A Review on Surface Modification of Bast Fibre as Reinforcement in Polymer Composites

Sandeep Kumar; Krishan Kant Singh Mer; Lalta Prasad; Vinay Kumar Patel

doi:doi:10.11648/j.ijmsa.20170602.12

| Peer-Reviewed

A Review on Surface Modification of Bast Fibre as Reinforcement in Polymer Composites

Sandeep Kumar, Krishan Kant Singh Mer, Lalta Prasad, Vinay Kumar Patel

Published in International Journal of Materials Science and Applications (Volume 6, Issue 2)

Received: 18 November 2016 Accepted: 17 December 2016 Published: 3 February 2017

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

In the past few decades, natural fibres have shown remarkable achievements in the field of reinforced polymer composites because of environmental issues and petroleum crises. Biodegradable fibres (bast, animals hair, stalk, seed etc.) has been used by researchers because of its low cost, low density, abundant in nature, high stiffness etc. over other man-made fibers. The majority of plant fibers which are being considered as reinforcement materials for polymer composites are bast fibers (the outer cell layers of various plants) such as hemp, jute, kenaf, grewia optiva etc. Among these fibers Grewia optiva is recently explored fiber and is presently being assessed as reinforcement in polymeric composites. In this paper, we have discussed and reviewed the extraction process of Grewia optiva fibers and various surface treatments such as graft copolymerization, mercerization, Benzoylation and silane methods for enhancement of the surface adhesion properties of Grewia optiva fibres with their matrice and the effects of these surface treatments on mechanical properties of such fabricated composites.

Published in	International Journal of Materials Science and Applications (Volume 6, Issue 2)
DOI	10.11648/j.ijmsa.20170602.12
Page(s)	77-82
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Natural Fiber, Grewia Optiva, Fiber Extraction, Surface Modification

References

[1]	D. Hull and T. W Clyne, “An introduction to composite materials”, Cambridge University Press, Cambridge, 1996.
[2]	A. K. Bledzki, S. Reinhmane, and J. Gassan, “Thermoplastics reinforced with wood ﬁllers”, Polymer Plastic Technology and Engineering, Vol. 37, pp. 451-468, 1998.
[3]	K. K. Chawla, “Composite Materials Science and Engineering”, Springer-Verlag, New York.
[4]	R. Sinha, “Outlines of Polymer Technology”, Prentice-Hall by India private Limited, New Delhi–10001, 2000.
[5]	C. A. Farnfield, P. J. Alvery. “Textile Term and Definition.” (editors 7th ed Manchester, ISBN, 0-900739-17-7).
[6]	A. Atiqah, M. A. Maleque, M. Jawaid, M. Iqbal, “Development of kenaf-glass reinforced unsaturated polyester hybrid composite for structural applications”, Composites: Part B vol. 56, pp 68–73, 2014.
[7]	M. Boopalan, M. Niranjanaa, M. J. Umapathy, “Study on the mechanical properties and thermal properties of jute and banana fiber reinforced epoxy hybrid composites”, Composites: Part B vol. 51, pp. 54–57, 2013.
[8]	V. Mishra, S. Biswas, “Physical and Mechanical Properties of Bi-directional Jute Fiber epoxy Composites”, Procedia Engineering, Vol. 51, pp. 561–566, 2013.
[9]	M. Baiardo, E. Zini, M. Scandola, “Flax fibre–polyester composites”, Composites: Part A vol. 35, pp. 703–710, 2004.
[10]	S. S. Bisht, S. K. Buchar, B. P. Kothyri, “Traditional Skill of Resource Utilization”, IJTK, vol.5(3), pp. 403-406, 2006.
[11]	Y. khatibi, A. Lawcock, and Y-W Mai, “Fibre/Matrix Adhesion and Residual Strength of Nitched Composite Laminates”, ECCM, vol. 8, pp. 3-6, 1998.
[12]	A. K. Bledzki and J. Gassan, “Natural fiber Reinforced Plastics", in Handbook of Engineering Polymeric Materials, N. P. Cheremisinoff (ed.), Marcel Dekker, Inc., New York, 1997.
[13]	N. Chand and P. K. Rohatgi, “Adhesion of Sisal Fibre-Polyester System”, Polymer Communications, vol. 27, pp. 157–160, 1986.
[14]	G. Kalaprasad, B. Francis, C. Radhesh, C. Pavithran, G. Groeninckx, & S. Thomas, “Effect of fibre length and chemical modifications on the tensile properties of intimately mixed short sisal/glass hybrid fibre reinforced low density polyethylene composites", Polymer International, vol. 53(11), pp. 1624-1638, 2004.
[15]	L. Xue, G. T. Lope & P. Satyanarayan, 2007. “Chemical treatment of natural fibre for use in natural fibre-reinforced composites: A review”, Polymer Environment, vol. 15(1), pp. 25-33, 2007.
[16]	J. M. P. Felix, Gatenholm and H. P. Schreiber, “Controlled Interactions in Cellulose-polymer Composites”, Polymer Composites, vol.14, pp. 449, 1993.
[17]	A. S. Singha, & V. K. Thakur, “Green Polymer Materials”, LLC USA: Studium Press. ISBN:1933699892, 2012.
[18]	A. S. Singha, A. K Rana, “Effect of Aminopropyltriethoxy- silane (APS) treatment on properties of mercerized lignocellulosic Grewia optiva fiber”, Journal of Polymers and Environment, 21(1), pp.141-150, 2013.
[19]	A. S. Singha and A. K Rana, “Effect of surface modification of Grewia Optiva fibres on their physico-mechanical and thermal properties”, Bulletin of Materials Science, vol. 35, pp. 7, 2012.
[20]	L. Xue, G. T. Lope & P. Satyanarayan, “Chemical treatment of natural fibre for use in natural fibre-reinforced composites: A review”, Polymer Environment, vol. 15(1), pp. 25-33, 2007.
[21]	S. C. O. Ugbolue, “Textile Progress: Structure/Property Relationship in Textile Fibres”, Journal of the Textile Institute, vol. 20(4), pp. 1, 1990.
[22]	A. K. Bledzki, S. Reihmane, and J. Gassan, “Properties and Modiﬁcation Methods for Vegetable Fibers for Natural Fibre Composites”, Journal of Applied Polymer Science, vol. 59, pp. 1329, 1996.
[23]	J. M. Felix, P. Gaten holm and H. P. Schreiber, “Controlled Interactions in Cellulose-polymer Composites”, Polymer Composites, vol. 14, pp. 449, 1993.
[24]	V. K. Thakur, M. K. Thakur, R. K. Gupta, “Graft Copolymers of Natural fibre for Green Composites”, Carbohydrate Polymer, vol. 104, pp. 87-93, 2014.
[25]	V. K. Thakur, A. S. Singha & M. K. Thakur, “Graft copolymerization of methyl acrylate onto cellulosic biofibers: Synthesis, characterization and applications”, Journal of Polymers and the Environment, vol. 20(1), pp. 164–174, 2011.
[26]	A. S. Singha, V. K. Thakur & B. N. Mishra, “Study of grewia optiva fiber reinforced urea-formaldehyde composites”, Journal of Polymer Materials, vol. 26(1), pp. 81–90, 2009.

Cite This Article

Plain Text BibTeX RIS

APA Style

Sandeep Kumar, Krishan Kant Singh Mer, Lalta Prasad, Vinay Kumar Patel. (2017). A Review on Surface Modification of Bast Fibre as Reinforcement in Polymer Composites. International Journal of Materials Science and Applications, 6(2), 77-82. https://doi.org/10.11648/j.ijmsa.20170602.12

Copy | Download

ACS Style

Sandeep Kumar; Krishan Kant Singh Mer; Lalta Prasad; Vinay Kumar Patel. A Review on Surface Modification of Bast Fibre as Reinforcement in Polymer Composites. Int. J. Mater. Sci. Appl. 2017, 6(2), 77-82. doi: 10.11648/j.ijmsa.20170602.12

Copy | Download

AMA Style

Sandeep Kumar, Krishan Kant Singh Mer, Lalta Prasad, Vinay Kumar Patel. A Review on Surface Modification of Bast Fibre as Reinforcement in Polymer Composites. Int J Mater Sci Appl. 2017;6(2):77-82. doi: 10.11648/j.ijmsa.20170602.12

Copy | Download

@article{10.11648/j.ijmsa.20170602.12,
  author = {Sandeep Kumar and Krishan Kant Singh Mer and Lalta Prasad and Vinay Kumar Patel},
  title = {A Review on Surface Modification of Bast Fibre as Reinforcement in Polymer Composites},
  journal = {International Journal of Materials Science and Applications},
  volume = {6},
  number = {2},
  pages = {77-82},
  doi = {10.11648/j.ijmsa.20170602.12},
  url = {https://doi.org/10.11648/j.ijmsa.20170602.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20170602.12},
  abstract = {In the past few decades, natural fibres have shown remarkable achievements in the field of reinforced polymer composites because of environmental issues and petroleum crises. Biodegradable fibres (bast, animals hair, stalk, seed etc.) has been used by researchers because of its low cost, low density, abundant in nature, high stiffness etc. over other man-made fibers. The majority of plant fibers which are being considered as reinforcement materials for polymer composites are bast fibers (the outer cell layers of various plants) such as hemp, jute, kenaf, grewia optiva etc. Among these fibers Grewia optiva is recently explored fiber and is presently being assessed as reinforcement in polymeric composites. In this paper, we have discussed and reviewed the extraction process of Grewia optiva fibers and various surface treatments such as graft copolymerization, mercerization, Benzoylation and silane methods for enhancement of the surface adhesion properties of Grewia optiva fibres with their matrice and the effects of these surface treatments on mechanical properties of such fabricated composites.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - A Review on Surface Modification of Bast Fibre as Reinforcement in Polymer Composites
AU  - Sandeep Kumar
AU  - Krishan Kant Singh Mer
AU  - Lalta Prasad
AU  - Vinay Kumar Patel
Y1  - 2017/02/03
PY  - 2017
N1  - https://doi.org/10.11648/j.ijmsa.20170602.12
DO  - 10.11648/j.ijmsa.20170602.12
T2  - International Journal of Materials Science and Applications
JF  - International Journal of Materials Science and Applications
JO  - International Journal of Materials Science and Applications
SP  - 77
EP  - 82
PB  - Science Publishing Group
SN  - 2327-2643
UR  - https://doi.org/10.11648/j.ijmsa.20170602.12
AB  - In the past few decades, natural fibres have shown remarkable achievements in the field of reinforced polymer composites because of environmental issues and petroleum crises. Biodegradable fibres (bast, animals hair, stalk, seed etc.) has been used by researchers because of its low cost, low density, abundant in nature, high stiffness etc. over other man-made fibers. The majority of plant fibers which are being considered as reinforcement materials for polymer composites are bast fibers (the outer cell layers of various plants) such as hemp, jute, kenaf, grewia optiva etc. Among these fibers Grewia optiva is recently explored fiber and is presently being assessed as reinforcement in polymeric composites. In this paper, we have discussed and reviewed the extraction process of Grewia optiva fibers and various surface treatments such as graft copolymerization, mercerization, Benzoylation and silane methods for enhancement of the surface adhesion properties of Grewia optiva fibres with their matrice and the effects of these surface treatments on mechanical properties of such fabricated composites.
VL  - 6
IS  - 2
ER  -

Copy | Download

Author Information

Sandeep Kumar

Mechanical Engineering Department, S.O.E.T, H.N.B. Garhwal University Srinagar, Uttarakhand, India
Krishan Kant Singh Mer

Institute of Technology Gopeshwar, Uttarakhand, India
Lalta Prasad

Mechanical Engineering Department, Govind Ballabh Pant Engineering College Pauri Garhwal, Uttarakhand, India
Vinay Kumar Patel

Mechanical Engineering Department, Govind Ballabh Pant Engineering College Pauri Garhwal, Uttarakhand, India

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Sandeep Kumar, Krishan Kant Singh Mer, Lalta Prasad, Vinay Kumar Patel. (2017). A Review on Surface Modification of Bast Fibre as Reinforcement in Polymer Composites. International Journal of Materials Science and Applications, 6(2), 77-82. https://doi.org/10.11648/j.ijmsa.20170602.12

Copy | Download

ACS Style

Sandeep Kumar; Krishan Kant Singh Mer; Lalta Prasad; Vinay Kumar Patel. A Review on Surface Modification of Bast Fibre as Reinforcement in Polymer Composites. Int. J. Mater. Sci. Appl. 2017, 6(2), 77-82. doi: 10.11648/j.ijmsa.20170602.12

Copy | Download

AMA Style

Sandeep Kumar, Krishan Kant Singh Mer, Lalta Prasad, Vinay Kumar Patel. A Review on Surface Modification of Bast Fibre as Reinforcement in Polymer Composites. Int J Mater Sci Appl. 2017;6(2):77-82. doi: 10.11648/j.ijmsa.20170602.12

Copy | Download

@article{10.11648/j.ijmsa.20170602.12,
  author = {Sandeep Kumar and Krishan Kant Singh Mer and Lalta Prasad and Vinay Kumar Patel},
  title = {A Review on Surface Modification of Bast Fibre as Reinforcement in Polymer Composites},
  journal = {International Journal of Materials Science and Applications},
  volume = {6},
  number = {2},
  pages = {77-82},
  doi = {10.11648/j.ijmsa.20170602.12},
  url = {https://doi.org/10.11648/j.ijmsa.20170602.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijmsa.20170602.12},
  abstract = {In the past few decades, natural fibres have shown remarkable achievements in the field of reinforced polymer composites because of environmental issues and petroleum crises. Biodegradable fibres (bast, animals hair, stalk, seed etc.) has been used by researchers because of its low cost, low density, abundant in nature, high stiffness etc. over other man-made fibers. The majority of plant fibers which are being considered as reinforcement materials for polymer composites are bast fibers (the outer cell layers of various plants) such as hemp, jute, kenaf, grewia optiva etc. Among these fibers Grewia optiva is recently explored fiber and is presently being assessed as reinforcement in polymeric composites. In this paper, we have discussed and reviewed the extraction process of Grewia optiva fibers and various surface treatments such as graft copolymerization, mercerization, Benzoylation and silane methods for enhancement of the surface adhesion properties of Grewia optiva fibres with their matrice and the effects of these surface treatments on mechanical properties of such fabricated composites.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - A Review on Surface Modification of Bast Fibre as Reinforcement in Polymer Composites
AU  - Sandeep Kumar
AU  - Krishan Kant Singh Mer
AU  - Lalta Prasad
AU  - Vinay Kumar Patel
Y1  - 2017/02/03
PY  - 2017
N1  - https://doi.org/10.11648/j.ijmsa.20170602.12
DO  - 10.11648/j.ijmsa.20170602.12
T2  - International Journal of Materials Science and Applications
JF  - International Journal of Materials Science and Applications
JO  - International Journal of Materials Science and Applications
SP  - 77
EP  - 82
PB  - Science Publishing Group
SN  - 2327-2643
UR  - https://doi.org/10.11648/j.ijmsa.20170602.12
AB  - In the past few decades, natural fibres have shown remarkable achievements in the field of reinforced polymer composites because of environmental issues and petroleum crises. Biodegradable fibres (bast, animals hair, stalk, seed etc.) has been used by researchers because of its low cost, low density, abundant in nature, high stiffness etc. over other man-made fibers. The majority of plant fibers which are being considered as reinforcement materials for polymer composites are bast fibers (the outer cell layers of various plants) such as hemp, jute, kenaf, grewia optiva etc. Among these fibers Grewia optiva is recently explored fiber and is presently being assessed as reinforcement in polymeric composites. In this paper, we have discussed and reviewed the extraction process of Grewia optiva fibers and various surface treatments such as graft copolymerization, mercerization, Benzoylation and silane methods for enhancement of the surface adhesion properties of Grewia optiva fibres with their matrice and the effects of these surface treatments on mechanical properties of such fabricated composites.
VL  - 6
IS  - 2
ER  -

Copy | Download