Optics

| Peer-Reviewed |

Fabrication of Micro-grating Structure by Nanosecond Laser

Received: 23 February 2015    Accepted: 30 March 2015    Published: 12 May 2015
Views:       Downloads:

Share This Article

Abstract

The fabrication method by nanosecond laser technology for micro-grating is investigated in this paper. A nanosecond laser system is established and the mechanism of laser processing on material surface is theoretically analyzed. The damage threshold of stainless steel is obtained experimentally when the nanosecond laser irradiates on the specimen’s surface and the influence of the laser pulse energy to the fabricated micro-gratings are also studied. In the end, micro-gratings with high-quality are provided to validate the feasibility of the fabrication method by nanosecond laser technology.

DOI 10.11648/j.optics.s.2015040301.12
Published in Optics (Volume 4, Issue 3-1, June 2015)

This article belongs to the Special Issue Optical Techniques for Deformation, Structure and Shape Evaluation

Page(s) 5-8
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Grating, Nanosecond Laser, Photomechanics

References
[1] B.Han, “Higher sensitivity moiré interferometry for micromechanics Studies,” Optical Engineering vol. 31, pp.1517-1526, 1992.
[2] J.L.Rouviere, E.Sarigiannidou. Theoretical discussions on the geometrical phase analysis. Ultramicroscopy 106(2005)1–17.
[3] Xie Huimin, Shang Haixia, Dai Fulong, et al. “Phase shifting SEM moiré method,” Optics and Laser Technology, vol.36(4), pp.291-297, 2004.
[4] Moulart R, Rotinat R, Pierron F, et al. “On the realization of microscopic grids for local strain measurement by direct interferometric photolithography,”Optics and lasers in engineering, vol.45(12), pp.1131-1147, 2007.
[5] Tang M, Xie Huimin, Li Y, et al. “A New Grating Fabrication Technique on Metal Films Using UV-Nanoimprint Lithography,” Chinese Physics Letters, vol.29(9), pp.098101,2012.
[6] Kishimoto S, Tanaka Y, Yin F, et al. “Strain distribution measurement in laminated martensitic/austenitic steel during a compressive test by the electron moire method,” Journal of Strain Analysis for Engineering Design, 2011.
[7] Du Hua, Xie Huimin, Guo Zhiqiang, et al. “Development of the Technique for Fabricating Submicron MoiréGratings on Metal Materials Using Focused Ion Beam Milling,” Chinese Physics Letters, vol.24,pp.2521-2524, 2007.
[8] Yung-Chun Lee, Chun-Ming Chen, Chun-Ying Wu. “A new excimer laser micromachining method for axially symmetric 3D micro-structures with continuous surface profiles,” Sensors and Actuators A. vol.117,pp.349–355, 2005.
[9] Felter T E, Hrubesh L, Kubota A, et al. “Laser damage probability studies of fused silica modified by MeV ion implantation,” Nuclear Instruments and Methods in Physics Research B, vol. 27,pp.72-79, 2003.
[10] J.M.Liu. “Simpletechnique for measurements of pulsed Gaussian-beam spot sizes,” Opt. Lett., vol.7(5), pp.196~198, 1982.
Author Information
  • Faculty of Civil Engineering and Mechanics, Jiangsu University, Zhenjiang, China

  • Faculty of Civil Engineering and Mechanics, Jiangsu University, Zhenjiang, China

Cite This Article
  • APA Style

    Yanlong Huang, Jianguo Zhu. (2015). Fabrication of Micro-grating Structure by Nanosecond Laser. Optics, 4(3-1), 5-8. https://doi.org/10.11648/j.optics.s.2015040301.12

    Copy | Download

    ACS Style

    Yanlong Huang; Jianguo Zhu. Fabrication of Micro-grating Structure by Nanosecond Laser. Optics. 2015, 4(3-1), 5-8. doi: 10.11648/j.optics.s.2015040301.12

    Copy | Download

    AMA Style

    Yanlong Huang, Jianguo Zhu. Fabrication of Micro-grating Structure by Nanosecond Laser. Optics. 2015;4(3-1):5-8. doi: 10.11648/j.optics.s.2015040301.12

    Copy | Download

  • @article{10.11648/j.optics.s.2015040301.12,
      author = {Yanlong Huang and Jianguo Zhu},
      title = {Fabrication of Micro-grating Structure by Nanosecond Laser},
      journal = {Optics},
      volume = {4},
      number = {3-1},
      pages = {5-8},
      doi = {10.11648/j.optics.s.2015040301.12},
      url = {https://doi.org/10.11648/j.optics.s.2015040301.12},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.optics.s.2015040301.12},
      abstract = {The fabrication method by nanosecond laser technology for micro-grating is investigated in this paper. A nanosecond laser system is established and the mechanism of laser processing on material surface is theoretically analyzed. The damage threshold of stainless steel is obtained experimentally when the nanosecond laser irradiates on the specimen’s surface and the influence of the laser pulse energy to the fabricated micro-gratings are also studied. In the end, micro-gratings with high-quality are provided to validate the feasibility of the fabrication method by nanosecond laser technology.},
     year = {2015}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Fabrication of Micro-grating Structure by Nanosecond Laser
    AU  - Yanlong Huang
    AU  - Jianguo Zhu
    Y1  - 2015/05/12
    PY  - 2015
    N1  - https://doi.org/10.11648/j.optics.s.2015040301.12
    DO  - 10.11648/j.optics.s.2015040301.12
    T2  - Optics
    JF  - Optics
    JO  - Optics
    SP  - 5
    EP  - 8
    PB  - Science Publishing Group
    SN  - 2328-7810
    UR  - https://doi.org/10.11648/j.optics.s.2015040301.12
    AB  - The fabrication method by nanosecond laser technology for micro-grating is investigated in this paper. A nanosecond laser system is established and the mechanism of laser processing on material surface is theoretically analyzed. The damage threshold of stainless steel is obtained experimentally when the nanosecond laser irradiates on the specimen’s surface and the influence of the laser pulse energy to the fabricated micro-gratings are also studied. In the end, micro-gratings with high-quality are provided to validate the feasibility of the fabrication method by nanosecond laser technology.
    VL  - 4
    IS  - 3-1
    ER  - 

    Copy | Download

  • Sections