Bulk materials, which are transported on continuous conveyors, partly have a high energy content, depending on the specified mass flow and the conveying velocity. At discharge points to a storage area or at transfer points from one conveyor to another, the energy content often increases due to the elevation of the discharge conveyor. At these points it is possible to recover a large part of the energy due to the mass flow (conveying velocity) and the drop height of the bulk material. This energy is usually converted into "wear" of the conveying system or the bulk material at discharge or transfer points. Furthermore, it is available free of charge and could be used to achieve more environmentally friendly continuous conveying systems. This research paper is focused on a new method which has been developed and patented by the "Chair of Mining Engineering and Mineral Economics - Conveying Technology and Design Methods" at the Montanuniversität Leoben / Austria. This invention makes it possible to recover a large part of the above mentioned energy. The invented so-called "Solid State Material Driven Turbine" allows the recovery of this energy directly to the conveying system using a traction drive, or to the electric circuit using a generator. The paper describes the new method and presents turbine prototypes that have been designed using simulations and tested under laboratory condition and in operational trials. Additionally, a discussion concerning the costs and economical aspects of the invention is included. For a special application of such a turbine a permanent magnetic safety coupling can be used. First test results of such a coupling are presented. The paper also includes layout criteria for an overshot "Solid State Material Driven Turbine". All executed experiments showed, that a recovery of energy from moving bulk materials using a "Solid State Material Driven Turbine" is possible. An efficiency of more than 50% can be realised. The occurred challenges during the tests phase under real conditions can be managed effortlessly.
| Published in | Earth Sciences (Volume 8, Issue 1) |
| DOI | 10.11648/j.earth.20190801.13 |
| Page(s) | 20-44 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
"Solid State Material Driven Turbine", Bulk Material, Energy Recovery, Continuous Conveyor
| [1] | Conveyor Equipment Manufacturers Association. (2014). Belt conveyors for bulk materials. 7th ed. Florida: Conveyor Equipment Manufacturers Association. |
| [2] | Prenner Michael, inventor; Montanuniversität Leoben, assignee. Solid State Material Driven Turbine. European Patent EP 2788622 B1. 2018 May 23. |
| [3] | ANDRITZ HYDRO GmbH. (2018) SMALL AND MINI HYDROPOWER SOLUTIONS. https://www.andritz.com/products-n/group/markets/small-mini-hydropower-plants. |
| [4] | Rodríguez, J., Pontt, J., Becker, N., and Weinstein, A. (2002) Regenerative Drives in the Megawatt Range for High-Performance Downhill Belt Conveyors. IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, VOL. 38, NO. 1, JANUARY/FEBRUARY 2002. |
| [5] | De Graaf, M. C. (2013). Viability study of an energy-recovery system for belt conveyors. Department Marine and Transport Technology, Delft University of Technology. |
| [6] | Prenner, M., Kessler, F. (2012). Energy-recovery System for Continuous Conveyors. Conference publication, BulkEurope 2012. |
| [7] | Prenner, M., Grübler, C. & Zeiler, S. (2018) Vorteile von Feststoffturbinen. Schüttgut, 5, 68-72. |
| [8] | Ashburner, R., Hull, P., Lloyd, M., Partington, R., Romain, P. (2017). Dulverton Weir & Leat Conservation Trust. http://dulvertonweir.org.uk/gallery/. |
| [9] | Tanaka Hydropower CO., LTD. (2017). http://www.tanasui.co.jp/productsTurbinesEn.html. |
| [10] | Julius, M. H. (1909) Meyers Großes Konversations-Lexikon, 20th ed. Leipzig and Vienna: Bibliographisches Institut. |
| [11] | Jakob, C., Konietzky, H. (2012). Partikelmethoden - Eine Übersicht -. Freiberg: Technische Universität Bergakademie Freiberg. |
| [12] | Prenner, M. (2015). Feststoffturbine zur Energierückgewinnung in Kombination mit Gurtförderanlagen. BHM Berg- und Hüttenmännisches Monatsheft, 1, 21-31. |
| [13] | Prenner, M. (2014). Feststoffturbine zur Energierückgewinnung für stetige Schüttgurförderanlagen. Wer Was Wo. Forschung@MUL, 2014, 186. |
| [14] | Prenner, M. (2013). Endbericht - Energierückgewinnung, FFG-Programm: Intelligente Produktion, FFG Projektnummer: 834274. |
| [15] | Liu, Z. Q. (2003). Air entrainment in free falling bulk materials, Doctor of Philosophy thesis, Faculty of Engineering, University of Wollongong. http://ro.uow.edu.au/theses/1816. |
| [16] | Technische Antriebselemente GmbH. (2017). http://www.tea-hamburg.de/en/. |
| [17] | Röchling Leripa Papertech GmbH & Co. KG. (2015) http://www.leripa.com/de/aktuelles/news/action.view/entity.detail/key. 35.html. MAWEV, Enns, 2015 March 18. - 21. |
APA Style
Michael Prenner. (2019). Energy Recovering System for Moving Bulk Materials. Earth Sciences, 8(1), 20-44. https://doi.org/10.11648/j.earth.20190801.13
ACS Style
Michael Prenner. Energy Recovering System for Moving Bulk Materials. Earth Sci. 2019, 8(1), 20-44. doi: 10.11648/j.earth.20190801.13
AMA Style
Michael Prenner. Energy Recovering System for Moving Bulk Materials. Earth Sci. 2019;8(1):20-44. doi: 10.11648/j.earth.20190801.13
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.earth.20190801.13,
author = {Michael Prenner},
title = {Energy Recovering System for Moving Bulk Materials},
journal = {Earth Sciences},
volume = {8},
number = {1},
pages = {20-44},
doi = {10.11648/j.earth.20190801.13},
url = {https://doi.org/10.11648/j.earth.20190801.13},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.earth.20190801.13},
abstract = {Bulk materials, which are transported on continuous conveyors, partly have a high energy content, depending on the specified mass flow and the conveying velocity. At discharge points to a storage area or at transfer points from one conveyor to another, the energy content often increases due to the elevation of the discharge conveyor. At these points it is possible to recover a large part of the energy due to the mass flow (conveying velocity) and the drop height of the bulk material. This energy is usually converted into "wear" of the conveying system or the bulk material at discharge or transfer points. Furthermore, it is available free of charge and could be used to achieve more environmentally friendly continuous conveying systems. This research paper is focused on a new method which has been developed and patented by the "Chair of Mining Engineering and Mineral Economics - Conveying Technology and Design Methods" at the Montanuniversität Leoben / Austria. This invention makes it possible to recover a large part of the above mentioned energy. The invented so-called "Solid State Material Driven Turbine" allows the recovery of this energy directly to the conveying system using a traction drive, or to the electric circuit using a generator. The paper describes the new method and presents turbine prototypes that have been designed using simulations and tested under laboratory condition and in operational trials. Additionally, a discussion concerning the costs and economical aspects of the invention is included. For a special application of such a turbine a permanent magnetic safety coupling can be used. First test results of such a coupling are presented. The paper also includes layout criteria for an overshot "Solid State Material Driven Turbine". All executed experiments showed, that a recovery of energy from moving bulk materials using a "Solid State Material Driven Turbine" is possible. An efficiency of more than 50% can be realised. The occurred challenges during the tests phase under real conditions can be managed effortlessly.},
year = {2019}
}
TY - JOUR T1 - Energy Recovering System for Moving Bulk Materials AU - Michael Prenner Y1 - 2019/02/21 PY - 2019 N1 - https://doi.org/10.11648/j.earth.20190801.13 DO - 10.11648/j.earth.20190801.13 T2 - Earth Sciences JF - Earth Sciences JO - Earth Sciences SP - 20 EP - 44 PB - Science Publishing Group SN - 2328-5982 UR - https://doi.org/10.11648/j.earth.20190801.13 AB - Bulk materials, which are transported on continuous conveyors, partly have a high energy content, depending on the specified mass flow and the conveying velocity. At discharge points to a storage area or at transfer points from one conveyor to another, the energy content often increases due to the elevation of the discharge conveyor. At these points it is possible to recover a large part of the energy due to the mass flow (conveying velocity) and the drop height of the bulk material. This energy is usually converted into "wear" of the conveying system or the bulk material at discharge or transfer points. Furthermore, it is available free of charge and could be used to achieve more environmentally friendly continuous conveying systems. This research paper is focused on a new method which has been developed and patented by the "Chair of Mining Engineering and Mineral Economics - Conveying Technology and Design Methods" at the Montanuniversität Leoben / Austria. This invention makes it possible to recover a large part of the above mentioned energy. The invented so-called "Solid State Material Driven Turbine" allows the recovery of this energy directly to the conveying system using a traction drive, or to the electric circuit using a generator. The paper describes the new method and presents turbine prototypes that have been designed using simulations and tested under laboratory condition and in operational trials. Additionally, a discussion concerning the costs and economical aspects of the invention is included. For a special application of such a turbine a permanent magnetic safety coupling can be used. First test results of such a coupling are presented. The paper also includes layout criteria for an overshot "Solid State Material Driven Turbine". All executed experiments showed, that a recovery of energy from moving bulk materials using a "Solid State Material Driven Turbine" is possible. An efficiency of more than 50% can be realised. The occurred challenges during the tests phase under real conditions can be managed effortlessly. VL - 8 IS - 1 ER -
Information
Email: