The purpose of this study is to investigate an alternative method to decompose bamboo for the development of new eco-friendly materials. The effect of superheated steam treatment on the chemistry of decomposed bamboo biomass was investigated; the composition of the decomposed biomass was quantitatively determined, and its molecular structures were also evaluated by IR spectroscopy. The ability of the decomposed bamboo biomass to be molded without the use of binders was also investigated, and the mechanical properties of the molded samples were investigated by a dynamic hardness test. The raw material, consisting of bamboo powder and pure water were put into the reactor and sealed tightly. To decompose the raw material, the temperature of reactor was elevated by the ring furnace to a specified level and maintained for 10 min. After the decomposition, three types of determinations, holocellulose, α-cellulose, and lignin determination were performed for quantitative evaluation. The IR spectrum of decomposed bamboo powder was also measured by using FT-IR to evaluate the molecular structure. For investigate the ability of the decomposed bamboo powder to be molded without the use of a binder, the compression molding technique was employed. The young’s modulus of molded products was measured by using dynamic hardness tester. Quantitatively determination results revealed that, when the superheated vapor treatment was conducted in the temperature range from 200 to 220°C, a solid residue containing mostly α-cellulose and lignin was obtained. IR spectrum evaluation revealed that the cellulose was decomposed by the superheated steam at 200 °C and above. The young’s modulus of compression molding products also revealed that the lignin contained in the decomposed bamboo powder improved the thermosetting ability after the superheated water vapor treatment. These results suggested that the superheated steam treatment was effective to obtain the decomposed bamboo for the development of new eco-friendly materials.
| Published in |
Advances in Materials (Volume 4, Issue 5-1)
This article belongs to the Special Issue New Methods of Extraction and Characterization of Plant Fibers |
| DOI | 10.11648/j.am.s.2015040501.11 |
| Page(s) | 1-6 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Bamboo, Decomposition, Superheated Steam, Compression Molding
| [1] | S.H. Li，Q.Y. Zeng，Y.L. Xiao，S.Y. Fu，B.L. Zhou，“Biomimicry of bamboo bast fiber with engineering composite materials”，Materials Science and Engineering, C 3 (1995) 125-130. |
| [2] | S. Amada, Y. Ichikawa, T. Munekara, Y. Nagase and H. Shimizu, Fiber texture and mechanical graded structure of bamboo, Composites Part B, 28B (1997), 13-20. |
| [3] | J.M.O. Scurlocka, D.C. Dayton and B. Hames, Bamboo: an overlooked biomass resource? , Biomass Bioenergy 19 (2000) 229–244. |
| [4] | Khosrow Ghavami,“Bamboo as Reinforcement in structural concrete elements”，Cement & Concrete Composites, 27 (2005) 637–649. |
| [5] | K. Okubo, T. Fujii and N. Yamashita, Improvement of interfacial adhesion in bamboo polymer composite enhanced with microfibrillated cellulose, JSME International Journal Series A Solid Mechanics Material Engineering, 48 (2005) 199–204. |
| [6] | M. Dasm D. Chakraborty, Influence of alkali treatment on the fine structure and morphology of bamboo fibers, Journal of Applied Polymer Science, 102 (2006) 5050-5056 |
| [7] | R. Tokoro, D. M. Vu, K. Okubo, T. Tanaka, T. Fujii and T. Fujiura, How to improve mechanical properties of polylactic acid with bamboo fibers, Journal of Materials Science, 43 (2008) 775–787. |
| [8] | S. Suzuki, K. Okubo and T. Fujii, Development of high strength bamboo paper using parenchyma cells, High Performance Structures and Materials IV, (2008) 241-249. |
| [9] | Jain S, Kumar R, Jindal UC. Development and fracture mechanism of the bamboo/polyester resin composite, Journal of Materials Science Letters, 12 (1993) 558–560. |
| [10] | Chen X, Guo Q, Mi Y. Bamboo fibre-reinforced polypropylene composites: a study of the mechanical properties. Journal of Applied Polymer Science, 69 (1998) 1891–1899. |
| [11] | H. J. Kim, D. W. Seo, J. K. Kim and T. Fujii, Tensile properties and water absorption behavior of bamboo fiber reinforced composites, Key Engineering Materials, 306-308 (2006) 417-422. |
| [12] | M. Das, A. Pal and D. Chakraborty, Effects of mercerization of bamboo strips on mechanical properties of unidirectional sbamboo-novolac composites, Journal of Applied Polymer Science, 100 (2006) 238-244. |
| [13] | Yeng-Fong Shih, Mechanical and thermal properties of waste water bamboo husk fiber reinforced epoxy composite, Materials Science and Engineering A, 445-446 (2007) 289-295. |
APA Style
Sayaka Ikeno, Kiyotaka Obunai, Tadao Fukuta, Koichi Ozaki. (2015). Decomposition of Bamboo Powder for Eco-Friendly Material Development by Using Superheated Steams. Advances in Materials, 4(5-1), 1-6. https://doi.org/10.11648/j.am.s.2015040501.11
ACS Style
Sayaka Ikeno; Kiyotaka Obunai; Tadao Fukuta; Koichi Ozaki. Decomposition of Bamboo Powder for Eco-Friendly Material Development by Using Superheated Steams. Adv. Mater. 2015, 4(5-1), 1-6. doi: 10.11648/j.am.s.2015040501.11
AMA Style
Sayaka Ikeno, Kiyotaka Obunai, Tadao Fukuta, Koichi Ozaki. Decomposition of Bamboo Powder for Eco-Friendly Material Development by Using Superheated Steams. Adv Mater. 2015;4(5-1):1-6. doi: 10.11648/j.am.s.2015040501.11
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.am.s.2015040501.11,
author = {Sayaka Ikeno and Kiyotaka Obunai and Tadao Fukuta and Koichi Ozaki},
title = {Decomposition of Bamboo Powder for Eco-Friendly Material Development by Using Superheated Steams},
journal = {Advances in Materials},
volume = {4},
number = {5-1},
pages = {1-6},
doi = {10.11648/j.am.s.2015040501.11},
url = {https://doi.org/10.11648/j.am.s.2015040501.11},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.am.s.2015040501.11},
abstract = {The purpose of this study is to investigate an alternative method to decompose bamboo for the development of new eco-friendly materials. The effect of superheated steam treatment on the chemistry of decomposed bamboo biomass was investigated; the composition of the decomposed biomass was quantitatively determined, and its molecular structures were also evaluated by IR spectroscopy. The ability of the decomposed bamboo biomass to be molded without the use of binders was also investigated, and the mechanical properties of the molded samples were investigated by a dynamic hardness test. The raw material, consisting of bamboo powder and pure water were put into the reactor and sealed tightly. To decompose the raw material, the temperature of reactor was elevated by the ring furnace to a specified level and maintained for 10 min. After the decomposition, three types of determinations, holocellulose, α-cellulose, and lignin determination were performed for quantitative evaluation. The IR spectrum of decomposed bamboo powder was also measured by using FT-IR to evaluate the molecular structure. For investigate the ability of the decomposed bamboo powder to be molded without the use of a binder, the compression molding technique was employed. The young’s modulus of molded products was measured by using dynamic hardness tester. Quantitatively determination results revealed that, when the superheated vapor treatment was conducted in the temperature range from 200 to 220°C, a solid residue containing mostly α-cellulose and lignin was obtained. IR spectrum evaluation revealed that the cellulose was decomposed by the superheated steam at 200 °C and above. The young’s modulus of compression molding products also revealed that the lignin contained in the decomposed bamboo powder improved the thermosetting ability after the superheated water vapor treatment. These results suggested that the superheated steam treatment was effective to obtain the decomposed bamboo for the development of new eco-friendly materials.},
year = {2015}
}
TY - JOUR T1 - Decomposition of Bamboo Powder for Eco-Friendly Material Development by Using Superheated Steams AU - Sayaka Ikeno AU - Kiyotaka Obunai AU - Tadao Fukuta AU - Koichi Ozaki Y1 - 2015/06/09 PY - 2015 N1 - https://doi.org/10.11648/j.am.s.2015040501.11 DO - 10.11648/j.am.s.2015040501.11 T2 - Advances in Materials JF - Advances in Materials JO - Advances in Materials SP - 1 EP - 6 PB - Science Publishing Group SN - 2327-252X UR - https://doi.org/10.11648/j.am.s.2015040501.11 AB - The purpose of this study is to investigate an alternative method to decompose bamboo for the development of new eco-friendly materials. The effect of superheated steam treatment on the chemistry of decomposed bamboo biomass was investigated; the composition of the decomposed biomass was quantitatively determined, and its molecular structures were also evaluated by IR spectroscopy. The ability of the decomposed bamboo biomass to be molded without the use of binders was also investigated, and the mechanical properties of the molded samples were investigated by a dynamic hardness test. The raw material, consisting of bamboo powder and pure water were put into the reactor and sealed tightly. To decompose the raw material, the temperature of reactor was elevated by the ring furnace to a specified level and maintained for 10 min. After the decomposition, three types of determinations, holocellulose, α-cellulose, and lignin determination were performed for quantitative evaluation. The IR spectrum of decomposed bamboo powder was also measured by using FT-IR to evaluate the molecular structure. For investigate the ability of the decomposed bamboo powder to be molded without the use of a binder, the compression molding technique was employed. The young’s modulus of molded products was measured by using dynamic hardness tester. Quantitatively determination results revealed that, when the superheated vapor treatment was conducted in the temperature range from 200 to 220°C, a solid residue containing mostly α-cellulose and lignin was obtained. IR spectrum evaluation revealed that the cellulose was decomposed by the superheated steam at 200 °C and above. The young’s modulus of compression molding products also revealed that the lignin contained in the decomposed bamboo powder improved the thermosetting ability after the superheated water vapor treatment. These results suggested that the superheated steam treatment was effective to obtain the decomposed bamboo for the development of new eco-friendly materials. VL - 4 IS - 5-1 ER -
Information
Email: