In this paper, a compact slotted circular monopole antenna with spike shaped slots embedded in it is presented. Also, the proposed antenna has ground length limited to 33% of substrate length. This ground is provided on the back side of the antenna geometry to excite the antenna by microstrip line feed. A slotted circular patch element will be achieved by subtracting 45 degrees rotated square patch of 12mm x 12mm, and then by proper scaling. In this study the geometry is scaled separately by 60%, 40%, 20%, and finally the resultant is obtained by uniting them. This final geometry offers an ultra wide band operation. The overall size of the antenna is 30mm×32.4mm×1.6mm including finite ground feeding mechanism. The antenna operates in the frequency range from 2.5-15GHz covering FCC defined UWB band with more than 130% impedance bandwidth. Stable omni-directional radiation patterns in the desired frequency band have been obtained. Measured data fairly agree with the simulated results.
| Published in | International Journal of Wireless Communications and Mobile Computing (Volume 2, Issue 2) |
| DOI | 10.11648/j.wcmc.20140202.12 |
| Page(s) | 30-34 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Ultra Wideband, Printed Monopole Antenna, Slot Antenna, Defected Ground Structure (DGS)
| [1] | R. S. Kshetrimayum and R. Pillalamarri, “Novel UWB printed monopole antenna with tapered feed lines,” Indian Institute of Technology, Guwahati, India 2009. |
| [2] | G. Kumar and K. P. Ray, Broadband Microstrip Antennas, Artech House Boston, London, 2002. |
| [3] | J. R. Panda and R. S. Kshetrimayum, “An F-shaped printed monopole antenna for dual-band RFID and WLAN appli-cations,” Indian Institute of Technology, Guwahati, India 2010. |
| [4] | First Report and Order, Revision of part 15 of the commission's rule regarding ultra- wideband transmission systems FCC 02-48, Federal Communications Commission, 2002. |
| [5] | W.-J. Liu, Q.-X. Chu, and L.-H. Ye, “A low-profile monopole antenna embedded with a resonant slot,” Progress In Electromagnetic Re-search Letters, vol. 14, pp. 59-67, 2010. |
| [6] | K. C. gupta, R. Gerg, I. Bahl and P. Bhartia, Microstrip Lines and Slotline, Artech House, Boston, London. |
| [7] | R. S. Kshetrimayum, J. R. Panda, and R. Pillalamarri “UWB printed monopole antenna with a notch frequency for coexistence with IEEE 802.11a WLAN devices,” Indian Institute of Technology, Guwahati, India, 2009. |
| [8] | Z.-A. Zheng and Q.-X. Chu, “Compact CPW-fed UWB antenna with dual band notched characteristics,” Progress In Electromagnetics Research Letters, vol. 11, pp. 83-91, 2009. |
| [9] | N. Kushwaha and R. Kumar, “An UWB fractal antenna with defected ground structure and swastika shape electromagnetic band gap,” Progress In Electromagnetics Research B, vol. 52, pp. 383-403, 2013. |
| [10] | S. Sadat, M. Fardis, F. Geran, and G. Dadashzadeh, “A compact microstrip square-ring slot atenna for UWB applications,” Progress In Electromagnetics Research, vol. 67, pp. 173-179, 2007. |
| [11] | C.A. Balanis, Antenna Theory Analysis & Design, 3rd Edition, John Wiley & Sons, New York, 2011. |
| [12] | R. Kumar and K. K. Sawant, “Design of CPW-fed fourth iterative UWB fractal antenna,” International Journal of Microwave & Optical Technology, vol. 5, no. 6, pp. 320-327, 2010. |
| [13] | M. K. Kulkarni and V. G. Kasabegoudar, A CPW-fed triangular monopole antenna with staircase ground for UWB applications,” Int. J. Wireless Communications and Mobile Computing, vol. 1, no. 4, pp. 129-135, 2013. |
| [14] | Y.S. Li, W.X. Li and Q.B. Ye, “ Compact reconfigurable UWB antenna integrated with stepped impedance stub loaded resonators and switches,” Progress In Electromagnetics Research, vol. 27, pp. 239-252, 2007 |
| [15] | J. K. Ali, A.J. Salim, A.I. Hammoodi and H. Alsaedi, “An Ultra-wideband printed monopole antenna with a fractal based reduced ground plane,” Progress In Electromagnetics Research Symposium Proceedings, vol. 19, pp. 613-617, 2012 |
| [16] | K. R. Dharani and D. Pavithra, “ a simple miniature U-shaped slot antenna for WIMAX applications,” International Journal of Advance in Engineering & Technology, pp. 1256-1262, 2013 |
| [17] | R. Ghatak, A. Karmakar, and D.R. Poddar, “A circular shaped sierpinsik carpet fractal UWB monopole antenna with band rejection capability,” Progress In Electromagnetics Research, vol. 24, pp. 221-234, 2011. |
| [18] | HFSS13.0 User's Manual, Ansoft Corporation, Pittsburgh. |
APA Style
Gopal M. Dandime, Veeresh G. Kasabegoudar. (2014). A Slotted Circular Monopole Antenna for Wireless Applications. International Journal of Wireless Communications and Mobile Computing, 2(2), 30-34. https://doi.org/10.11648/j.wcmc.20140202.12
ACS Style
Gopal M. Dandime; Veeresh G. Kasabegoudar. A Slotted Circular Monopole Antenna for Wireless Applications. Int. J. Wirel. Commun. Mobile Comput. 2014, 2(2), 30-34. doi: 10.11648/j.wcmc.20140202.12
AMA Style
Gopal M. Dandime, Veeresh G. Kasabegoudar. A Slotted Circular Monopole Antenna for Wireless Applications. Int J Wirel Commun Mobile Comput. 2014;2(2):30-34. doi: 10.11648/j.wcmc.20140202.12
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.wcmc.20140202.12,
author = {Gopal M. Dandime and Veeresh G. Kasabegoudar},
title = {A Slotted Circular Monopole Antenna for Wireless Applications},
journal = {International Journal of Wireless Communications and Mobile Computing},
volume = {2},
number = {2},
pages = {30-34},
doi = {10.11648/j.wcmc.20140202.12},
url = {https://doi.org/10.11648/j.wcmc.20140202.12},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.wcmc.20140202.12},
abstract = {In this paper, a compact slotted circular monopole antenna with spike shaped slots embedded in it is presented. Also, the proposed antenna has ground length limited to 33% of substrate length. This ground is provided on the back side of the antenna geometry to excite the antenna by microstrip line feed. A slotted circular patch element will be achieved by subtracting 45 degrees rotated square patch of 12mm x 12mm, and then by proper scaling. In this study the geometry is scaled separately by 60%, 40%, 20%, and finally the resultant is obtained by uniting them. This final geometry offers an ultra wide band operation. The overall size of the antenna is 30mm×32.4mm×1.6mm including finite ground feeding mechanism. The antenna operates in the frequency range from 2.5-15GHz covering FCC defined UWB band with more than 130% impedance bandwidth. Stable omni-directional radiation patterns in the desired frequency band have been obtained. Measured data fairly agree with the simulated results.},
year = {2014}
}
TY - JOUR T1 - A Slotted Circular Monopole Antenna for Wireless Applications AU - Gopal M. Dandime AU - Veeresh G. Kasabegoudar Y1 - 2014/06/10 PY - 2014 N1 - https://doi.org/10.11648/j.wcmc.20140202.12 DO - 10.11648/j.wcmc.20140202.12 T2 - International Journal of Wireless Communications and Mobile Computing JF - International Journal of Wireless Communications and Mobile Computing JO - International Journal of Wireless Communications and Mobile Computing SP - 30 EP - 34 PB - Science Publishing Group SN - 2330-1015 UR - https://doi.org/10.11648/j.wcmc.20140202.12 AB - In this paper, a compact slotted circular monopole antenna with spike shaped slots embedded in it is presented. Also, the proposed antenna has ground length limited to 33% of substrate length. This ground is provided on the back side of the antenna geometry to excite the antenna by microstrip line feed. A slotted circular patch element will be achieved by subtracting 45 degrees rotated square patch of 12mm x 12mm, and then by proper scaling. In this study the geometry is scaled separately by 60%, 40%, 20%, and finally the resultant is obtained by uniting them. This final geometry offers an ultra wide band operation. The overall size of the antenna is 30mm×32.4mm×1.6mm including finite ground feeding mechanism. The antenna operates in the frequency range from 2.5-15GHz covering FCC defined UWB band with more than 130% impedance bandwidth. Stable omni-directional radiation patterns in the desired frequency band have been obtained. Measured data fairly agree with the simulated results. VL - 2 IS - 2 ER -
Information
Email: