International Journal of Materials Science and Applications

| Peer-Reviewed |

Characterization of Cost Effective PbTiO3 Nanofibres by Electrospinning Technique

Received: 21 August 2016    Accepted: 19 September 2016    Published: 12 December 2016
Views:       Downloads:

Share This Article

Abstract

This research aims to synthesize and characterize the PbTiO3 nanofibres by electrospinning technique. PbTiO3 nanofibre was fabricated onto Al-substrate by home-made electrospinning setup. The spinning or running time was set to 20 min. After spinning, subsequent annealing in oxygen and atmospheric ambient was performed at 600°C for 1 h and followed to form the PbTiO3 nanofibres. Surface morphology and fibres quality of PbTiO3 nanofibres were examined by Field Emission Scanning Electron Microscopy (FESEM). From FESEM image, the fibre diameter was measured to be (150-180 nm) with different collector distances. The experimental data resulted from this research showed that the home-made device compiled and growth chemistry was technically simple and easily adaptable.

DOI 10.11648/j.ijmsa.20170601.11
Published in International Journal of Materials Science and Applications (Volume 6, Issue 1, January 2017)
Page(s) 1-5
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

PbTiO3 Nanofibres, Electrospinning Technique, XRD, FESEM

References
[1] Reneker, D. H. and I. Chun, 1996. Nanometre diameter fibers of polymer produced by electrospinning. Nanotechnology, 7: 216-233. DOI: 10.1088/0957-4484/7/3/009.
[2] Li, D. and Y. Xial, 2003. Fabrication of titania nanofibers by electrospinning. Chem. Materials Nanolett., 3: 555-560. DOI: 10.1021/nl034039o.
[3] Diarmid, A.G.M., W.E. Jones Jr., I.D. Norris, J. Gao and A.T. Johnson Jr. et al., 2001. Electrostatically-generated nanofibers of electronic polymers. Synthetic Metals, 119: 27-30. DOI: 10.1016/S0379-6779 (00)00597-X.
[4] Yun, M., N. V. Myung, R. P. Vasquez, C. Lee and E. Menke et al., 2004. Electrochemically grown wires for individually addressable sensor arrays. Nano Lett., 4: 419-422. DOI: 10.1021/nl035069u.
[5] Wnek, G. E., M. E. Carr, D. G. Simpson and G. L. Bowlin, 2003. Electrospinning of nanofiber fibrinogen structures. Nano Lett., 3: 213-216. DOI: 10.1021/nl025866c.
[6] Doshi, J. and D. H. Reneker, 1995. Electrospinning process and applications of electrospun fibers. J. Electrostat., 35: 151-160. DOI: 10.1016/0304-3886 (95)00041-8.
[7] Chun, I., D. H. Reneker, H, Fong, X. Y. Fang and J. Dietzel et al., 1999. Carbon Nanofibers from Polyacrylonitrile and mesophase pitch J. Adv. Mater., 31:36-41. DOI:1070-9789 (199901) 31:1 <36:CNFPAM>2.0.ZU; 2-O.
[8] Jinxian, W., X. Zheng, X. Dong, Z. Qu and G. Liu et al., 2009. Synthesis of LaMnO3 nanofibers via electrospinning. Aplied Phys. Res., 1: 30-36. DOI: 10.5539/apr.v1n2p30.
[9] Fong, H. and D. H. Reneker, 2000. Stucture formation in polymer fibers. Carl Hauser Verlag.
[10] Jukub, H., 2004. Relation between the fibre orientation and filter properties strutex conference Czech.
[11] Huang, Z. M., Y. Z. Zhang, M. Kotaki and S. Ramakrishna, 2003. A review on polymer nanofibers by electrospinning and their applications in nanocomposites. Compos. Sci. Technol., 63: 2223-2253. DOI: 10.1016/S0266-3538 (03)00178-7.
[12] Mainz, M. H., 2000. Proceedings of the 10th Annual International TANDEC Nonwovens Conference, Nov. 7-10, Knoxville TN.
Author Information
  • Department of Physics, Taungoo University, Taungoo, Myanmar

  • Department of Physics, University of Yangon, Yangon, Myanmar

  • Department of Physics, Mandalay University of Distance Education, Mandalay, Myanmar

  • Department of Physics, University of Mandalay, Mandalay, Myanmar

Cite This Article
  • APA Style

    Zin Min Tun, Zin Min Myat, Than Than Win, Yin Maung Maung. (2016). Characterization of Cost Effective PbTiO3 Nanofibres by Electrospinning Technique. International Journal of Materials Science and Applications, 6(1), 1-5. https://doi.org/10.11648/j.ijmsa.20170601.11

    Copy | Download

    ACS Style

    Zin Min Tun; Zin Min Myat; Than Than Win; Yin Maung Maung. Characterization of Cost Effective PbTiO3 Nanofibres by Electrospinning Technique. Int. J. Mater. Sci. Appl. 2016, 6(1), 1-5. doi: 10.11648/j.ijmsa.20170601.11

    Copy | Download

    AMA Style

    Zin Min Tun, Zin Min Myat, Than Than Win, Yin Maung Maung. Characterization of Cost Effective PbTiO3 Nanofibres by Electrospinning Technique. Int J Mater Sci Appl. 2016;6(1):1-5. doi: 10.11648/j.ijmsa.20170601.11

    Copy | Download

  • @article{10.11648/j.ijmsa.20170601.11,
      author = {Zin Min Tun and Zin Min Myat and Than Than Win and Yin Maung Maung},
      title = {Characterization of Cost Effective PbTiO3 Nanofibres by Electrospinning Technique},
      journal = {International Journal of Materials Science and Applications},
      volume = {6},
      number = {1},
      pages = {1-5},
      doi = {10.11648/j.ijmsa.20170601.11},
      url = {https://doi.org/10.11648/j.ijmsa.20170601.11},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ijmsa.20170601.11},
      abstract = {This research aims to synthesize and characterize the PbTiO3 nanofibres by electrospinning technique. PbTiO3 nanofibre was fabricated onto Al-substrate by home-made electrospinning setup. The spinning or running time was set to 20 min. After spinning, subsequent annealing in oxygen and atmospheric ambient was performed at 600°C for 1 h and followed to form the PbTiO3 nanofibres. Surface morphology and fibres quality of PbTiO3 nanofibres were examined by Field Emission Scanning Electron Microscopy (FESEM). From FESEM image, the fibre diameter was measured to be (150-180 nm) with different collector distances. The experimental data resulted from this research showed that the home-made device compiled and growth chemistry was technically simple and easily adaptable.},
     year = {2016}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Characterization of Cost Effective PbTiO3 Nanofibres by Electrospinning Technique
    AU  - Zin Min Tun
    AU  - Zin Min Myat
    AU  - Than Than Win
    AU  - Yin Maung Maung
    Y1  - 2016/12/12
    PY  - 2016
    N1  - https://doi.org/10.11648/j.ijmsa.20170601.11
    DO  - 10.11648/j.ijmsa.20170601.11
    T2  - International Journal of Materials Science and Applications
    JF  - International Journal of Materials Science and Applications
    JO  - International Journal of Materials Science and Applications
    SP  - 1
    EP  - 5
    PB  - Science Publishing Group
    SN  - 2327-2643
    UR  - https://doi.org/10.11648/j.ijmsa.20170601.11
    AB  - This research aims to synthesize and characterize the PbTiO3 nanofibres by electrospinning technique. PbTiO3 nanofibre was fabricated onto Al-substrate by home-made electrospinning setup. The spinning or running time was set to 20 min. After spinning, subsequent annealing in oxygen and atmospheric ambient was performed at 600°C for 1 h and followed to form the PbTiO3 nanofibres. Surface morphology and fibres quality of PbTiO3 nanofibres were examined by Field Emission Scanning Electron Microscopy (FESEM). From FESEM image, the fibre diameter was measured to be (150-180 nm) with different collector distances. The experimental data resulted from this research showed that the home-made device compiled and growth chemistry was technically simple and easily adaptable.
    VL  - 6
    IS  - 1
    ER  - 

    Copy | Download

  • Sections