American Journal of Optics and Photonics

| Peer-Reviewed |

The Effect of Temperature and Laser Type on Optical Fiber Temperature Coefficient

Received: 4 December 2016    Accepted: 17 March 2017    Published: 5 April 2017
Views:       Downloads:

Share This Article

Abstract

Optical fibers are widely used in communication and information systems. This needs studying the factors that affect signal quality. In this work and optical fibers having two different laser beams passing through it were exposed to heat by raising temperature from 30°C to 50°C in steps of 2°C. The empirical relation shows linear increase of attenuation coefficient with temperature. This linear relation can shows that the temperature sensitivity of semiconductor and He-Ne laser are 0.01 and 0.4 respectively. This means that using He-Ne laser in transmitting information is better than semiconductor laser because the former is less sensitive to temperature. It also shows that semiconductor laser is suitable to make fiber act as temperature sensor, since its sensitivity is high.

DOI 10.11648/j.ajop.20170501.11
Published in American Journal of Optics and Photonics (Volume 5, Issue 1, February 2017)
Page(s) 1-5
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Optical Fiber, Attenuation Coefficient, Temperature, Sensor, Sensitivity

References
[1] J. F. B. Hawkes; J. Wilson Lasers Principles and Applications (Prentice Hall International Series in Optoelectronics)... Softcover. ISBN 10: 0135236975 ISBN 13: 9780135236970. Publisher: Prentice Hall College Div, 1987... PRINT ON DEMAND Book; New; Publication Year 2016; Not Signed; Fast Shipping from the UK.
[2] S. C. Singh, ‎H. B. Zeng, ‎Chunlei Guo - 2012 - ‎Technology & Engineering ISBN: 020105509-0.
[3] Ifflander, R. (ed.) (2001) Solid State Laser Material Processing: Fundamental Relations & Technical Realizations, Springer-Verlag, Berlin, Heidelberg. ISBN: 354066980-9.
[4] S. C. Singh, ‎H. B. Zeng, ‎Chunlei Guo - 2012 - ‎Technology & Engineering Processing and Characterization with Lasers S. C. Singh, H. B. Zeng, Chunlei Guo, Weiping.
[5] Jyoti Kattimani, (2013), Basic of Laser and its Progress in Different Fields, International Journal of Science and Research (IJSR) ISSN (Online): 2319-7064 Index Copernicus Value): Volume 5 Issue 4.
[6] G Margaritondo, (‎2011), Mechanism of a free-electron laser for X-rays., Laser Handbook, Vol. 4, edited by M. L. Stich and M. S. Bass.
[7] Wilson, J. and Hawkes, J. F. B. (eds) (1987) Lasers: Principles and Applications, Prentice Hall Publications. ISBN: 013523697-5.
[8] O’Shea, D. C., Callen, W. R., and Rhodes, W. T. (eds) (1977) Introduction to Lasers and their Applications, Addison-Wesley Publishing Company, Inc., Philippines. ISBN: 020105509-0.
[9] Ifflander, R. (ed.) (2001) Solid State Laser Material Processing: Fundamental Relations & Technical Realizations, Springer-Verlag, Berlin, Heidelberg. ISBN: 354066980-9.
[10] Weber, M. J. (ed.) (1991) Handbook of Laser Science and Technology, CRC Press, Boca Raton, FL, Ann Arbor, MI, Boston, MA. ISBN: 084933506-X.
[11] Letokhov, V. S., Shank, C. V., Shen, Y. R., and Walther, H. (eds) (1991) Interaction of Intense Laser Light with Free Electrons, M. V. Fedorov; Laser Science and Technology and International Handbook, Harwood Academic Publishers GmbH, Switzerland. ISBN-3718651262.
[12] Dattoli, G. and Renieri, A. (1984) Experimental and theoretical aspects of Free-Electron Lasers, in Laser Handbook, vol. 4 (eds M. L. Stich and M. S. Bass), North Holland, Amsterdam.
[13] Marshall, J. C. (1985) Free Electron Lasers, Mac Millan Publishing Company, New York.
[14] Luchini, P. and Motz, H. (1990) Undulators and Free-Electron Lasers, Claredon Press, Oxford.
[15] Colson, W. B., Pellegrini, C., and Renieri, A. (eds) (1990) Laser Handbook, Free-Electron Lasers, vol. North Holland, Amsterdam.
[16] Brau, C. A. (1990) Free-Electron Lasers, Academic Press, Oxford.
[17] Dattoli, G., Renieri, A., and Torre, A. (1995) Lectures in Free-Electron Laser Theory and Related Topics, World Scientific, Singapore.
[18] Dunn, J., Osterheld, A. L., Shepherd, R., White, W. E., Shlyaptsev, V. N., and Stewart, R. E. (1998) Demonstration of x-ray amplification in transient gain nickel-like palladium scheme. Phys. Rev. Lett., 80 (13), 2825–2828.
[19] Franken, P. A., Hill, A. E., Peters, C. W., and Weinreich, G. (1961) Generation of optical harmonics. Phys. Rev. Lett., 7,118.
[20] Amel Abdallah Ahmed Elfaki, Mubarak Dirar Abd-Alla, Rawia Abd Elgani, Ali Suliman Mohammed, Alaa Ahmed Mohammed, Abdelnabi Ali Elamin, Sawsan Ahmed Elhouri. (2017), The Effect of Temperature on Conductivity of Conductors and Superconductors. American Journal of Physics and Applications. Vol. 5, No. 1, 2017, pp. 1-5. doi: 10.11648/j.ajpa.20170501.11.
Cite This Article
  • APA Style

    Amel Abdallah Ahmed Elfaki, Rawia Abdelgani Elobaid, Abdelnabi Ali Elamin, Mubarak Dirar Abd-Alla. (2017). The Effect of Temperature and Laser Type on Optical Fiber Temperature Coefficient. American Journal of Optics and Photonics, 5(1), 1-5. https://doi.org/10.11648/j.ajop.20170501.11

    Copy | Download

    ACS Style

    Amel Abdallah Ahmed Elfaki; Rawia Abdelgani Elobaid; Abdelnabi Ali Elamin; Mubarak Dirar Abd-Alla. The Effect of Temperature and Laser Type on Optical Fiber Temperature Coefficient. Am. J. Opt. Photonics 2017, 5(1), 1-5. doi: 10.11648/j.ajop.20170501.11

    Copy | Download

    AMA Style

    Amel Abdallah Ahmed Elfaki, Rawia Abdelgani Elobaid, Abdelnabi Ali Elamin, Mubarak Dirar Abd-Alla. The Effect of Temperature and Laser Type on Optical Fiber Temperature Coefficient. Am J Opt Photonics. 2017;5(1):1-5. doi: 10.11648/j.ajop.20170501.11

    Copy | Download

  • @article{10.11648/j.ajop.20170501.11,
      author = {Amel Abdallah Ahmed Elfaki and Rawia Abdelgani Elobaid and Abdelnabi Ali Elamin and Mubarak Dirar Abd-Alla},
      title = {The Effect of Temperature and Laser Type on Optical Fiber Temperature Coefficient},
      journal = {American Journal of Optics and Photonics},
      volume = {5},
      number = {1},
      pages = {1-5},
      doi = {10.11648/j.ajop.20170501.11},
      url = {https://doi.org/10.11648/j.ajop.20170501.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajop.20170501.11},
      abstract = {Optical fibers are widely used in communication and information systems. This needs studying the factors that affect signal quality. In this work and optical fibers having two different laser beams passing through it were exposed to heat by raising temperature from 30°C to 50°C in steps of 2°C. The empirical relation shows linear increase of attenuation coefficient with temperature. This linear relation can shows that the temperature sensitivity of semiconductor and He-Ne laser are 0.01 and 0.4 respectively. This means that using He-Ne laser in transmitting information is better than semiconductor laser because the former is less sensitive to temperature. It also shows that semiconductor laser is suitable to make fiber act as temperature sensor, since its sensitivity is high.},
     year = {2017}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - The Effect of Temperature and Laser Type on Optical Fiber Temperature Coefficient
    AU  - Amel Abdallah Ahmed Elfaki
    AU  - Rawia Abdelgani Elobaid
    AU  - Abdelnabi Ali Elamin
    AU  - Mubarak Dirar Abd-Alla
    Y1  - 2017/04/05
    PY  - 2017
    N1  - https://doi.org/10.11648/j.ajop.20170501.11
    DO  - 10.11648/j.ajop.20170501.11
    T2  - American Journal of Optics and Photonics
    JF  - American Journal of Optics and Photonics
    JO  - American Journal of Optics and Photonics
    SP  - 1
    EP  - 5
    PB  - Science Publishing Group
    SN  - 2330-8494
    UR  - https://doi.org/10.11648/j.ajop.20170501.11
    AB  - Optical fibers are widely used in communication and information systems. This needs studying the factors that affect signal quality. In this work and optical fibers having two different laser beams passing through it were exposed to heat by raising temperature from 30°C to 50°C in steps of 2°C. The empirical relation shows linear increase of attenuation coefficient with temperature. This linear relation can shows that the temperature sensitivity of semiconductor and He-Ne laser are 0.01 and 0.4 respectively. This means that using He-Ne laser in transmitting information is better than semiconductor laser because the former is less sensitive to temperature. It also shows that semiconductor laser is suitable to make fiber act as temperature sensor, since its sensitivity is high.
    VL  - 5
    IS  - 1
    ER  - 

    Copy | Download

Author Information
  • Department of Physics, College of Science, Sudan University of Science and Technology, Khartoum, Sudan

  • Department of Physics, College of Science, Sudan University of Science and Technology, Khartoum, Sudan

  • Department of Physics, College of Science and Technology, Omdurman Islamic University, Omdurman, Sudan

  • Department of Physics, College of Science, Sudan University of Science and Technology, Khartoum, Sudan

  • Sections