| Peer-Reviewed

Geometrical Parameters Dependence Towards Ultra-Flat Dispersion Square-Lattice PCF with Selective Liquid Infiltration

Received: 6 November 2013    Accepted:     Published: 10 December 2013
Views:       Downloads:
Abstract

We have performed a numerical analysis of the structural dependence of the PCF parameters towards ultra-flat dispersion in the C-band of communication wavelength. The technique is based on regular square-lattice PCF with all the air-hole of same uniform diameter and the effective size of the air-holes are modified with a selective infiltration of the air-holes with liquids. The dependence of the PCF structural parameters namely air-hole diameter and hole-to-hole distance along with the infiltrating liquid has been investigated in details. It is shown that the infiltrating liquid has critical influence on both the slope and value of dispersion, while pitch only changes the dispersion value whereas air-hole diameter modifies the slope of the dispersion. Our numerical investigation establishes dispersion values as small as 0±0.58ps/(nm-km) over a bandwidth of 622nm in the communication wavelength band (C-band). The proposed design study will be very helpful in high power applications like broadband smooth supercontinuum generation, ASE suppressed amplification etc.

Published in American Journal of Optics and Photonics (Volume 1, Issue 5)
DOI 10.11648/j.ajop.20130105.11
Page(s) 28-32
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Photonic Crystal Fibers (PCFs), Microstructured Optical Fibers (MOFs), Dispersion, Ultra-Flat Dispersion, Square-Lattice

References
[1] J. Broeng, D. Mogilevstev, S. E. Barkou and A. Bjakle, "Photonic Crystal Fibers: a new class of optical waveguides" Opt. Fiber Tech. 5, 305-330 (1999).
[2] P. St. J. Russel, "Photonic-Crystal Fibers". J of Lightwave Tech. 24, 4729-4749 (2006)
[3] B. T. Kuhlmey, G. Renversez and D. Maystre, "Chromatic dispersion and losses of microstructured optical fibers," Appl. Opt. 42, 634–639 (2003).
[4] A. H. Bouk, A. Cucinotta, F. Poli, S. Selleri "Dispersion properties of square-lattice photonic crystal fibers," Opt Express 12, 941 (2004)
[5] T. Fujisawa, K. Saitoh, K. Wada, and M. Koshiba, "Chromatic dispersion profile optimization of dual-concentric-core photonic crystal fibers for broadband dispersion compensation," Opt. Express 14, 893–900 (2006).
[6] H. Subbaraman, T. Ling, Y-.Q. Jiang, M. Y. Chen, P. Cao, and R. T. Chen, "Design of a broadband highly dispersive pure silica photonic crystal fiber," Appl. Opt. 46, 3263–3268 (2007).
[7] A. Ferrando, E. Silvestre, J.J. Miret, and P. Andres, "Nearly zero ultra-flattened dispersion in photonic crystal fibers," Opt. Lett. 25, 790-792 (2000)
[8] A. Ferrando, E. Silvestre, and P. Andres, "Designing the properties of dispersion-flattened photonic crystal fiber," Opt. Express 9, 687-697 (2001)
[9] W. H. Reeves, J. C. Knight, P. St. J. Russell, and P. J. Roberts, "Demonstration of ultra-flattened dispersion in photonic crystal fibers," Opt. Express 10, 609-613 (2002).
[10] K. P. Hansen, "Dispersion flattened hybrid-core nonlinear photonic crystal fiber," Opt. Express 11, 1503-1509 (2003).
[11] K. Saitoh, N. J. Florous, and M. Koshiba, "Theoretical realization of holey fiber with flat chromatic dispersion and large mode area: an intriguing defected approach," Opt. Lett. 31, 26-28 (2006).
[12] N. J. Florous, K. Saitoh, andM. Koshiba, "The role of artificial defects for engineering large effective mode area, flat chromatic dispersion and low leakage losses in photonic crystal fibers: Towards high speed reconfigurable transmission platforms," Opt. Express 14, 901-913 (2006).
[13] K. Saitoh and M. Koshiba, "Highly nonlinear dispersion-flattened photonic crystal fibers for supercontinuum generation in a telecommunication window," Opt. Express 12, 2027-2032 (2004).
[14] K. Saitoh, M. Koshiba, T. Hasegawa, and E. Sasaoka, "Chromatic dispersion control in photonic crystal fibers: application to ultra-flattened dispersion," Opt. Express 11, 843-852 (2003).
[15] F. Poletti, V. Finazzi, T. M. Monro, N. G. R. Broderick, V. Tse, and D. J. Richardson, "Inverse design and fabrication tolerances of ultra-flattened dispersion holey fibers," Opt. Express 13, 3728-3736 (2005).
[16] T.-L. Wu and C.-H. Chao, "A Novel Ultraflattened Dispersion Photonic Crystal Fiber," IEEE Photon. Technol. Lett. 17, 67-69 (2005).
[17] J. Eggleton, C. Kerbage, P. S.Westbrook, R. S.Windeler, and A. Hale, "Microstructured optical fiber devices," Opt. Express 9, 698-713 (2001).
[18] Martelli, J. Canning, K. Lyytikainen, and N. Groothoff, "Water-core Fresnel fiber," Opt. Express 13, 3890-3895 (2005).
[19] S. Yiou, P. Delaye, A. Rouvie, J. Chinaud, R. Frey, G. Roosen, P. Viale, S. F´evrier, P. Roy, J.-L. Auguste, and J.-M. Blondy, "Stimulated Raman scattering in an ethanol core microstructured optical fiber," Opt. Express 13, 4786-4791 (2005).
[20] C. Yu and J. Liou, "Selectively liquid-filled photonic crystal fibers for optical devices," Opt. Express 17, 8729-8734 (2009).
[21] F. Poli, M. Foroni, M Bottacini, M. Fuochi, N. Burani, L. Rosa. A. Cucinotta, and S. Selleri, "Single mode regime of square-lattice photonic crystal fibers,"J. Opt. Soc. A. 22, 1655(2005).
[22] L. Xiao, W. Jin, M. Demokan, H. Ho, Y. Hoo, and C. Zhao, "Fabrication of selective injection microstructured optical fibers with a conventional fusion splicer," Opt. Express 13, 9014-9022 (2005).
[23] CUDOS MOF utilities available online: http://www.physics.usyd.edu.au/cudos/mofsoftware/
[24] T. P. White, B. T. Kuhlmey, R. C. PcPhedran, D. Maystre, G. Renversez, C. M de Sterke and L. C. Botten, "Multipole method for microstructured optical fibers. I. Formulation" J. Opt. Soc. Am. B. 19, 2322 (2002).
[25] B. T. Kuhlmey, T. P. White, R. C. PcPhedran, D. Maystre, G. Renversez, C. M de Sterke and L. C. Botten, "Multipole method for microstructured optical fibers. II. Implementataion and results." J. Opt. Soc. Am. B. 19, 2331 (2002).
[26] http://www.cargille.com/
[27] P. S Maji and P Roy Chuadhuri,, "Supercontinuum Generation (SCG) with ultra-flat dispersion using all uniform air-hole square-lattice PCF with selective infiltration,"
Cite This Article
  • APA Style

    Partha Sona Maji, Partha Roy Chaudhuri. (2013). Geometrical Parameters Dependence Towards Ultra-Flat Dispersion Square-Lattice PCF with Selective Liquid Infiltration. American Journal of Optics and Photonics, 1(5), 28-32. https://doi.org/10.11648/j.ajop.20130105.11

    Copy | Download

    ACS Style

    Partha Sona Maji; Partha Roy Chaudhuri. Geometrical Parameters Dependence Towards Ultra-Flat Dispersion Square-Lattice PCF with Selective Liquid Infiltration. Am. J. Opt. Photonics 2013, 1(5), 28-32. doi: 10.11648/j.ajop.20130105.11

    Copy | Download

    AMA Style

    Partha Sona Maji, Partha Roy Chaudhuri. Geometrical Parameters Dependence Towards Ultra-Flat Dispersion Square-Lattice PCF with Selective Liquid Infiltration. Am J Opt Photonics. 2013;1(5):28-32. doi: 10.11648/j.ajop.20130105.11

    Copy | Download

  • @article{10.11648/j.ajop.20130105.11,
      author = {Partha Sona Maji and Partha Roy Chaudhuri},
      title = {Geometrical Parameters Dependence Towards Ultra-Flat Dispersion Square-Lattice PCF with Selective Liquid Infiltration},
      journal = {American Journal of Optics and Photonics},
      volume = {1},
      number = {5},
      pages = {28-32},
      doi = {10.11648/j.ajop.20130105.11},
      url = {https://doi.org/10.11648/j.ajop.20130105.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajop.20130105.11},
      abstract = {We have performed a numerical analysis of the structural dependence of the PCF parameters towards ultra-flat dispersion in the C-band of communication wavelength. The technique is based on regular square-lattice PCF with all the air-hole of same uniform diameter and the effective size of the air-holes are modified with a selective infiltration of the air-holes with liquids. The dependence of the PCF structural parameters namely air-hole diameter and hole-to-hole distance along with the infiltrating liquid has been investigated in details. It is shown that the infiltrating liquid has critical influence on both the slope and value of dispersion, while pitch only changes the dispersion value whereas air-hole diameter modifies the slope of the dispersion. Our numerical investigation establishes dispersion values as small as 0±0.58ps/(nm-km) over a bandwidth of 622nm in the communication wavelength band (C-band). The proposed design study will be very helpful in high power applications like broadband smooth supercontinuum generation, ASE suppressed amplification etc.},
     year = {2013}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Geometrical Parameters Dependence Towards Ultra-Flat Dispersion Square-Lattice PCF with Selective Liquid Infiltration
    AU  - Partha Sona Maji
    AU  - Partha Roy Chaudhuri
    Y1  - 2013/12/10
    PY  - 2013
    N1  - https://doi.org/10.11648/j.ajop.20130105.11
    DO  - 10.11648/j.ajop.20130105.11
    T2  - American Journal of Optics and Photonics
    JF  - American Journal of Optics and Photonics
    JO  - American Journal of Optics and Photonics
    SP  - 28
    EP  - 32
    PB  - Science Publishing Group
    SN  - 2330-8494
    UR  - https://doi.org/10.11648/j.ajop.20130105.11
    AB  - We have performed a numerical analysis of the structural dependence of the PCF parameters towards ultra-flat dispersion in the C-band of communication wavelength. The technique is based on regular square-lattice PCF with all the air-hole of same uniform diameter and the effective size of the air-holes are modified with a selective infiltration of the air-holes with liquids. The dependence of the PCF structural parameters namely air-hole diameter and hole-to-hole distance along with the infiltrating liquid has been investigated in details. It is shown that the infiltrating liquid has critical influence on both the slope and value of dispersion, while pitch only changes the dispersion value whereas air-hole diameter modifies the slope of the dispersion. Our numerical investigation establishes dispersion values as small as 0±0.58ps/(nm-km) over a bandwidth of 622nm in the communication wavelength band (C-band). The proposed design study will be very helpful in high power applications like broadband smooth supercontinuum generation, ASE suppressed amplification etc.
    VL  - 1
    IS  - 5
    ER  - 

    Copy | Download

Author Information
  • Department of Physics and Meteorology, Indian Institute of Technology, Kharagpur, India

  • Department of Physics and Meteorology, Indian Institute of Technology, Kharagpur, India

  • Sections