American Journal of Physical Chemistry

| Peer-Reviewed |

Decolorization of Reactive Red 239 Via Heat Activated Persulfate

Received: 14 August 2018    Accepted: 03 September 2018    Published: 09 October 2018
Views:       Downloads:

Share This Article

Abstract

Effluents of cotton dyeing process of textile industry is considered as extremely polluted due to presence of unfixed azo dyes and auxiliary chemicals. The complex aromatic structure and non-biodegradability nature of azo dyes involved new and efficient treatment technologies to eliminate intense color from textile wastewater. In recent years, in-situ chemical oxidation technology (ISCO) using persulfate (S2O82-) as an oxidant has appeared to be a promising method for removal of azo dyes. S2O82- can be activated by UV, heat or transition metals to generate sulfate radical (SO4-). In this study, decolorization of Reactive Red 239 (RR239) azo dye via heat activated S2O82- was explored. Experiments were conducted in a cylindrical batch reactor equipped with a water jacket. Effect of parameters such as temperature, pH and S2O82- concentration on decolorization of RR239 was investigated. The results show that decolorization efficiency was enhanced with increasing temperature from 45 to 55°C but further increase in temperature did not enhance decolorization. The pseudo first order rate constant values fit well Arrhenius equation, yielding an activation energy of 108.75 kJ mol-1 for decolorization of RR239. The highest decolorization efficiency was obtained at pH=3 under the tested pH range. As S2O82- concentration increased decolorization efficiency increased. 89.67% and 39.05% decolorization and aromatic degradation efficiencies were observed within 120 minutes of reaction time, respectively. These results show that heat activated S2O82- method was a feasible method for decolorization of RR239.

DOI 10.11648/j.ajpc.20180703.11
Published in American Journal of Physical Chemistry (Volume 7, Issue 3, September 2018)
Page(s) 45-49
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Heat Activated Persulfate, Sulfate Radical, Azo Dye, Decolorization

References
[1] L. Biliska, M. Gmurek, and S. Ledakowicz, “Comparison between industrial and simulated textile wastewater treatment by AOPs – Biodegradability, toxicity and cost assessment” Chem. Eng. J., vol. 306, pp. 550-559, 2016.
[2] C. R. Holkar, A. J. Jadhav, D. V. Pinjari, N. M. Mahamuni, and A. B. Pandit, “A critical review on textile wastewater treatments: Possible approaches” J. Environ. Manage., vol.182, pp.351-366, 2016.
[3] H. U. Farouk, A. A. A. Raman and W. M. A. W Daud, “TiO2 catalyst deactivation in textile wastewater treatment: Current challenges and future advances” J. Ind. Eng. Chem., vol. 33, pp. 11-21, 2016.
[4] V. J. P. Vilar, L. X. Pinho, A. M. A. Pintor and R. A. R. Boaventura, “Treatment of textile wastewaters by solar-driven advanced oxidation processes” Sol. Energy, vol. 85, pp. 1927-1934, 2011.
[5] I. K. Konstantinou and T. A. A lbanis, “TiO2-assisted photocatalytic degradation of azo dyes in aqueous solution: kinetic and mechanistic investigations A review” Appl. Catal. Environ., Vol. 49, pp. 1-14, 2004.
[6] D. Salari, A. Niaeri, S. Aber and M. H. Rasoulifard, “The Photooxidative destruction of C. I. Basic Yellow 2 using UV/ S2O82- process in a rectangular continuous photoreactor” J. Hazard. Mater., vol. 166, pp. 61-66, 2009.
[7] K.-C. Huang, R. A. Couttenye and G. E. Hoang, “Kinetics of heat-assisted persulfate oxidation of methyl tert-butyl ether (MTBE)” Chemosphere, vol. 49, pp. 413-420, 2002.
[8] G.-D. Fang, D. D. Dionysiou, D.-M. Zhou, Y., Wang, X.- D. Zhu, J.- X. Fan, L. Cang and Y.- J. Wang. “Transformation of polychlorinated biphenyls by persulfate at ambient temperature” Chemosphere, vol. 90, pp. 1573-1580, 2013.
[9] L. Zhao, H. Hou, A. Fujii, M. Hosomi and F. Li, “Degradation of 1,4-dioxane in water with heat-and Fe2+ -activated persulfate oxidation” Environ. Sci. Pollut. Res., vol. 21, pp. 7457-7465, 2014.
[10] C. Jiang, Y. Ji, Y. Shi, J. Chen and T. Cai, “Sulfate radical-based oxidation of fluoroquinolone antibiotics: Kinetics, mechanisms and effects of natural water matrices” Water Res., vol. 106, pp. 507-517, 2016.
[11] M. C. Yeber, L. Diaz and J. Fernandez, “Catalytic activity of the SO4- radical for photodegradation of the azo dye Cibacron Brilliant Yellow 3 and 3,4-dichlorophenol: Optimization by application of response surface methodology” J. Photochem. Photobiol. A: Chem., vol. 215, pp. 90-95, 2010.
[12] S. Yang., P. Wang, X. Yang, L. Shan, W. Zhang, X. Shao and R. Niu, “Degradation efficiencies of azo dye Acid Orange 7 by the interaction of heat, UV and anions with common oxidants: Persulfate, peroxymonosulfate and hydrogen peroxide” J. Hazard. Mater., vol. 179, pp. 552-558, 2010.
[13] A. R. Khataee, “Optimization of UV-promoted peroxydisulfate oxidation of C. I. Basic Blue 3 using resonse surface methodology” Environ. Technol., vol. 31, pp. 73-86, 2010.
[14] J. Saien, A. R. Soleymani and J. H. Sun, “Parametric optimization of individual and hybridized AOPs of Fe2+/H2O2 and UV/ S2O82- for rapid dye destruction in aqueous media” Desalination, vol. 279, pp. 298-305, 2011.
[15] C. Tan, N. Gao, Y. Deng, N. An and J. Deng, “Heat-activated persulfate oxidation of diuron in water” Chem. Eng. J., vol. 203, pp. 294-300, 2012.
[16] A. Ghauch, A. M. Tuqan and N. Kibbi, “Ibuprofen removal by heated persulfate in aqueous solutions: A kinetics study” Chem. Eng. J., vol. 197, pp. 483-492, 2012.
[17] A. Ghauch, A. M. Tuqan, N. Kibbi and S. Geryes, “Methylene blue discoloration by heated persulfate in aqueous solution” Chem. Eng. J., vol. 213, pp. 259-271, 2012.
[18] R. Li, J. Kong, H. Liu, P. Chen, G. Liu, F. Li and W. Lv, “A sulfate radical based ferrous-peroxydisulfate oxidative system for indomethacin degradation in aqueous solutions” RSC Adv., vol. 7, pp. 22802-22809, 2017.
[19] A. Ghauch and A. M. Tuqan, “Oxidation of bisoprolol in heated persulfate/H2O systems: Kinetics and products” Chem. Eng. J., vol. 183, pp. 162-171, 2012.
[20] L. Ismail, C. Ferronato, L. Fine, F. Jaber and J. M. Chovelona, “Elimination of sulfaclozine from water with SO4- radicals: Evaluation of different persulfate activation methods” Appl. Catal. B, vol. 201, pp. 573-581, 2017.
[21] P. Hu and M. Long, “Cobalt-catalyzed sulfate radical-based advanced oxidation: A review on heterogeneous catalysts and applications” App. Catal. B, vol. 181, pp. 103-117, 2016.
[22] S. Nasseri, A. H. Mahvi, M. Seyedsalehi, K. Yaghmaeian, R. Nabizadeh, M. Alimohammadi and G. H. Safari, “Degradation kinetics of tetracycline in aqueous solutions using peroxydisulfate activated by ultrasound irradiation: Effect of radical scavenger and water matrix” J. Mol. Liq., vol. 241, pp.704- 714, 2017.
Author Information
  • Department of Chemical Engineering, ?n?nü University, Malatya, Turkey

Cite This Article
  • APA Style

    Ozlem Esen Kartal. (2018). Decolorization of Reactive Red 239 Via Heat Activated Persulfate. American Journal of Physical Chemistry, 7(3), 45-49. https://doi.org/10.11648/j.ajpc.20180703.11

    Copy | Download

    ACS Style

    Ozlem Esen Kartal. Decolorization of Reactive Red 239 Via Heat Activated Persulfate. Am. J. Phys. Chem. 2018, 7(3), 45-49. doi: 10.11648/j.ajpc.20180703.11

    Copy | Download

    AMA Style

    Ozlem Esen Kartal. Decolorization of Reactive Red 239 Via Heat Activated Persulfate. Am J Phys Chem. 2018;7(3):45-49. doi: 10.11648/j.ajpc.20180703.11

    Copy | Download

  • @article{10.11648/j.ajpc.20180703.11,
      author = {Ozlem Esen Kartal},
      title = {Decolorization of Reactive Red 239 Via Heat Activated Persulfate},
      journal = {American Journal of Physical Chemistry},
      volume = {7},
      number = {3},
      pages = {45-49},
      doi = {10.11648/j.ajpc.20180703.11},
      url = {https://doi.org/10.11648/j.ajpc.20180703.11},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ajpc.20180703.11},
      abstract = {Effluents of cotton dyeing process of textile industry is considered as extremely polluted due to presence of unfixed azo dyes and auxiliary chemicals. The complex aromatic structure and non-biodegradability nature of azo dyes involved new and efficient treatment technologies to eliminate intense color from textile wastewater. In recent years, in-situ chemical oxidation technology (ISCO) using persulfate (S2O82-) as an oxidant has appeared to be a promising method for removal of azo dyes. S2O82- can be activated by UV, heat or transition metals to generate sulfate radical (SO4-). In this study, decolorization of Reactive Red 239 (RR239) azo dye via heat activated S2O82- was explored. Experiments were conducted in a cylindrical batch reactor equipped with a water jacket. Effect of parameters such as temperature, pH and S2O82- concentration on decolorization of RR239 was investigated. The results show that decolorization efficiency was enhanced with increasing temperature from 45 to 55°C but further increase in temperature did not enhance decolorization. The pseudo first order rate constant values fit well Arrhenius equation, yielding an activation energy of 108.75 kJ mol-1 for decolorization of RR239. The highest decolorization efficiency was obtained at pH=3 under the tested pH range. As S2O82- concentration increased decolorization efficiency increased. 89.67% and 39.05% decolorization and aromatic degradation efficiencies were observed within 120 minutes of reaction time, respectively. These results show that heat activated S2O82- method was a feasible method for decolorization of RR239.},
     year = {2018}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Decolorization of Reactive Red 239 Via Heat Activated Persulfate
    AU  - Ozlem Esen Kartal
    Y1  - 2018/10/09
    PY  - 2018
    N1  - https://doi.org/10.11648/j.ajpc.20180703.11
    DO  - 10.11648/j.ajpc.20180703.11
    T2  - American Journal of Physical Chemistry
    JF  - American Journal of Physical Chemistry
    JO  - American Journal of Physical Chemistry
    SP  - 45
    EP  - 49
    PB  - Science Publishing Group
    SN  - 2327-2449
    UR  - https://doi.org/10.11648/j.ajpc.20180703.11
    AB  - Effluents of cotton dyeing process of textile industry is considered as extremely polluted due to presence of unfixed azo dyes and auxiliary chemicals. The complex aromatic structure and non-biodegradability nature of azo dyes involved new and efficient treatment technologies to eliminate intense color from textile wastewater. In recent years, in-situ chemical oxidation technology (ISCO) using persulfate (S2O82-) as an oxidant has appeared to be a promising method for removal of azo dyes. S2O82- can be activated by UV, heat or transition metals to generate sulfate radical (SO4-). In this study, decolorization of Reactive Red 239 (RR239) azo dye via heat activated S2O82- was explored. Experiments were conducted in a cylindrical batch reactor equipped with a water jacket. Effect of parameters such as temperature, pH and S2O82- concentration on decolorization of RR239 was investigated. The results show that decolorization efficiency was enhanced with increasing temperature from 45 to 55°C but further increase in temperature did not enhance decolorization. The pseudo first order rate constant values fit well Arrhenius equation, yielding an activation energy of 108.75 kJ mol-1 for decolorization of RR239. The highest decolorization efficiency was obtained at pH=3 under the tested pH range. As S2O82- concentration increased decolorization efficiency increased. 89.67% and 39.05% decolorization and aromatic degradation efficiencies were observed within 120 minutes of reaction time, respectively. These results show that heat activated S2O82- method was a feasible method for decolorization of RR239.
    VL  - 7
    IS  - 3
    ER  - 

    Copy | Download

  • Sections