Optics

| Peer-Reviewed |

Residual Stress Measurement of an Interference Fit Specimen Based on Moiré Interferometry and Hole-Drilling Method

Received: 16 February 2015    Accepted: 23 March 2015    Published: 12 May 2015
Views:       Downloads:

Share This Article

Abstract

In this paper, moiré interferometry is combined with hole-drilling method to measure the residual stress of an interference fit specimen. And, finite element method is used to calibrate the coefficient of hole-drilling method. The experimental results are consistent with theoretical results, which manifests that moiré interferometry combined with hole-drilling method are reliable and effective for residual stress measurement.

DOI 10.11648/j.optics.s.2015040301.11
Published in Optics (Volume 4, Issue 3-1, June 2015)

This article belongs to the Special Issue Optical Techniques for Deformation, Structure and Shape Evaluation

Page(s) 1-4
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Moiré Interferometry, Hole-Drilling Method, Interference Fit, Residual Stress

References
[1] A. S. Franchim, V.S. de Camposa, D. N. Travessa, and C.D. Moura Neto, "Analytical modelling for residual stresses produced by shot peening". MATER DESIGN, 2009. 30(5): p. 1556-1560
[2] S.M.H Gangaraj, M. Guagliano, and G.H. Farrahi, "An approach to relate shot peening finite element simulation to the actual coverage". SURF COAT TECH, 2014. 243: p. 39-45.
[3] T.Hong, J.Y. Ooi, and B. Shaw, "A numerical simulation to relate the shot peening parameters to the induced residual stresses". ENG FAIL ANAL, 2008. 15(8): p. 1097-1110.
[4] P.J. Withers and H. Bhadeshia, "Overview - Residual stress part 1 - Measurement techniques". MATER SCI TECH-LOND, 2001. 17(4): p. 355-365.
[5] B. Zuccarello and G. Di Franco, "Numerical-experimental Method for the Analysis of Residual Stresses in Cold-expanded Holes". EXP MECH, 2013. 53(4): p. 673-686.
[6] M. Frija, T. Hassine, R. Fathallah, C. Bouraoui, and A. Dogui,"Finite element modelling of shot peening process: Prediction of the compressive residual stresses, the plastic deformations and the surface integrity". MAT SCI ENG A-STRUCT, 2006. 426(1-2): p. 173-180.
[7] N.S. Rossini, M. Dassisti, K.Y. Benyounis, and A.G. Olabi, "Methods of measuring residual stresses in components". MATER DESIGN, 2012. 35: p. 572-588.
[8] P.J. Withers, "Residual stress and its role in failure". REP PROG PHYS, 2007. 70(12): p. 2211-2264
[9] H. Schmidt and J. Hattel, "A local model for the thermomechanical conditions in friction stir welding". MODEL SIMUL MATER SC, 2005. 13(1): p. 77-93.
[10] H.M. Xie, B. Li, R. Geer, B. Xu, and J. Castracane, "Focused ion beam Moire method". OPT LASER ENG, 2003. 40(3): p. 163-177.
[11] T. Kim, H. Lee, M. Kim, and S. Jung," A 3D FE model for evaluation of peening residual stress under angled multi-shot impacts". SURF COAT TECH, 2012. 206(19-20): p. 3981-3988
[12] F. Yang, Z. Chen, and S.A. Meguid, "3D FE modeling of oblique shot peening using a new periodic cell". INT J MECH MATER DES, 2014. 10(2): p. 133-144
Author Information
  • Faculty of Civil Engineering and Mechanics, Jiangsu University, Zhenjiang, China

  • Faculty of Civil Engineering and Mechanics, Jiangsu University, Zhenjiang, China

Cite This Article
  • APA Style

    Baoge Zhang, Jianguo Zhu. (2015). Residual Stress Measurement of an Interference Fit Specimen Based on Moiré Interferometry and Hole-Drilling Method. Optics, 4(3-1), 1-4. https://doi.org/10.11648/j.optics.s.2015040301.11

    Copy | Download

    ACS Style

    Baoge Zhang; Jianguo Zhu. Residual Stress Measurement of an Interference Fit Specimen Based on Moiré Interferometry and Hole-Drilling Method. Optics. 2015, 4(3-1), 1-4. doi: 10.11648/j.optics.s.2015040301.11

    Copy | Download

    AMA Style

    Baoge Zhang, Jianguo Zhu. Residual Stress Measurement of an Interference Fit Specimen Based on Moiré Interferometry and Hole-Drilling Method. Optics. 2015;4(3-1):1-4. doi: 10.11648/j.optics.s.2015040301.11

    Copy | Download

  • @article{10.11648/j.optics.s.2015040301.11,
      author = {Baoge Zhang and Jianguo Zhu},
      title = {Residual Stress Measurement of an Interference Fit Specimen Based on Moiré Interferometry and Hole-Drilling Method},
      journal = {Optics},
      volume = {4},
      number = {3-1},
      pages = {1-4},
      doi = {10.11648/j.optics.s.2015040301.11},
      url = {https://doi.org/10.11648/j.optics.s.2015040301.11},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.optics.s.2015040301.11},
      abstract = {In this paper, moiré interferometry is combined with hole-drilling method to measure the residual stress of an interference fit specimen. And, finite element method is used to calibrate the coefficient of hole-drilling method. The experimental results are consistent with theoretical results, which manifests that moiré interferometry combined with hole-drilling method are reliable and effective for residual stress measurement.},
     year = {2015}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Residual Stress Measurement of an Interference Fit Specimen Based on Moiré Interferometry and Hole-Drilling Method
    AU  - Baoge Zhang
    AU  - Jianguo Zhu
    Y1  - 2015/05/12
    PY  - 2015
    N1  - https://doi.org/10.11648/j.optics.s.2015040301.11
    DO  - 10.11648/j.optics.s.2015040301.11
    T2  - Optics
    JF  - Optics
    JO  - Optics
    SP  - 1
    EP  - 4
    PB  - Science Publishing Group
    SN  - 2328-7810
    UR  - https://doi.org/10.11648/j.optics.s.2015040301.11
    AB  - In this paper, moiré interferometry is combined with hole-drilling method to measure the residual stress of an interference fit specimen. And, finite element method is used to calibrate the coefficient of hole-drilling method. The experimental results are consistent with theoretical results, which manifests that moiré interferometry combined with hole-drilling method are reliable and effective for residual stress measurement.
    VL  - 4
    IS  - 3-1
    ER  - 

    Copy | Download

  • Sections