Automation, Control and Intelligent Systems

| Peer-Reviewed |

Speed control of a DC motor using Controllers

Received: 11 August 2014    Accepted: 10 October 2014    Published: 22 November 2014
Views:       Downloads:

Share This Article

Abstract

This paper describes the speed control of a DC shunt motor using conventional controllers (PID, IMC) and Fuzzy Logic controller based on Matlab Simulation program. A mathematical model of the process has been developed using real plant data and then conventional controllers and Fuzzy logic controller has been designed. A comparative analysis of performance evaluation of all controllers has been done.

DOI 10.11648/j.acis.s.2014020601.11
Published in Automation, Control and Intelligent Systems (Volume 2, Issue 6-1, December 2014)

This article belongs to the Special Issue Impact of Gesture Recognition in the Technological Era

Page(s) 1-9
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

PID Controller, IMC, FLC, DC Motor

References
[1] Husain Ahmed and Gagansingh, “Controlling of D.C. Motor using Fuzzy Logic Controller”, Conference on Advances in Communication and Control Systems 2013 (CAC2S 2013)
[2] Katsuhiko Ogata, “Modern Control Engineering”. 5thedition 2010.
[3] M.Saranya and D.Pamela, “A Real Time IMC Tuned PID Controller for DC Motor”, International Journal of Recent Technology and Engineering, ISSN: 2277-3878, Volume-1, Issue-1, April 2012
[4] H.X.Li and S.K.Tso, "Quantitative design and analysis of Fuzzy Proportional- Integral- Derivative Control- a Step TowardsAutotuning", International journal of system science, Vol.31, No.5, 2000, pp.545-553.
[5] Zadeh, L. A., Fuzzy Sets. Information and Control, 8, 338-353, 1965.
[6] Assilian, S. and Mamdani, E.H., An Experiment in Linguistic Synthesis with a Fuzzy Logic Controller. International Journal of Man-Machine Studies, 7(1), 1-13, 1974.
[7] K.Venkateswarlu and Ch. Chengaiah “Comparative study on DC motor speed control using various controllers” Volume 1 , Issue 6 / Dec 2013
[8] AlokRanjan Singh and V.K. Giri “Design and Analysis of DC Motor Speed Control by GA Based Tuning of Fuzzy Logic Controller” International Journal of Engineering Research & Technology (IJERT), Vol. 1 Issue 5, July – 2012
[9] KiamHeongAng, Gregory Chong and Yun Li, "PID Control System Analysis, Design, and Technology," IEEE Trans., Control Syst. Technol., vol. 13, no. 4, pp. 559-576, Ju12005.
[10] Zhicheng Zhao, Jianggang Zhang and MingdongHou, “An adaptive IMC-PID control scheme based on neural network," presented at the IEEE conference, 2009.
[11] AlokRanjan Singh and V.K. Giri “Compare and simulation of speed control of DC motor using PID and Fuzzy controller” VSRD International Journal of Electrical, Electronics & Communication Engineering, Vol. 2 No. 10 October 2012
[12] Larsen P.M., Industrial application of Fuzzy Logic Control,academic press, inc., may, 1979.
[13] Zadeh L.A., Fuzzy relation Equations and Applications to Knowledge Engineering, Kluwer AcademicPublishers, Holland, 1989
Author Information
  • Electronics and Communication Engineering Department, Maryland Institute of Technology and Management, Jamshedpur, India

  • Electronics and Communication Engineering Department, Ramgovind Institute of Technology, Koderma, India

  • Electrical Engineering Department, BIT Sindri, Dhanbad, India

Cite This Article
  • APA Style

    Md Akram Ahmad, Kamal Kishor, Pankaj Rai. (2014). Speed control of a DC motor using Controllers. Automation, Control and Intelligent Systems, 2(6-1), 1-9. https://doi.org/10.11648/j.acis.s.2014020601.11

    Copy | Download

    ACS Style

    Md Akram Ahmad; Kamal Kishor; Pankaj Rai. Speed control of a DC motor using Controllers. Autom. Control Intell. Syst. 2014, 2(6-1), 1-9. doi: 10.11648/j.acis.s.2014020601.11

    Copy | Download

    AMA Style

    Md Akram Ahmad, Kamal Kishor, Pankaj Rai. Speed control of a DC motor using Controllers. Autom Control Intell Syst. 2014;2(6-1):1-9. doi: 10.11648/j.acis.s.2014020601.11

    Copy | Download

  • @article{10.11648/j.acis.s.2014020601.11,
      author = {Md Akram Ahmad and Kamal Kishor and Pankaj Rai},
      title = {Speed control of a DC motor using Controllers},
      journal = {Automation, Control and Intelligent Systems},
      volume = {2},
      number = {6-1},
      pages = {1-9},
      doi = {10.11648/j.acis.s.2014020601.11},
      url = {https://doi.org/10.11648/j.acis.s.2014020601.11},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.acis.s.2014020601.11},
      abstract = {This paper describes the speed control of a DC shunt motor using conventional controllers (PID, IMC) and Fuzzy Logic controller based on Matlab Simulation program. A mathematical model of the process has been developed using real plant data and then conventional controllers and Fuzzy logic controller has been designed. A comparative analysis of performance evaluation of all controllers has been done.},
     year = {2014}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Speed control of a DC motor using Controllers
    AU  - Md Akram Ahmad
    AU  - Kamal Kishor
    AU  - Pankaj Rai
    Y1  - 2014/11/22
    PY  - 2014
    N1  - https://doi.org/10.11648/j.acis.s.2014020601.11
    DO  - 10.11648/j.acis.s.2014020601.11
    T2  - Automation, Control and Intelligent Systems
    JF  - Automation, Control and Intelligent Systems
    JO  - Automation, Control and Intelligent Systems
    SP  - 1
    EP  - 9
    PB  - Science Publishing Group
    SN  - 2328-5591
    UR  - https://doi.org/10.11648/j.acis.s.2014020601.11
    AB  - This paper describes the speed control of a DC shunt motor using conventional controllers (PID, IMC) and Fuzzy Logic controller based on Matlab Simulation program. A mathematical model of the process has been developed using real plant data and then conventional controllers and Fuzzy logic controller has been designed. A comparative analysis of performance evaluation of all controllers has been done.
    VL  - 2
    IS  - 6-1
    ER  - 

    Copy | Download

  • Sections