Pure and Applied Mathematics Journal

| Peer-Reviewed |

The Singular Function Boundary Integral Method for the 2-D and 3-D Laplace Equation Problems in Mechanics, with a Boundary Singularity

Received: 03 October 2016    Accepted: 15 October 2016    Published: 10 November 2016
Views:       Downloads:

Share This Article

Abstract

In this study the Singular Function Boundary Integral Method (SFBIM) is implemented in the case of a planar elliptic boundary value problem in Mechanics, with a point boundary singularity. The method is also extended in the case of a typical problem of Solid Mechanics, concerning the Laplace equation problem in three dimensions, defined in a domain with a straight edge singularity on the surface boundary. In both the 2-D and 3-D cases, the general solution of the Laplace equation is approximated by the leading terms (which contain the singular functions) of the local asymptotic solution expansion. The singular functions are used to weight the governing equation in the Galerkin sense. For the 2-D Laplacian model problem of this study, which is defined over a domain with a re-entrant corner, the resulting discretized equations are reduced to boundary integrals by means of Green’s second identity. For the 3-D model problem of this work, the volume integrals of the discretized equations are reduced to surface integrals by implementing Gauss’ divergence theorem. The Dirichlet boundary conditions are then weakly enforced by means of Lagrange multipliers. The values of the latter are calculated together with the singular coefficients, in the 2-D case or the Edge Flux Intensity Functions (EFIFs), in the 3-D model problem, which appear in the local solution expansion. For the planar problem, the numerical results are favorably compared with the analytic solution. Especially for the extension of the method in three dimensions, the preliminary numerical results compare favorably with available post-processed finite element results.

DOI 10.11648/j.pamj.20160506.14
Published in Pure and Applied Mathematics Journal (Volume 5, Issue 6, December 2016)
Page(s) 192-204
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Laplace Equation, Boundary Singularity, Straight Edge Singularity, Singular Coefficients, Edge Flux Intensity Functions, Singular Function Boundary Integral Method

References
[1] Babuška I, Guo B (1986), “The h-p version of the finite element method –Part1: The basic approximation results”, Comput. Mech. 1, 21-41.
[2] Babuška I, Miller A (1984), “The post-processing approach in the finite element method – Part 1: Calculation of displacements, stresses and other higher order derivatives of the displacements”, Int. J. Numer. Meth. Eng. 20, 1085-1109.
[3] Babuška I, Miller A (1984), “The post-processing approach in the finite element method – Part 2: The calculation of the stress intensity factors”, Int. J. Numer. Meth. Eng. 20, 1111-1129.
[4] Beskos DE, Maier G (2003), Boundary Element Advances in Solid Mechanics, Springer, Wien, NY.
[5] Brenner SC (1999), “Multigrid methods for the computation of singular solutions and stress intensity factors I: corner singularities”, Math. Comput. 68, 559-583.
[6] Christodoulou E, Elliotis M, Xenophontos C, Georgiou G (2012), “The Singular Function Boundary Integral Method for a 3-D Laplacian problem with a boundary straight edge singularity,” Appl. Math. Comput. 219, 1073-1081.
[7] Costabel M, Dauge M, Yosibash Z (2004), “A quasidual function method for extracting edge stress intensity functions”, SIAM J. Math. Anal. 35 (5), 1177-1202.
[8] Li ZC, Lu TT (2000), “Singularities and treatments of elliptic boundary value problems”, Math. Comp. Model. 31, 97-145.
[9] Elliotis M, Georgiou G, Xenophontos C (2002), “The solution of a Laplacian problem over an L-shaped domain with a singular function boundary integral method”, Comm. Numer. Methods Eng. 18, 213-222.
[10] Elliotis M, Georgiou G, Xenophontos C (2005), “Solving Laplacian problems with boundary singularities: A comparison of a singular function boundary integral method with the p/hp version of the finite element method”, Appl. Math. Comput. 169, 485-499.
[11] Elliotis M, Georgiou G, Xenophontos C (2005), “Solution of the planar Newtonian stick-slip problem with the singular function boundary integral method”, Int. J. Numer. Meth. Fluids 48, 1000-1021.
[12] Elliotis M, Georgiou G, Xenophontos C (2006), “The singular function boundary integral method for a two-dimensional fracture problem”, Engineering Analysis with Boundary Elements 30, 100-106.
[13] Elliotis M, Christodoulou E, Georgiou G, Xenophontos C (2010), “The Singular Function Boundary Integral Method for a 3-D Laplacian problem with an edge singularity,” in Recent Developments in Boundary Element Methods (special edition to honor Prof. John Katsikadelis), E. J. Sapountzakis (Ed.), WIT Press, Southampton, 31-42.
[14] Elliotis M, Charmpis D, Georgiou G (2014), “The Singular Function Boundary Integral Method for an elastic plane stress wedge beam problem with a point boundary singularity,” Appl. Math. Comput. 248, 93-100.
[15] Fritz J (1982), Partial Differential Equations, Springer -Verlang, Inc., NY.
[16] Fung YC (1977), Foundations of solid mechanics, Prentice Hall, Inc., NJ.
[17] Georgiou GC, Boudouvis A, Poullikkas A (1999), “Comparison of two methods for the computation of a singular solution in elliptic problems”, J. Comp. Appl. Math., 79, 277-290.
[18] Georgiou GC, Olson LG, Schultz WW, Sagan S (1989), “A singular finite element for Stoke’ s flow: the stick-slip problem”, Int. J. Numer. Meth. Fluids 9, 1353-1367.
[19] Georgiou GC, Olson LG, Smyrlis Y (1996), “A singular function boundary integral method for the Laplace equation”, Comm. Numer. Methods Eng. 12, 127-134.
[20] Grisvard P (1985), Elliptic problems in non-smooth domains, Pitman Publishers, UK.
[21] Huber O, Nickel J, Kuhn G (1993), “On the decomposition of the J-integral for 3-D crack problems”, Int. J. Fracture 64 (4), 339-348.
[22] Katsikadelis JT, Armenakas AE (1984), “Plates on elastic Foundation by the Boundary Integral Equation Method”, ASCE J. Eng. Mech. 110, 1086-1105.
[23] Meda G, Messner TW, Sinclair GB, Solecki JS (1998), “Path-independent H integrals for three-dimensional fracture mechanics”, Int. J. Fracture 94 (3), 217-234.
[24] Olson LG, Georgiou GC, Schultz WW (1991), “An efficient finite element method for treating singularities in Laplace’s equation”, J. Comp. Physics 96, 391-410.
[25] Szabó B, Babuška I (1991), Finite Element Analysis, John Wiley & Sons, Inc., NY.
[26] Trefftz E (1926), “Ein Gegenstuck zum Ritz’ schen Verfahren”, Proc. Second Int. Cong. Appl. Mech., Zurch, 131-137.
[27] Weiss D., Yosibash Z. (2014), “Uncertainty quantification for a 1D thermo-hyperelastic coupled problem using polynomial chaos projection and p-FEMs”, Computers and Mathematics with Applications, 70, 1701-1720.
[28] Xenophontos C, Elliotis M, Georgiou G (2006), “A singular function boundary integral method for Lapacian problems with boundary singularities”, SIAM J. Sci. Comp. 28, 517-532.
[29] Young DM, Gregory RT (1988), A survey of numerical mathematics, Dover Publications, Inc., NY.
[30] Yosibash Z, Actis R, Szabo B (2002), “Extracting edge flux intensity functions for the Laplacian”, Int. J. Numer. Meth. Eng. 53, 225-242.
[31] Yosibash Z. (2011), Singularities in Elliptic Boundary Value Problems and Elasticity and their Connection with Failure Initiation, Springer, Berlin.
[32] Yosibash Z., Shannon S. (2014), “Computing edge stress intensity functions (ESIFs) along circular 3-D edges”, Engineering Fracture Mechanics, 117, 127-151.
[33] Yosibash Z., Mittelman B. (2016), “A 3-D Failure Initiation Criterion from a Sharp V-notch Edge in Elastic Brittle Structures”, European Journal of Mechanics - A/Solids, 60, 70-94.
[34] Yosibash Z., Weiss D., Hartmann S. (2014), “High-order FEMs for thermo-hyperelasticity at finite strains”, Computers and Mathematics with Applications, 67, 477-496.
[35] Yosibash Z., Mittelman B. (2016), “A Revised Failure Criterion for Brittle Elastic Materials Under Mixed-mode Loading in 2-D”, Theoretical and Applied Fracture Mechanics, Accepted.
[36] Zaltzman T., Yosibash Z. (2011), “Vertex singularities associated with conical points for the 3-D Laplace equation”, Numer. Methods PDEs 27, 662–679.
Author Information
  • Department of Mathematics and Statistics, University of Cyprus, Nicosia, Cyprus

Cite This Article
  • APA Style

    Miltiades C. Elliotis. (2016). The Singular Function Boundary Integral Method for the 2-D and 3-D Laplace Equation Problems in Mechanics, with a Boundary Singularity. Pure and Applied Mathematics Journal, 5(6), 192-204. https://doi.org/10.11648/j.pamj.20160506.14

    Copy | Download

    ACS Style

    Miltiades C. Elliotis. The Singular Function Boundary Integral Method for the 2-D and 3-D Laplace Equation Problems in Mechanics, with a Boundary Singularity. Pure Appl. Math. J. 2016, 5(6), 192-204. doi: 10.11648/j.pamj.20160506.14

    Copy | Download

    AMA Style

    Miltiades C. Elliotis. The Singular Function Boundary Integral Method for the 2-D and 3-D Laplace Equation Problems in Mechanics, with a Boundary Singularity. Pure Appl Math J. 2016;5(6):192-204. doi: 10.11648/j.pamj.20160506.14

    Copy | Download

  • @article{10.11648/j.pamj.20160506.14,
      author = {Miltiades C. Elliotis},
      title = {The Singular Function Boundary Integral Method for the  2-D and 3-D Laplace Equation Problems in Mechanics, with a Boundary Singularity},
      journal = {Pure and Applied Mathematics Journal},
      volume = {5},
      number = {6},
      pages = {192-204},
      doi = {10.11648/j.pamj.20160506.14},
      url = {https://doi.org/10.11648/j.pamj.20160506.14},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.pamj.20160506.14},
      abstract = {In this study the Singular Function Boundary Integral Method (SFBIM) is implemented in the case of a planar elliptic boundary value problem in Mechanics, with a point boundary singularity. The method is also extended in the case of a typical problem of Solid Mechanics, concerning the Laplace equation problem in three dimensions, defined in a domain with a straight edge singularity on the surface boundary. In both the 2-D and 3-D cases, the general solution of the Laplace equation is approximated by the leading terms (which contain the singular functions) of the local asymptotic solution expansion. The singular functions are used to weight the governing equation in the Galerkin sense. For the 2-D Laplacian model problem of this study, which is defined over a domain with a re-entrant corner, the resulting discretized equations are reduced to boundary integrals by means of Green’s second identity. For the 3-D model problem of this work, the volume integrals of the discretized equations are reduced to surface integrals by implementing Gauss’ divergence theorem. The Dirichlet boundary conditions are then weakly enforced by means of Lagrange multipliers. The values of the latter are calculated together with the singular coefficients, in the 2-D case or the Edge Flux Intensity Functions (EFIFs), in the 3-D model problem, which appear in the local solution expansion. For the planar problem, the numerical results are favorably compared with the analytic solution. Especially for the extension of the method in three dimensions, the preliminary numerical results compare favorably with available post-processed finite element results.},
     year = {2016}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - The Singular Function Boundary Integral Method for the  2-D and 3-D Laplace Equation Problems in Mechanics, with a Boundary Singularity
    AU  - Miltiades C. Elliotis
    Y1  - 2016/11/10
    PY  - 2016
    N1  - https://doi.org/10.11648/j.pamj.20160506.14
    DO  - 10.11648/j.pamj.20160506.14
    T2  - Pure and Applied Mathematics Journal
    JF  - Pure and Applied Mathematics Journal
    JO  - Pure and Applied Mathematics Journal
    SP  - 192
    EP  - 204
    PB  - Science Publishing Group
    SN  - 2326-9812
    UR  - https://doi.org/10.11648/j.pamj.20160506.14
    AB  - In this study the Singular Function Boundary Integral Method (SFBIM) is implemented in the case of a planar elliptic boundary value problem in Mechanics, with a point boundary singularity. The method is also extended in the case of a typical problem of Solid Mechanics, concerning the Laplace equation problem in three dimensions, defined in a domain with a straight edge singularity on the surface boundary. In both the 2-D and 3-D cases, the general solution of the Laplace equation is approximated by the leading terms (which contain the singular functions) of the local asymptotic solution expansion. The singular functions are used to weight the governing equation in the Galerkin sense. For the 2-D Laplacian model problem of this study, which is defined over a domain with a re-entrant corner, the resulting discretized equations are reduced to boundary integrals by means of Green’s second identity. For the 3-D model problem of this work, the volume integrals of the discretized equations are reduced to surface integrals by implementing Gauss’ divergence theorem. The Dirichlet boundary conditions are then weakly enforced by means of Lagrange multipliers. The values of the latter are calculated together with the singular coefficients, in the 2-D case or the Edge Flux Intensity Functions (EFIFs), in the 3-D model problem, which appear in the local solution expansion. For the planar problem, the numerical results are favorably compared with the analytic solution. Especially for the extension of the method in three dimensions, the preliminary numerical results compare favorably with available post-processed finite element results.
    VL  - 5
    IS  - 6
    ER  - 

    Copy | Download

  • Sections