Effect of Association Natural-Recycling Aggregates (Crushed Glass and Waste Tire) on Mechanical Properties of the Concrete
International Journal of Materials Science and Applications
Volume 6, Issue 1, January 2017, Pages: 28-31
Received: Oct. 31, 2016;
Accepted: Nov. 11, 2016;
Published: Jan. 12, 2017
Views 3513 Downloads 149
Mamery Adama Serifou, Department of Earth Sciences and Mineral Resource, Geomaterial Laboratory, Université Félix Houphouët Boigny, Abidjan, Côte d’Ivoire
Olivier Moro Boffoué, Department of Earth Sciences and Mineral Resource, Geomaterial Laboratory, Université Félix Houphouët Boigny, Abidjan, Côte d’Ivoire
Paul Sery Obre Jolissaint, Department of Earth Sciences and Mineral Resource, Geomaterial Laboratory, Université Félix Houphouët Boigny, Abidjan, Côte d’Ivoire
Clement Koffi Kouadio, Department of Earth Sciences and Mineral Resource, Geomaterial Laboratory, Université Félix Houphouët Boigny, Abidjan, Côte d’Ivoire
Edjikémé Emeruwa, Department of Earth Sciences and Mineral Resource, Geomaterial Laboratory, Université Félix Houphouët Boigny, Abidjan, Côte d’Ivoire
This study relates to the use of the industrial waste as substitute to the natural aggregates. It relates to two types of waste: Crushed glass and waste tires. These wastes were incorporated into concrete for a partial substitution of the aggregates in the proportions of 5%, 10%, 15%, 20%, 25% and 30% for the same matrix (mortar). The compressive strength and the mode of rupture are compared. The results show a decrease of compressive strength when the proportion of waste increases. Moreover, the compressive strength of concrete of used tire is lower than that of the concrete of crushed glass. Variation of the mode of rupture between these two types of concrete was also observed.
Mamery Adama Serifou,
Olivier Moro Boffoué,
Paul Sery Obre Jolissaint,
Clement Koffi Kouadio,
Effect of Association Natural-Recycling Aggregates (Crushed Glass and Waste Tire) on Mechanical Properties of the Concrete, International Journal of Materials Science and Applications.
Vol. 6, No. 1,
2017, pp. 28-31.
Rachida I., Martin C., Arezki T (2010). Etude des propriétés des bétons de verre. Technologie valorisation Vol. 16 N°5/6, pp 70-77.
Jin C., Meyer C. et Baxter S. (2000). “Glasscrete”-Concrete with glass aggregate, American concrete institute, Material Journal, n°97, pp.208-213.
Yamada, K. et Ishiyama, S (2005). Maximum dosage of glass cullet as fine aggregate in mortar, dans Dhir, R. K. Newlands, Dyer, T. D. (2005) Achieving Sustainability in Construction, Proceedings of the International Conference Held at the University of Dundee, Scotland, UK on 5-7 July.
Meyer, C., Baxter, S. et Jin, W (1996). Alkali-silica reaction in concrete with waste glass as aggregate, Materials for a New Millennium, Proceedings of ASCE Materials Engineering Conference, Washington,, pp. 1388–1394. Cité dans [Rachida et al, 10].
Lee G., Ling T. C., Wong Y. L., Poon C. S. (2011). Effects of crushed glass cullet sizes, casting methods and pozzolanic materials on ASR of concrete blocks. Construction and Building Materials, 25, pp 2611-2618.
Topçu I., Boga A. et Bilir T. (2008). Alkali–silica reactions of mortars produced by using waste glass as fine aggregate and admixtures such as fly ash and Li2CO3. Waste Manage;28 (5), pp 84–878.
Tung-Chai L., Chi-Sun P., et Shi-Cong K. (2011). Influence of recycled glass content and curing conditions on the properties of self-compacting concrete after exposure to elevated temperatures. Cement & Concrete Composites, 18 p.
Kou S-C. et Poon C-S. (2009). Properties of self-compacting concrete prepared with recycled glass aggregate. Cem Concr Compos 31 (2), pp 103–107.
Polley C., Cramer S. M. et Rodolfo V (1998). Potential for using waste glass in Portland cement concrete, Journal of Materials in Civil Engineering, vol. 10, n° 4, pp 210-219.
Topçu I. B. et Mehmet C (2004). Properties of concrete containing waste glass. Cement and Concrete Research 34, pp 267–274.
Batayneh, Malek K., Marie, Iqbal, and Asi, Ibrahim (2008). Promoting the use of crumb rubber concrete in developing countries - Waste Management - Vol. 28 - Numéro 11 - pp. 2171-2176.
Khaloo, Ali R., Dehestani, M., and Rahmatabadi, P. (2008). Mechanical properties of concrete containing a high volume of tire-rubber particles - Waste Management - Vol. 28 - Numéro 12- pp. 2472-2482.
Li, Guoqiang, Garrick, Gregory, Eggers, John, Abadie, Christopher (2004). Stubblefield, Michael A., and Pang, Su Seng - Waste tire fiber modified concrete- Composites Part B: Engineering - Vol. 35 - Numéro 4 - pp. 305-312.
Bravo, Miguel and de Brito, Jorge (2012). Concrete made with used tyre aggregate: durability-related performance - Journal of Cleaner Production - Vol. 25 - Numéro 0- pp. 42-50.
Fattuhi, N. I. and Clark, L. A. (1996). Cement-based materials containing shredded scrap truck tyre rubber - Construction and Building Materials - Vol. 10 - Numéro 4 - pp. 229-236.
Ganijian, Eshmaiel, Khorami, Morteza, and Maghsoudi, Ali Akbar (2009). Scrap-tyre-rubber replacement for aggregate and filler in concrete - Construction and Building Materials - Vol. 23 - Numéro 5- pp. 1828-1836.
Toutanji H. A (1996). The use of rubber tire particles in concrete to replace mineral aggregates - Cement and Concrete Composites - Vol. 18 - Numéro 2 - pp. 135-139.
Eldin N. N., et Senouci A. B. (1993). "Rubber tire particules as concrete aggregate". Journal of Materiel in civil Engineering, vol.5, No4, pp.478-496.
Fedroff D., Ahmad S., and Savas B. Z. (1996) Mechanical properties of concrete with ground waste tire rubber. Transportation Research Board, No. 1532, pp.66-72.
Oikonomou N. et Mavridou S. (2009). Improvement of chloride ion penetration resistance in cement mortars modified with rubber from worn automobile tires. Cement & Concrete Composites, 40 p.