235. 516-19.
[14] C-H. Kuo and M.H. Huang, “Morphologically controlled synthesis of Cu2O nanocrystals and their properties,” Nano Today 2010, 5. 106-16.
[15] K. Mageshwari and R. Sathyamoorthy, “Flower-haped CuO nanostructures: synthesis, characterization and antimicrobial activity,” J Mater Sci Technol 2013, 29. 909-14.
[16] M. Rabbani, R. Rahimi, M. Bozorgpour, J. Shokraiyan and S.S. Moghaddam, “Photocatalytic application of hollow CuO microspheres with hierarchical dandelion-like structures synthesized by a simple template free approach,” Mater Lett 2014, 119. 39–42.
[17] D.P. Volanti, M.O. Orlandi, J. Andres and E. Longo, “Efficient microwave-assisted htdrothermal synthesis of CuO sea urchin-like architecture via a mesoscale self-assembly,” Cryst Eng Comm 2010, 12. 1696–9.
[18] P. Uthirakumar, S. Muthulingam, R. Khan, J.H. Yun, H-S. Cho and I-H. Lee, “Surfactant-free synthesis of leaf-like hierarchical CuO nanosheets as a UV light filter,” Mater Lett, 2015, 156. 191–4.
[19] J.F. Pei, F.Q. Zhao, X.D. Song, X.N. Ren, H.X. Gao, T. An, J. An and R.Z. Hu, “Effects of nano-CuO particles on thermal decomposition behavior and decomposition mechanism of BAMO-GAP copolymer,” J. Anal. Appl. Pyrolysis 2015, 112. 88-93.
[20] J.K. Sharma, P. Srivastava, G. Singh, M.S. Akhtar and S. Ameen, “Catalytic thermal decomposition of ammonium perchlorate and combustion of composite solid propellants over green synthesized CuO nanoparticles”.
[21] S.G. Hosseini and R. Abazari, “A facile one-step route for production of CuO, NiO and CuO-NiO nanoparticles and comparison of their catalytic activity for ammonium perchlorate decomposition,” RSC Adv 2015, 5. 96777-84.
[22] V.V. Boldirev, “Thermal decomposition of ammonium perchlorate,” Thermochim Acta 2006, 443. 1-36.
[23] W.Y. Yin, X. Chen, M.H. Cao, C.W. Hu and B.Q. Wei, “α-Fe2O3 nanocrystals: controllable SSA-Assisted hydrothermal synthesis, growth mechanism, and magnetic properties,” J. Phys. Chem. C 2009, 113. 15897–903.
[24] H. Solache-Carranco, G. Juárez-Díaz, A. Esparza-García, M. Briseño-García, M. Galván-Arellano, J. Martínez-Juárez, G. Romero-Paredes and R. Peña-Sierra, “Photoluminescence and X-ray diffraction studies on Cu2O,” J Lumin 2009, 129. 1483-7.
[25] M.C. Huang, T.H. Wang, W.S. Chang, J.C. Lin, C.C. Wu, I.C. Chen, K. C. Peng and S.W. Lee, “Temperature dependence on p-Cu2O thin film electrochemically deposited onto copper substrat,” Appl Surf Sci 2014, 301. 369-77.
[26] M.A. Dar, Y.S. Kim, W.B. Kim, J.M. Sohn and H.S. Shin, “Structural and magnetic properties of CuO nanoneedles synthesized by hydrothermal method,” Appl Surf Sci 2008, 254. 7477–81.
[27] C.L. Wang, H.B. Zhang, Y.H. Ye, R.Q. She, and Y. Hu, “Effect of nanostructured foamed porous copper on the thermal decomposition of ammonium perchlorate,” Thermochim Acta 2013, 568. 161-4.
Author Information
  • Testing Center, Yangzhou University, Yangzhou City, Jiangsu, China

  • School of Chemistry Engineering, Nanjing University of Science & Technology, Nanjing, Jiangsu, China

  • Testing Center, Yangzhou University, Yangzhou City, Jiangsu, China

Cite This Article
  • APA Style

    Wenxian Wei, Bin Xu, Qingli Huang. (2016). Controllable Synthesis and Catalytic Property of Novel Copper Oxides (CuO and Cu2O) Nanostructures. International Journal of Materials Science and Applications, 5(1), 18-22. https://doi.org/10.11648/j.ijmsa.20160501.13

    Copy | Download

    ACS Style

    Wenxian Wei; Bin Xu; Qingli Huang. Controllable Synthesis and Catalytic Property of Novel Copper Oxides (CuO and Cu2O) Nanostructures. Int. J. Mater. Sci. Appl. 2016, 5(1), 18-22. doi: 10.11648/j.ijmsa.20160501.13

    Copy | Download

    AMA Style

    Wenxian Wei, Bin Xu, Qingli Huang. Controllable Synthesis and Catalytic Property of Novel Copper Oxides (CuO and Cu2O) Nanostructures. Int J Mater Sci Appl. 2016;5(1):18-22. doi: 10.11648/j.ijmsa.20160501.13

    Copy | Download

  • @article{10.11648/j.ijmsa.20160501.13,
      author = {Wenxian Wei and Bin Xu and Qingli Huang},
      title = {Controllable Synthesis and Catalytic Property of Novel Copper Oxides (CuO and Cu2O) Nanostructures},
      journal = {International Journal of Materials Science and Applications},
      volume = {5},
      number = {1},
      pages = {18-22},
      doi = {10.11648/j.ijmsa.20160501.13},
      url = {https://doi.org/10.11648/j.ijmsa.20160501.13},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ijmsa.20160501.13},
      abstract = {Copper oxides (CuO and Cu2O) semiconductor micro- and nanostructures have been selectively synthesized using cupric nitrate trihydrate (Cu(NO3)2•3H2O), potassium biphthalate (KHC8H4O4) and sodium hydroxide (NaOH) as starting materials in water solution by a simple hydrothermal method. The phase and morphology of the products could be controlled by changing the amount of sodium hydroxide and sodium potassium biphthalate. X-ray diffraction (XRD), field scanning electron microscopy (SEM) and Raman spectra (Raman) were used to characterize the products. It was found that oval-shaped CuO, CuO nanoplates and octahedral Cu2O were prepared by adjusting the molar of the NaOH and KH C8H4O4, meaning that NaOH and KH C8H4O4 played an important role in the morphology and phase of the samples. The catalytic application in accelerating catalytic decomposition of ammonium perchlorate (AP) of the as-prepared samples was also investigated by means of differential scanning calorimetry (DSC). Compared with CuO (oval-shaped or plates), octahedral Cu2O exhibited better catalysis on thermal decomposition of AP. The present work can afford some guidance for the rationally controllable synthesis of other catalytic materials.},
     year = {2016}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Controllable Synthesis and Catalytic Property of Novel Copper Oxides (CuO and Cu2O) Nanostructures
    AU  - Wenxian Wei
    AU  - Bin Xu
    AU  - Qingli Huang
    Y1  - 2016/01/27
    PY  - 2016
    N1  - https://doi.org/10.11648/j.ijmsa.20160501.13
    DO  - 10.11648/j.ijmsa.20160501.13
    T2  - International Journal of Materials Science and Applications
    JF  - International Journal of Materials Science and Applications
    JO  - International Journal of Materials Science and Applications
    SP  - 18
    EP  - 22
    PB  - Science Publishing Group
    SN  - 2327-2643
    UR  - https://doi.org/10.11648/j.ijmsa.20160501.13
    AB  - Copper oxides (CuO and Cu2O) semiconductor micro- and nanostructures have been selectively synthesized using cupric nitrate trihydrate (Cu(NO3)2•3H2O), potassium biphthalate (KHC8H4O4) and sodium hydroxide (NaOH) as starting materials in water solution by a simple hydrothermal method. The phase and morphology of the products could be controlled by changing the amount of sodium hydroxide and sodium potassium biphthalate. X-ray diffraction (XRD), field scanning electron microscopy (SEM) and Raman spectra (Raman) were used to characterize the products. It was found that oval-shaped CuO, CuO nanoplates and octahedral Cu2O were prepared by adjusting the molar of the NaOH and KH C8H4O4, meaning that NaOH and KH C8H4O4 played an important role in the morphology and phase of the samples. The catalytic application in accelerating catalytic decomposition of ammonium perchlorate (AP) of the as-prepared samples was also investigated by means of differential scanning calorimetry (DSC). Compared with CuO (oval-shaped or plates), octahedral Cu2O exhibited better catalysis on thermal decomposition of AP. The present work can afford some guidance for the rationally controllable synthesis of other catalytic materials.
    VL  - 5
    IS  - 1
    ER  - 

    Copy | Download

  • Sections