In the present article, an attempt has been made for the study of thermo-mechanical properties of alloy sample (Al-1 wt%Si). The effect of this we find good results on the microstructure and hardness of our samples with an addition of 1-3 wt.% (Al-Si). The analyses by transmission electron microscopy (TEM) show that aging heat treatment promotes micro-structural changes in morphology, size, and spatial distribution of precipitates.
| Published in | American Journal of Materials Synthesis and Processing (Volume 2, Issue 5) |
| DOI | 10.11648/j.ajmsp.20170205.12 |
| Page(s) | 61-64 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
Aluminium-Silicon (Al-Si) Alloys, Temperature, Structure, Transmission Electron Microscopy (TEM)
| [1] | J. M. Silcock, T. J. Heal, H. K. Hardy, “Structural ageing characteristics of binary aluminium-copper alloys”, Japan Institute of Metals, 82, pp. 239-248, (1954). |
| [2] | L. Backerud, G. Chai, J. Tamminen, “Solidfication characteristics of Aluminium Alloys” Volume 2, AFS/SKANALUMINIUM, Oslo [1986]. |
| [3] | N. Tenekedjiev, H. Mulazimoglu, B. Closset, J. Gruzleski, “Microstructures and Thermal Analysis of Strontium- Treated Aluminum-Si Alloys”, American Foundrymen’s Society Inc., Des Plaines, Illinois, USA [1995]. |
| [4] | H. W. Doty, A. M. Samuel, F. H. Samuel, “Factors Controlling the Type and Morphology of Cu-Containing Phases in the 319 Aluminum Alloy”, 100th AFS Casting Congress, Philadelphia, Pennsylvania, USA, April 20-23, pp. 1-30, [1996]. |
| [5] | M. Djurdjevic, T. Stockwell, J. Sokolowski, “The Effect of Strontium on the Microstructure of the Aluminum-Si and Aluminum-Cu Eutectics in the 319 Aluminum Alloy”, Inter. Journal of Cast Metals Research, 12, pp. 67-73, 1999. |
| [6] | Hansel Manuel Medrano-Prieto, Carlos Gamaliel Garay-Reyes, Cynthia Deisy Gómez-Esparza, Joaquín Aguilar-Santillán, María Cristina Maldonado-Orozco, Roberto Martínez-Sánchez, “Evolution of Microstructure in Al-Si-Cu System Modified with a Transition Element Addition and its Effect on Hardness”, Materials Research, 19 (Suppl. 1): 59-66, (2016). |
| [7] | E. Matsubara, J. B. Cohen, “The G. P. zones in Al-Cu alloys II”, Acta Metallurgica, Vol. 33 (11), pp. 1957-1969, 1985. |
| [8] | A. M. Abd El-Khalek, “The variation of work-hardening characteristics of Al-1wt%Si and Al-1wt%, Si-0.1 wt.%,, Zr-0.1 wt.%,, Ti alloys ”, Physica B, 315, pp. 7-12, (2002). |
| [9] | F. Abd EI-Salam, M. R. Nagy, “Thermally induced structural and mechanical variations in ternary AL-Si based alloys”, Proc. Math. Phys. Soc. Egypt, 47, (1979) 179–185. |
| [10] | J. A. Spittle, S. G. R. Brown, “Computer simulations of the effects of alloy variables on the grain structures of castings”, Acta Metallurgica, Vol. 37 (7), pp. 1803-1810, (1989). |
| [11] | A. M. Abd El-Khalek, F. Abd El-Salam, “Effect of irradiation and pre-ageing temperature on the mechanical properties of Al-Si alloys”, Radiation Effects & Defects in Solids 163, 10, (2008) 835–842. |
| [12] | G. H. Deaf, M. H. N. Beshai, A. M. Abd El-Khalek, G. Graiss, M. A. Kenawy, “Effect of structural transformation on the stress-strain characteristics of Al-Si alloys”, Cryst. Res. Technol. 32 (1997) 3. |
| [13] | J D James, J A Spittle, S G R Brown and R W Evans, “A review of measurement techniques for the thermal expansion coefficient of metals and alloys at elevated temperatures”, Measurement Science Technology. 12 (2001) R1–R15. |
| [14] | R. V. Nandedkar, A. K. Tyagi; In Metallic Glasses; T. R. Anantharaman, Ed. Trans. Tech. Pub. (1984) 165–174. |
| [15] | Alveera Khan, Shirish Joshi, M. Ayaz Ahmad, Vyacheslav Lyashenko, “Some effect of Chemical treatment by Ferric Nitrate salts on the structure and morphology of Coir Fibre Composites”, Advances in Materials Physics and Chemistry (AMPC), Vol. 5 (1), pp. 39-45, (2015) doi: 10.4236/ampc.2015.51006 |
| [16] | Alveera Khan, M. Ayaz Ahmad, Shirish Joshi, Vyacheslav Lyashenko, “Synthesis of Alumina Fibre by Annealing Method using Coir Fibre”, American Chemical Science Journal, Vol. 15 (2), (2016), pp. 1-7. |
| [17] | Alveera Khan, M. Ayaz Ahmad, Shirish Joshi, Said A. F. Al Said, “Abrasive Wear Behaviour of Chemically Treated Coir Fibre Filled Epoxy Polymer Composites”, American Journal of Mechanical Engineering and Automation, Vol. 1 (1) (2014), pp. 1-5. |
| [18] | Alveera Khan, M. Ayaz Ahmad and Shirish Joshi, “A systematic study of electrical properties of chemically treated coir fibre reinforced epoxy composites with ANN model”, International Journal of Science and Research (IJSR), Vol. 4 (1), (2015), pp. 410-414. |
| [19] | Alveera Khan, Ayaz Ahmad M, Shrish J, Abd. El-Khalek AM. “Study of mechanical and electrical behavior of chemically treated coir fibre reinforced epoxy composites”, Int. J. of Multidisciplinary Research & Advcs. in Engg. (IJMRAE). Vol. 2, (2013): 171-180. |
| [20] | Vyacheslav V. Lyashenko, Mohammad Ayaz Ahmad, Valentin A. Lyubchenko, Alveera Khan, Oleg A. Kobylin. “The methodology of image processing in the study of the properties of fiber as a reinforcing agent in polymer compositions”, International Journal of Advanced Research in Computer Science. Vol. 7(1), (2016)): 15-18. |
| [21] | Alveera KS. Joshi, Vyacheslav L, Nicolina P, Ayaz Ahmad M. Artificial neural networking (ann) treatment on electrical properties of coir fiber reinforced epoxy composites. Saudi International Meeting on Frontiers of Physics (SIMFP). at February 17-19, 2015, Jazan University, Saudi Arabia; 2015. |
| [22] | Alveera Khan, Quraishi AM, Joshi S, Ayaz Ahmad M. Synthesis and characterization of chemically treated fibre and its reinforced epoxy polymer composites. Mathematical Sciences International Research Journal. Vol. 2(2), (2013): 673-676. |
APA Style
Nursabah Sarikavakli, Syed Khalid Mustafa, Mohammad Ayaz Ahmad. (2017). Evolution of Thermo-mechanical Properties of Aluminium-Silicon Alloy (Al-1wt%Si). American Journal of Materials Synthesis and Processing, 2(5), 61-64. https://doi.org/10.11648/j.ajmsp.20170205.12
ACS Style
Nursabah Sarikavakli; Syed Khalid Mustafa; Mohammad Ayaz Ahmad. Evolution of Thermo-mechanical Properties of Aluminium-Silicon Alloy (Al-1wt%Si). Am. J. Mater. Synth. Process. 2017, 2(5), 61-64. doi: 10.11648/j.ajmsp.20170205.12
AMA Style
Nursabah Sarikavakli, Syed Khalid Mustafa, Mohammad Ayaz Ahmad. Evolution of Thermo-mechanical Properties of Aluminium-Silicon Alloy (Al-1wt%Si). Am J Mater Synth Process. 2017;2(5):61-64. doi: 10.11648/j.ajmsp.20170205.12
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ajmsp.20170205.12,
author = {Nursabah Sarikavakli and Syed Khalid Mustafa and Mohammad Ayaz Ahmad},
title = {Evolution of Thermo-mechanical Properties of Aluminium-Silicon Alloy (Al-1wt%Si)},
journal = {American Journal of Materials Synthesis and Processing},
volume = {2},
number = {5},
pages = {61-64},
doi = {10.11648/j.ajmsp.20170205.12},
url = {https://doi.org/10.11648/j.ajmsp.20170205.12},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajmsp.20170205.12},
abstract = {In the present article, an attempt has been made for the study of thermo-mechanical properties of alloy sample (Al-1 wt%Si). The effect of this we find good results on the microstructure and hardness of our samples with an addition of 1-3 wt.% (Al-Si). The analyses by transmission electron microscopy (TEM) show that aging heat treatment promotes micro-structural changes in morphology, size, and spatial distribution of precipitates.},
year = {2017}
}
TY - JOUR T1 - Evolution of Thermo-mechanical Properties of Aluminium-Silicon Alloy (Al-1wt%Si) AU - Nursabah Sarikavakli AU - Syed Khalid Mustafa AU - Mohammad Ayaz Ahmad Y1 - 2017/10/28 PY - 2017 N1 - https://doi.org/10.11648/j.ajmsp.20170205.12 DO - 10.11648/j.ajmsp.20170205.12 T2 - American Journal of Materials Synthesis and Processing JF - American Journal of Materials Synthesis and Processing JO - American Journal of Materials Synthesis and Processing SP - 61 EP - 64 PB - Science Publishing Group SN - 2575-1530 UR - https://doi.org/10.11648/j.ajmsp.20170205.12 AB - In the present article, an attempt has been made for the study of thermo-mechanical properties of alloy sample (Al-1 wt%Si). The effect of this we find good results on the microstructure and hardness of our samples with an addition of 1-3 wt.% (Al-Si). The analyses by transmission electron microscopy (TEM) show that aging heat treatment promotes micro-structural changes in morphology, size, and spatial distribution of precipitates. VL - 2 IS - 5 ER -
Information
Email: