Experimental and FEM Simulation Analysis of Lateral Extrusion Process on Bimetal Cross Fitting

Le Thai Hung; Do Quang Long; Le Trung Kien; Vu Xuan Hung; Pham Quang

doi:doi:10.11648/j.am.20180703.12

| Peer-Reviewed

Experimental and FEM Simulation Analysis of Lateral Extrusion Process on Bimetal Cross Fitting

Le Thai Hung, Do Quang Long, Le Trung Kien, Vu Xuan Hung, Pham Quang

Published in Advances in Materials (Volume 7, Issue 3)

Received: 17 June 2018 Accepted: 9 July 2018 Published: 15 August 2018

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

The purpose of this paper is to study combines the finite element method model and experimental on bimetal cross fitting by lateral extrusion process. Fabricating bimetallic cross fitting by lateral extrusion technique remains some difficulties like taking the product out of the die hardly, harming the die longevity since the high compressive force and friction effects. The Finite Element Method (FEM) results of bimetal cross fitting lateral extrusion process were obtained from ABAQUS software such as: Stress distribution, metal flow and influence of sleeve thickness. Numerical results were compared with the experimental results shown a good agreement. The bimetal cross fitting has been successfully fabricated by lateral extrusion process. The results showed a close agreement between the numerical simulation and experimental analysis of bimetal cross fitting.

Published in	Advances in Materials (Volume 7, Issue 3)
DOI	10.11648/j.am.20180703.12
Page(s)	67-72
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Bimetal, Cross Fitting, Lateral Extrusion, FEM

References

[1]	T. Altan, “Lateral extrusion Solid forming, Metal Forming Handbook”, Schuler (c) Springer-Verlag Berlin Heidelberg (1998).
[2]	U. C. Paltasingh, S. K. Sahoo, P. Dash, K. C. Nayak,“Simulation and experimental studies for lateral extrusion of square and pentagonal head from round shaft”, International Journal of Research in Engineering and Technology. (2013) pp. 2319-1163.
[3]	M. Zadshakoyan, H. Jafarzadeh, E. A. Sobbouhi, “Injection forging of splines using numerical and experimental study”, International Journal of Aerospace and Mechanical Engineering 4, (2010) pp. 179-184.
[4]	H. Jafarzadeh, M. Zadshakoyan, “Numerical and experimental studies of splines produced by injection forging process”, Materials and Manufacturing Processes 26 (5), (2011) pp. 703-712.
[5]	M. Zadshakoyan, E. A. Sobbouhi, H. Jafarzadeh, “Investigation of precision forging process of spur gears: Numerical analysis and experiments”, Advanced Materials Research 341, (2012) pp. 265-270.
[6]	M. Zadshakoyan, H. Jafarzadeh, E. Abdi Sobbouhi, “Injection Forging of Splines Using Numerical and Experimental Study”, Engineering and Technology International Journal of Industrial and Manufacturing Engineering Vol:3, No:4, (2009) pp. 422-427.
[7]	M. Zadshakoyan and H. Jafarzadeh, “Numerical Study of the Die Geometry and Friction Effect on the Forming Load and Material Flow in Injection Forging Process”. Journal of Applied Sciences, 9 (2009) pp. 2174-2179.
[8]	H. Jafarzadeh, G. Faraji and A. F. Dizaji, “Analysis of lateral extrusion of gear-like form parts,” Journal of Mechanical Science and Technology 26 (2012) pp. 3243-3252
[9]	U. C. Paltasingh, S. K. Sahoo, P. R. Das, K. C. Nayak, S. Potnuru, “Lateral Extrusion of Spur gears with Involute Profile: Finite Element Analysis and Experimental Investigation”, IOSR Journal of Engineering (IOSRJEN), Vol. 3, Issue 7 (2013) pp. 20-30.
[10]	U. C Paltasingh, S. K. Sahoo, P. R. Dash, K. C. Nayak, S. Potnuru, “FEM Analysis And Experimental Investigation For Lateral Extrusion Of Hexagonal Head”, International Journal of Engineering Research and Applications (IJERA), Vol. 3, Issue 4, (2013), pp. 1265-1271.
[11]	M. Plančak, M. Rosochowska, P. Skakun, “Radial extrusion of gear like components – numerical analysis and experiment”, Technical Gazette 20, 5(2013), pp. 891-896.
[12]	I. Kačmarčik, M. Plančak, D. Vilotić, M. Tolnai, D. Movrin, A. Ivanišević, “Numerical analysis of bi-metallic extrusion of gear-like components”, The 6th PSU- UNS International Conference on Engineering and Technology, ICET2013 T. 10-1. 3, (2013) pp. 1-4.
[13]	O. C. Zienkiewicz and R. L. Taylor, “The Finite Element Method (Vol. 2: Solid Mechanics),” Published by Butterworth-Heinemenn (2000).
[14]	E. A. Brandes, “Smithells metals reference book”, Butterworths, (1988).
[15]	A. S. Scari, B. C. Pockszevnicki, J. L. Junior and P. A. A. M. Junior, “Stress-Strain Compression of AA6082-T6 Aluminum Alloy at Room Temperature”, Journal of Structures Volume (2014), Article ID 387680, 7 pages.
[16]	Abaqus 6. 13: Abaqus/CAE User´`s Manual.

Cite This Article

Plain Text BibTeX RIS

APA Style

Le Thai Hung, Do Quang Long, Le Trung Kien, Vu Xuan Hung, Pham Quang. (2018). Experimental and FEM Simulation Analysis of Lateral Extrusion Process on Bimetal Cross Fitting. Advances in Materials, 7(3), 67-72. https://doi.org/10.11648/j.am.20180703.12

Copy | Download

ACS Style

Le Thai Hung; Do Quang Long; Le Trung Kien; Vu Xuan Hung; Pham Quang. Experimental and FEM Simulation Analysis of Lateral Extrusion Process on Bimetal Cross Fitting. Adv. Mater. 2018, 7(3), 67-72. doi: 10.11648/j.am.20180703.12

Copy | Download

AMA Style

Le Thai Hung, Do Quang Long, Le Trung Kien, Vu Xuan Hung, Pham Quang. Experimental and FEM Simulation Analysis of Lateral Extrusion Process on Bimetal Cross Fitting. Adv Mater. 2018;7(3):67-72. doi: 10.11648/j.am.20180703.12

Copy | Download

@article{10.11648/j.am.20180703.12,
  author = {Le Thai Hung and Do Quang Long and Le Trung Kien and Vu Xuan Hung and Pham Quang},
  title = {Experimental and FEM Simulation Analysis of Lateral Extrusion Process on Bimetal Cross Fitting},
  journal = {Advances in Materials},
  volume = {7},
  number = {3},
  pages = {67-72},
  doi = {10.11648/j.am.20180703.12},
  url = {https://doi.org/10.11648/j.am.20180703.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.am.20180703.12},
  abstract = {The purpose of this paper is to study combines the finite element method model and experimental on bimetal cross fitting by lateral extrusion process. Fabricating bimetallic cross fitting by lateral extrusion technique remains some difficulties like taking the product out of the die hardly, harming the die longevity since the high compressive force and friction effects. The Finite Element Method (FEM) results of bimetal cross fitting lateral extrusion process were obtained from ABAQUS software such as: Stress distribution, metal flow and influence of sleeve thickness. Numerical results were compared with the experimental results shown a good agreement. The bimetal cross fitting has been successfully fabricated by lateral extrusion process. The results showed a close agreement between the numerical simulation and experimental analysis of bimetal cross fitting.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - Experimental and FEM Simulation Analysis of Lateral Extrusion Process on Bimetal Cross Fitting
AU  - Le Thai Hung
AU  - Do Quang Long
AU  - Le Trung Kien
AU  - Vu Xuan Hung
AU  - Pham Quang
Y1  - 2018/08/15
PY  - 2018
N1  - https://doi.org/10.11648/j.am.20180703.12
DO  - 10.11648/j.am.20180703.12
T2  - Advances in Materials
JF  - Advances in Materials
JO  - Advances in Materials
SP  - 67
EP  - 72
PB  - Science Publishing Group
SN  - 2327-252X
UR  - https://doi.org/10.11648/j.am.20180703.12
AB  - The purpose of this paper is to study combines the finite element method model and experimental on bimetal cross fitting by lateral extrusion process. Fabricating bimetallic cross fitting by lateral extrusion technique remains some difficulties like taking the product out of the die hardly, harming the die longevity since the high compressive force and friction effects. The Finite Element Method (FEM) results of bimetal cross fitting lateral extrusion process were obtained from ABAQUS software such as: Stress distribution, metal flow and influence of sleeve thickness. Numerical results were compared with the experimental results shown a good agreement. The bimetal cross fitting has been successfully fabricated by lateral extrusion process. The results showed a close agreement between the numerical simulation and experimental analysis of bimetal cross fitting.
VL  - 7
IS  - 3
ER  -

Copy | Download

Author Information

Le Thai Hung

School of Material Science and Engineering, Hanoi University of Science and Technology, Hanoi, Vietnam
Do Quang Long

School of Material Science and Engineering, Hanoi University of Science and Technology, Hanoi, Vietnam
Le Trung Kien

School of Mechanical Engineering, Hanoi University of Science and Technology, Hanoi, Vietnam
Vu Xuan Hung

School of Material Science and Engineering, Hanoi University of Science and Technology, Hanoi, Vietnam
Pham Quang

School of Material Science and Engineering, Hanoi University of Science and Technology, Hanoi, Vietnam

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Le Thai Hung, Do Quang Long, Le Trung Kien, Vu Xuan Hung, Pham Quang. (2018). Experimental and FEM Simulation Analysis of Lateral Extrusion Process on Bimetal Cross Fitting. Advances in Materials, 7(3), 67-72. https://doi.org/10.11648/j.am.20180703.12

Copy | Download

ACS Style

Le Thai Hung; Do Quang Long; Le Trung Kien; Vu Xuan Hung; Pham Quang. Experimental and FEM Simulation Analysis of Lateral Extrusion Process on Bimetal Cross Fitting. Adv. Mater. 2018, 7(3), 67-72. doi: 10.11648/j.am.20180703.12

Copy | Download

AMA Style

Le Thai Hung, Do Quang Long, Le Trung Kien, Vu Xuan Hung, Pham Quang. Experimental and FEM Simulation Analysis of Lateral Extrusion Process on Bimetal Cross Fitting. Adv Mater. 2018;7(3):67-72. doi: 10.11648/j.am.20180703.12

Copy | Download

@article{10.11648/j.am.20180703.12,
  author = {Le Thai Hung and Do Quang Long and Le Trung Kien and Vu Xuan Hung and Pham Quang},
  title = {Experimental and FEM Simulation Analysis of Lateral Extrusion Process on Bimetal Cross Fitting},
  journal = {Advances in Materials},
  volume = {7},
  number = {3},
  pages = {67-72},
  doi = {10.11648/j.am.20180703.12},
  url = {https://doi.org/10.11648/j.am.20180703.12},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.am.20180703.12},
  abstract = {The purpose of this paper is to study combines the finite element method model and experimental on bimetal cross fitting by lateral extrusion process. Fabricating bimetallic cross fitting by lateral extrusion technique remains some difficulties like taking the product out of the die hardly, harming the die longevity since the high compressive force and friction effects. The Finite Element Method (FEM) results of bimetal cross fitting lateral extrusion process were obtained from ABAQUS software such as: Stress distribution, metal flow and influence of sleeve thickness. Numerical results were compared with the experimental results shown a good agreement. The bimetal cross fitting has been successfully fabricated by lateral extrusion process. The results showed a close agreement between the numerical simulation and experimental analysis of bimetal cross fitting.},
 year = {2018}
}

Copy | Download

TY  - JOUR
T1  - Experimental and FEM Simulation Analysis of Lateral Extrusion Process on Bimetal Cross Fitting
AU  - Le Thai Hung
AU  - Do Quang Long
AU  - Le Trung Kien
AU  - Vu Xuan Hung
AU  - Pham Quang
Y1  - 2018/08/15
PY  - 2018
N1  - https://doi.org/10.11648/j.am.20180703.12
DO  - 10.11648/j.am.20180703.12
T2  - Advances in Materials
JF  - Advances in Materials
JO  - Advances in Materials
SP  - 67
EP  - 72
PB  - Science Publishing Group
SN  - 2327-252X
UR  - https://doi.org/10.11648/j.am.20180703.12
AB  - The purpose of this paper is to study combines the finite element method model and experimental on bimetal cross fitting by lateral extrusion process. Fabricating bimetallic cross fitting by lateral extrusion technique remains some difficulties like taking the product out of the die hardly, harming the die longevity since the high compressive force and friction effects. The Finite Element Method (FEM) results of bimetal cross fitting lateral extrusion process were obtained from ABAQUS software such as: Stress distribution, metal flow and influence of sleeve thickness. Numerical results were compared with the experimental results shown a good agreement. The bimetal cross fitting has been successfully fabricated by lateral extrusion process. The results showed a close agreement between the numerical simulation and experimental analysis of bimetal cross fitting.
VL  - 7
IS  - 3
ER  -

Copy | Download