Improved Processing Research on Arc Tooth Cylindrical Gear
International Journal of Environmental Monitoring and Analysis
Volume 5, Issue 3, June 2017, Pages: 91-95
Received: Feb. 24, 2017;
Accepted: Mar. 23, 2017;
Published: Jun. 29, 2017
Views 1800 Downloads 60
Zhang Zheng, School of Mechanical Engineering, Xihua University, Chengdu, China
Tang Rui, School of Mechanical Engineering, Panzhihua University, Panzhihua, China
Follow on us
Based on the analysis of arc tooth cylindrical gear forming principle and on the basis of existing processing methods, also combined with the principle of ordinary milling knife plate rotating, This paper puts forward an improved double-edged milling method of the Arc tooth cylindrical gear, which include two aspects: one is the double edged sword substance milling gear, double-point tool forming tooth at a time, with the module gear form point contact transmission vice; The second is to use double tooth gear milling tool, cutting tool a tooth, the gear machining and broadsword dish of double edge milling gear transmission line contact vice. It concluded that the improved processing technology is more advanced, the method of production is more efficient.
Arc Tooth Cylindrical Gear, Double-Edged Milling, Processing Method
To cite this article
Improved Processing Research on Arc Tooth Cylindrical Gear, International Journal of Environmental Monitoring and Analysis.
Vol. 5, No. 3,
2017, pp. 91-95.
Copyright © 2017 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/
) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Hai-xiang li. Basic theory of gear transmission and the growing surface test research [D]. Chongqing university, 2012.
Xiao-wei sun. The characteristics and processing method of arc tooth gear [J]. Journal of mechanical engineer, (8):1999-22.
Yang Zhi. Small module the study of the theory of the spiral bevel gear nc gear cutting processing [D]. Suzhou: suzhou university, 2004.
Guo Haisheng. A new type of cylindrical gear teeth method research [J]. Journal of shanxi coal, 1997, (2):27 to 30, and technology press, 1991
Zou Min. Arc cylindrical gear tooth line parameter calculation and selection [J]. Journal of mechanical design and research, 2000, 2:36 to 38.
Yutang dai, there have been He Xing, de-sheng jiang. Arc cylindrical gear tooth line nc hobbing mechanism and experimental study [J]. Journal of mechanical engineering, 2006, 17 (7):706-709.
KouShiYao Liu Mingbao, liang-chen wu. A new method of arc tooth cylindrical gears processing [J]. Modern manufacturing engineering, 2002 (9):16-17.
Ai-ping song, wei-wei wu, noble, Gao Wenjie. Arc tooth cylindrical gears ideal geometric parameters and their processing methods [J]. Journal of Shanghai jiaotong university, 2010. 44 (12):1735-1740.
Wu Daren LuoGuShun. Gear engagement principle [M]. Beijing: the new era of publishing house, 1983.
R. T. Tseng, C. B. Tsay. Mathematical model and undercutting of cylindrical gears with curvilinear shaped teeth [J]. Mechanism and Machine Theory, 2001, 36:1189-1202.