Synthesis Time and Temperature Effect on Polyaniline Morphology and Conductivity

Palash Chandra Maity; Mudrika Khandelwal

doi:doi:10.11648/j.ajmsp.20160104.11

| Peer-Reviewed

Synthesis Time and Temperature Effect on Polyaniline Morphology and Conductivity

Palash Chandra Maity, Mudrika Khandelwal

Published in American Journal of Materials Synthesis and Processing (Volume 1, Issue 4)

Received: 2 September 2016 Accepted: 26 September 2016 Published: 1 November 2016

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

This paper studies the effect of time and temperature of polymerisation on morphology and conductivity of polyaniline which is produced by oxidative polymerisation. It has been reported that with decrease in temperature and increase in polymerisation duration, the yield and particle size increases. The polyaniline particles are rod-like at the onset of polymerisation and also at low polymerisation temperature. The conductivity has been determined by four-point measurement with incorporation of correction factor. It was found that the electrical conductivity varies from below 0.5 S/cm to over 11 S/cm with variation in duration and temperature of polymerization. Conductivity is proposed to be dependent on the particle size as conductivity increases with decrease in polymerisation temperature and increase in polymerisation duration, similar to the trend observed for particle size. This may be indicative of equal probability of inter- chain and intra-chain charge transport.

Published in	American Journal of Materials Synthesis and Processing (Volume 1, Issue 4)
DOI	10.11648/j.ajmsp.20160104.11
Page(s)	37-42
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Polyaniline, Four-Point Conductivity, Morphology, Time Temperature Effect

References

[1]	Ramakrishnan, S., From a laboratory curiosity to the market place. Resonance, 2011. 16 (12): p. 1254-1265.
[2]	MacDiarmid, A. G., Synthetic metals: a novel role for organic polymers. Synthetic Metals, 2001. 125 (1): p. 11-22.
[3]	Yoo, J. E., et al., Improving the electrical conductivity of polymer acid-doped polyaniline by controlling the template molecular weight. Journal of Materials Chemistry, 2007. 17 (13): p. 1268-1275.
[4]	Moon, H.-S. and J.-K. Park, Structural effect of polymeric acid dopants on the characteristics of doped polyaniline composites. Synthetic Metals, 1998. 92 (3): p. 223-228.
[5]	Zhang, X., et al., Synthetic process engineered polyaniline nanostructures with tunable morphology and physical properties. Polymer, 2012. 53 (10): p. 2109-2120.
[6]	Li, Y., et al., Polyaniline micro-/nanostructures: morphology control and formation mechanism exploration. Chemical Papers, 2013. 67 (8): p. 876-890.
[7]	Bandgar, D., et al., Facile and novel route for preparation of nanostructured polyaniline (PANi) thin films. Applied Nanoscience, 2014. 4 (1): p. 27-36.
[8]	Gospodinova, N. and L. Terlemezyan, Conducting polymers prepared by oxidative polymerization: polyaniline. Progress in Polymer Science, 1998. 23 (8): p. 1443-1484.
[9]	MacDiarmid, A. G. and A. J. Epstein, Polyaniline: Synthesis, Chemistry and Processing. 1992, DTIC Document.
[10]	Boara, G. and M. Sparpaglione, Synthesis of polyanilines with high electrical conductivity. Synthetic metals, 1995. 72 (2): p. 135-140.
[11]	Adams, P., et al., Low temperature synthesis of high molecular weight polyaniline. Polymer, 1996. 37 (15): p. 3411-3417.
[12]	Stejskal, J., et al., The effect of polymerization temperature on molecular weight, crystallinity, and electrical conductivity of polyaniline. Synthetic Metals, 1998. 96 (1): p. 55-61.
[13]	Stejskal, J. and R. Gilbert, Polyaniline. Preparation of a conducting polymer (IUPAC technical report). Pure and Applied Chemistry, 2002. 74 (5): p. 857-867.
[14]	Benabdellah, A., et al., Effects of The Synthesis Temperature on Electrical Properties of Polyaniline and their Electrochemical Characteristics onto Silver Cavity Microelectrode Ag/C-EM. Int. J. Electrochem. Sci, 2011. 6: p. 1747-1759.
[15]	1Macdiarmid, A. G. and A. J. Epstein. Polyaniline: interrelationships between molecular weight, morphology, Donnan potential and conductivity. in MRS Proceedings. 1992. Cambridge Univ Press.
[16]	Vivekanandan, J., et al., Synthesis, characterization and conductivity study of polyaniline prepared by chemical oxidative and electrochemical methods. Archives of Applied Science Research, 2011. 3 (6): p. 147-153.
[17]	Atassi, Y., M. Tally, and M. Ismail, Synthesis and characterization of chloride doped polyaniline by bulk oxidative chemical polymerization. Doping effect on electrical conductivity. arXiv preprint arXiv:0809.3552, 2008.
[18]	Gomes, E. and M. Oliveira, Chemical polymerization of aniline in hydrochloric acid (HCl) and formic acid (HCOOH) media. Differences between the two synthesized polyanilines. Am. J. Polym. Sci, 2012. 2 (2): p. 5-13.
[19]	1Tran, H. D., et al., The oxidation of aniline to produce “polyaniline”: a process yielding many different nanoscale structures. Journal of Materials Chemistry, 2011. 21 (11): p. 3534-3550.
[20]	Chao, D., et al., SEM study of the morphology of high molecular weight polyaniline. Synthetic metals, 2005. 150 (1): p. 47-51.
[21]	Konyushenko, E. N., et al., Polymerization of aniline in ice. Synthetic Metals, 2008. 158 (21): p. 927-933.
[22]	Bandgar, D., et al., Simple and low-temperature polyaniline-based flexible ammonia sensor: a step towards laboratory synthesis to economical device design. Journal of Materials Chemistry C, 2015. 3 (36): p. 9461-9468.
[23]	Šeděnková, I., et al., Solid-state oxidation of aniline hydrochloride with various oxidants. Synthetic Metals, 2011. 161 (13): p. 1353-1360.
[24]	Ćirić-Marjanović, G., Recent advances in polyaniline research: Polymerization mechanisms, structural aspects, properties and applications. Synthetic metals, 2013. 177: p. 1-47.
[25]	2MacDiarmid, A., et al., Polyaniline: Electrochemistry and application to rechargeable batteries. Synthetic Metals, 1987. 18 (1): p. 393-398.
[26]	Trchová, M. and J. Stejskal, Polyaniline: the infrared spectroscopy of conducting polymer nanotubes (IUPAC Technical Report). Pure and Applied Chemistry, 2011. 83 (10): p. 1803-1817.
[27]	Pethe, S. M. and S. B. Kondawar, Optical and electrical properties of conducting polyaniline nanofibers synthesized by interfacial and rapid mixing polymerization. Advanced Materials Letters, 2014. 5 (12): p. 728-733.
[28]	Hafizah, M. E., A. Bimantoro, and A. Manaf, Synthesized of Conductive Polyaniline by Solution Polymerization Technique. Procedia Chemistry, 2016. 19: p. 162-165.
[29]	Kim, C., W. Oh, and J.-W. Park, Solid/liquid interfacial synthesis of high conductivity polyaniline. RSC Advances, 2016. 6 (86): p. 82721-82725.
[30]	Schroder, D. K., Semiconductor material and device characterization. 2006: John Wiley & Sons.
[31]	Valdes, L. B., Resistivity measurements on germanium for transistors. Proceedings of the IRE, 1954. 42 (2): p. 420-427.
[32]	Smits, F., Measurement of sheet resistivities with the four‐point probe. Bell System Technical Journal, 1958. 37 (3): p. 711-718.
[33]	Miccoli, I., et al., The 100th anniversary of the four-point probe technique: the role of probe geometries in isotropic and anisotropic systems. Journal of Physics: Condensed Matter, 2015. 27 (22): p. 223201.
[34]	Fu, Y. and R. L. Elsenbaumer, Thermochemistry and kinetics of chemical polymerization of aniline determined by solution calorimetry. Chemistry of materials, 1994. 6 (5): p. 671-677.
[35]	Khan, R., et al., Spectroscopic, kinetic studies of polyaniline-flyash composite. Advances in Chemical Engineering and Science, 2011. 1 (02): p. 37.
[36]	Abdolahi, A., et al., Synthesis of uniform polyaniline nanofibers through interfacial polymerization. Materials, 2012. 5 (8): p. 1487-1494.
[37]	Huang, J. and R. B. Kaner, The intrinsic nanofibrillar morphology of polyaniline. Chemical Communications, 2006 (4): p. 367-376.
[38]	3Shishov, M. A., V. A. Moshnikov, and I. Y. Sapurina, Self-organization of polyaniline during oxidative polymerization: formation of granular structure. Chemical Papers, 2013. 67 (8): p. 909-918.
[39]	Zakaria, Z., et al., Effect of Hydrochloric Acid Concentration on Morphology of Polyaniline Nanofibers Synthesized by Rapid Mixing Polymerization. Journal of Nanomaterials, 2015. 2015.
[40]	Rezaei, F., N. P. Tavandashti, and A. R. Zahedi, Morphology of polyaniline nanofibers synthesized under different conditions. Research on Chemical Intermediates, 2014. 40 (3): p. 1233-1247.
[41]	Ohtani, A., et al., Synthesis and properties of high-molecular-weight soluble polyaniline and its application to the 4MB-capacity barium ferrite floppy disk's antistatic coating. Synthetic metals, 1993. 57 (1): p. 3696-3701.
[42]	Adams, P. and A. Monkman, Characterization of high molecular weight polyaniline synthesized at− 40°C using a 0.25: 1 mole ratio of persulfate oxidant to aniline. Synthetic metals, 1997. 87 (2): p. 165-169.

Cite This Article

Plain Text BibTeX RIS

APA Style

Palash Chandra Maity, Mudrika Khandelwal. (2016). Synthesis Time and Temperature Effect on Polyaniline Morphology and Conductivity. American Journal of Materials Synthesis and Processing, 1(4), 37-42. https://doi.org/10.11648/j.ajmsp.20160104.11

Copy | Download

ACS Style

Palash Chandra Maity; Mudrika Khandelwal. Synthesis Time and Temperature Effect on Polyaniline Morphology and Conductivity. Am. J. Mater. Synth. Process. 2016, 1(4), 37-42. doi: 10.11648/j.ajmsp.20160104.11

Copy | Download

AMA Style

Palash Chandra Maity, Mudrika Khandelwal. Synthesis Time and Temperature Effect on Polyaniline Morphology and Conductivity. Am J Mater Synth Process. 2016;1(4):37-42. doi: 10.11648/j.ajmsp.20160104.11

Copy | Download

@article{10.11648/j.ajmsp.20160104.11,
  author = {Palash Chandra Maity and Mudrika Khandelwal},
  title = {Synthesis Time and Temperature Effect on Polyaniline Morphology and Conductivity},
  journal = {American Journal of Materials Synthesis and Processing},
  volume = {1},
  number = {4},
  pages = {37-42},
  doi = {10.11648/j.ajmsp.20160104.11},
  url = {https://doi.org/10.11648/j.ajmsp.20160104.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmsp.20160104.11},
  abstract = {This paper studies the effect of time and temperature of polymerisation on morphology and conductivity of polyaniline which is produced by oxidative polymerisation. It has been reported that with decrease in temperature and increase in polymerisation duration, the yield and particle size increases. The polyaniline particles are rod-like at the onset of polymerisation and also at low polymerisation temperature. The conductivity has been determined by four-point measurement with incorporation of correction factor. It was found that the electrical conductivity varies from below 0.5 S/cm to over 11 S/cm with variation in duration and temperature of polymerization. Conductivity is proposed to be dependent on the particle size as conductivity increases with decrease in polymerisation temperature and increase in polymerisation duration, similar to the trend observed for particle size. This may be indicative of equal probability of inter- chain and intra-chain charge transport.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Synthesis Time and Temperature Effect on Polyaniline Morphology and Conductivity
AU  - Palash Chandra Maity
AU  - Mudrika Khandelwal
Y1  - 2016/11/01
PY  - 2016
N1  - https://doi.org/10.11648/j.ajmsp.20160104.11
DO  - 10.11648/j.ajmsp.20160104.11
T2  - American Journal of Materials Synthesis and Processing
JF  - American Journal of Materials Synthesis and Processing
JO  - American Journal of Materials Synthesis and Processing
SP  - 37
EP  - 42
PB  - Science Publishing Group
SN  - 2575-1530
UR  - https://doi.org/10.11648/j.ajmsp.20160104.11
AB  - This paper studies the effect of time and temperature of polymerisation on morphology and conductivity of polyaniline which is produced by oxidative polymerisation. It has been reported that with decrease in temperature and increase in polymerisation duration, the yield and particle size increases. The polyaniline particles are rod-like at the onset of polymerisation and also at low polymerisation temperature. The conductivity has been determined by four-point measurement with incorporation of correction factor. It was found that the electrical conductivity varies from below 0.5 S/cm to over 11 S/cm with variation in duration and temperature of polymerization. Conductivity is proposed to be dependent on the particle size as conductivity increases with decrease in polymerisation temperature and increase in polymerisation duration, similar to the trend observed for particle size. This may be indicative of equal probability of inter- chain and intra-chain charge transport.
VL  - 1
IS  - 4
ER  -

Copy | Download

Author Information

Palash Chandra Maity

Department of Materials Science and Metallurgical Engineering, Indian Institute of Technology Hyderabad, India
Mudrika Khandelwal

Department of Materials Science and Metallurgical Engineering, Indian Institute of Technology Hyderabad, India

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Palash Chandra Maity, Mudrika Khandelwal. (2016). Synthesis Time and Temperature Effect on Polyaniline Morphology and Conductivity. American Journal of Materials Synthesis and Processing, 1(4), 37-42. https://doi.org/10.11648/j.ajmsp.20160104.11

Copy | Download

ACS Style

Palash Chandra Maity; Mudrika Khandelwal. Synthesis Time and Temperature Effect on Polyaniline Morphology and Conductivity. Am. J. Mater. Synth. Process. 2016, 1(4), 37-42. doi: 10.11648/j.ajmsp.20160104.11

Copy | Download

AMA Style

Palash Chandra Maity, Mudrika Khandelwal. Synthesis Time and Temperature Effect on Polyaniline Morphology and Conductivity. Am J Mater Synth Process. 2016;1(4):37-42. doi: 10.11648/j.ajmsp.20160104.11

Copy | Download

@article{10.11648/j.ajmsp.20160104.11,
  author = {Palash Chandra Maity and Mudrika Khandelwal},
  title = {Synthesis Time and Temperature Effect on Polyaniline Morphology and Conductivity},
  journal = {American Journal of Materials Synthesis and Processing},
  volume = {1},
  number = {4},
  pages = {37-42},
  doi = {10.11648/j.ajmsp.20160104.11},
  url = {https://doi.org/10.11648/j.ajmsp.20160104.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmsp.20160104.11},
  abstract = {This paper studies the effect of time and temperature of polymerisation on morphology and conductivity of polyaniline which is produced by oxidative polymerisation. It has been reported that with decrease in temperature and increase in polymerisation duration, the yield and particle size increases. The polyaniline particles are rod-like at the onset of polymerisation and also at low polymerisation temperature. The conductivity has been determined by four-point measurement with incorporation of correction factor. It was found that the electrical conductivity varies from below 0.5 S/cm to over 11 S/cm with variation in duration and temperature of polymerization. Conductivity is proposed to be dependent on the particle size as conductivity increases with decrease in polymerisation temperature and increase in polymerisation duration, similar to the trend observed for particle size. This may be indicative of equal probability of inter- chain and intra-chain charge transport.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Synthesis Time and Temperature Effect on Polyaniline Morphology and Conductivity
AU  - Palash Chandra Maity
AU  - Mudrika Khandelwal
Y1  - 2016/11/01
PY  - 2016
N1  - https://doi.org/10.11648/j.ajmsp.20160104.11
DO  - 10.11648/j.ajmsp.20160104.11
T2  - American Journal of Materials Synthesis and Processing
JF  - American Journal of Materials Synthesis and Processing
JO  - American Journal of Materials Synthesis and Processing
SP  - 37
EP  - 42
PB  - Science Publishing Group
SN  - 2575-1530
UR  - https://doi.org/10.11648/j.ajmsp.20160104.11
AB  - This paper studies the effect of time and temperature of polymerisation on morphology and conductivity of polyaniline which is produced by oxidative polymerisation. It has been reported that with decrease in temperature and increase in polymerisation duration, the yield and particle size increases. The polyaniline particles are rod-like at the onset of polymerisation and also at low polymerisation temperature. The conductivity has been determined by four-point measurement with incorporation of correction factor. It was found that the electrical conductivity varies from below 0.5 S/cm to over 11 S/cm with variation in duration and temperature of polymerization. Conductivity is proposed to be dependent on the particle size as conductivity increases with decrease in polymerisation temperature and increase in polymerisation duration, similar to the trend observed for particle size. This may be indicative of equal probability of inter- chain and intra-chain charge transport.
VL  - 1
IS  - 4
ER  -

Copy | Download