International Journal of Intelligent Information Systems

| Peer-Reviewed |

Application of Radio Frequency Identification Positioning Technology in Valuables Monitoring

Received: 03 May 2016    Accepted: 13 May 2016    Published: 01 August 2016
Views:       Downloads:

Share This Article

Abstract

With the development of positioning services, an increasing number of people and companies pay attention to the management and protection of the precious goods which they possess, through the determination of its location to achieve the management purpose [1]. At present, the main positioning way is to use the global positioning system (GPS), but many of the valuable items are stored in the indoor, and it's hard to receive a satellite signal in the room, so it cannot be accurate positioning. As a new short distance wireless data recognition technology at present, Radio Frequency Identification (RFID) indoor positioning technology is very suitable for the indoor positioning. Because it has many characteristics: large amount of data storage, readable and writable, strong penetrating power, long recognition distance, fast read-write speed and the use of the characteristics of long service life and good adaptability to the environment, etc. Among the RFID indoor positioning technology of many positioning algorithms, the three sides positioning algorithm is commonly used, and more mature. At the same time, the storage space of most valuable items is simple, and the environmental factors have little influence on the signal interference. So it is feasible to use the three sides positioning algorithm of RFID positioning algorithms to locate the valuables in the indoor.

DOI 10.11648/j.ijiis.20160504.12
Published in International Journal of Intelligent Information Systems (Volume 5, Issue 4, August 2016)
Page(s) 55-59
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

RFID Technology, Valuables, Monitoring System, Positioning Algorithm

References
[1] Danshi Sun, Li Yang. ZigBee Positioning Technology in Valuables Monitoring [J]. Geomatics & Spatial Information Technology, 2015, 07: 191-192.
[2] Xiuli Ma, Xiulian Wang, Libo Wei. Design of monitoring and management system for valuables based on RFID [J]. Automatic identification technology of China, 2009, 01: 21-24.
[3] Desheng Zhang. Application of RFID technology in the management of firearms [J]. National Defense Technology Foundation. 2008, 11: 41-44.
[4] Arnitz D, Reynolds M S. Multitransmiter wireles power transfer optimization for backscater RFID transponders [J]. Antennas and Wireles Propagation Leters, IEEE, 2013, 12 (4): 849-852.
[5] Li X, Zhang Y, Amin M G. Multifrequency-based range esti- mation of RFID tags [C]//Proc of 2009IEEE International Conference on RFID, IEEE, 2009: 147-154.
[6] Yu Shu, Jiang Wu, Donghui Li, Huiying Kuang. Research on the application of active RFID location algorithm in firearms control system [J]. Mobile Communication. 2015, 10: 61-65.
[7] K. Pahlavan, X. Li, and J. P. Makela. Indoor geolocation science and technology. IEEE Commun. Mag., vol. 40, no. 2, pp. 112-118, Feb. 2002.
[8] Junmin Bai. Research and design of firearms dynamic monitoring system based on RFID Technology [D]. Xi'an Electronic Technology University. 2014
[9] Wenjian Wu, Jin Liu, Helin Li, Bing Kong. An improved weighted three edge location algorithm [J]. Journal of Zhengzhou University of Light Industry (NATURAL SCIENCE EDITION). 2012, 03: 83-85.
[10] Peigang Sun, Hai Zhao, Guangjie Han, Xiyuan Zhang, Jian Zhu. Chaotic triangular positioning reference point selection algorithm [J]. Computer Research and Development. 2007, 12: 1987-1995.
Author Information
  • School of information, Beijing Wuzi University, Beijing, China

  • School of information, Beijing Wuzi University, Beijing, China

  • School of information, Beijing Wuzi University, Beijing, China

  • School of information, Beijing Wuzi University, Beijing, China

Cite This Article
  • APA Style

    Guicheng Shen, Kunlun Wang, Chaofan Su, Juntao Li. (2016). Application of Radio Frequency Identification Positioning Technology in Valuables Monitoring. International Journal of Intelligent Information Systems, 5(4), 55-59. https://doi.org/10.11648/j.ijiis.20160504.12

    Copy | Download

    ACS Style

    Guicheng Shen; Kunlun Wang; Chaofan Su; Juntao Li. Application of Radio Frequency Identification Positioning Technology in Valuables Monitoring. Int. J. Intell. Inf. Syst. 2016, 5(4), 55-59. doi: 10.11648/j.ijiis.20160504.12

    Copy | Download

    AMA Style

    Guicheng Shen, Kunlun Wang, Chaofan Su, Juntao Li. Application of Radio Frequency Identification Positioning Technology in Valuables Monitoring. Int J Intell Inf Syst. 2016;5(4):55-59. doi: 10.11648/j.ijiis.20160504.12

    Copy | Download

  • @article{10.11648/j.ijiis.20160504.12,
      author = {Guicheng Shen and Kunlun Wang and Chaofan Su and Juntao Li},
      title = {Application of Radio Frequency Identification Positioning Technology in Valuables Monitoring},
      journal = {International Journal of Intelligent Information Systems},
      volume = {5},
      number = {4},
      pages = {55-59},
      doi = {10.11648/j.ijiis.20160504.12},
      url = {https://doi.org/10.11648/j.ijiis.20160504.12},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ijiis.20160504.12},
      abstract = {With the development of positioning services, an increasing number of people and companies pay attention to the management and protection of the precious goods which they possess, through the determination of its location to achieve the management purpose [1]. At present, the main positioning way is to use the global positioning system (GPS), but many of the valuable items are stored in the indoor, and it's hard to receive a satellite signal in the room, so it cannot be accurate positioning. As a new short distance wireless data recognition technology at present, Radio Frequency Identification (RFID) indoor positioning technology is very suitable for the indoor positioning. Because it has many characteristics: large amount of data storage, readable and writable, strong penetrating power, long recognition distance, fast read-write speed and the use of the characteristics of long service life and good adaptability to the environment, etc. Among the RFID indoor positioning technology of many positioning algorithms, the three sides positioning algorithm is commonly used, and more mature. At the same time, the storage space of most valuable items is simple, and the environmental factors have little influence on the signal interference. So it is feasible to use the three sides positioning algorithm of RFID positioning algorithms to locate the valuables in the indoor.},
     year = {2016}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Application of Radio Frequency Identification Positioning Technology in Valuables Monitoring
    AU  - Guicheng Shen
    AU  - Kunlun Wang
    AU  - Chaofan Su
    AU  - Juntao Li
    Y1  - 2016/08/01
    PY  - 2016
    N1  - https://doi.org/10.11648/j.ijiis.20160504.12
    DO  - 10.11648/j.ijiis.20160504.12
    T2  - International Journal of Intelligent Information Systems
    JF  - International Journal of Intelligent Information Systems
    JO  - International Journal of Intelligent Information Systems
    SP  - 55
    EP  - 59
    PB  - Science Publishing Group
    SN  - 2328-7683
    UR  - https://doi.org/10.11648/j.ijiis.20160504.12
    AB  - With the development of positioning services, an increasing number of people and companies pay attention to the management and protection of the precious goods which they possess, through the determination of its location to achieve the management purpose [1]. At present, the main positioning way is to use the global positioning system (GPS), but many of the valuable items are stored in the indoor, and it's hard to receive a satellite signal in the room, so it cannot be accurate positioning. As a new short distance wireless data recognition technology at present, Radio Frequency Identification (RFID) indoor positioning technology is very suitable for the indoor positioning. Because it has many characteristics: large amount of data storage, readable and writable, strong penetrating power, long recognition distance, fast read-write speed and the use of the characteristics of long service life and good adaptability to the environment, etc. Among the RFID indoor positioning technology of many positioning algorithms, the three sides positioning algorithm is commonly used, and more mature. At the same time, the storage space of most valuable items is simple, and the environmental factors have little influence on the signal interference. So it is feasible to use the three sides positioning algorithm of RFID positioning algorithms to locate the valuables in the indoor.
    VL  - 5
    IS  - 4
    ER  - 

    Copy | Download

  • Sections