International Journal of Energy and Power Engineering

| Peer-Reviewed |

Optimization of the Production of Biodiesel Assisted by Ultrasonic and Microwave

Received: 08 April 2013    Accepted:     Published: 02 April 2013
Views:       Downloads:

Share This Article

Abstract

The transesterification reaction of present study was assisted by ultrasonic mixing and microwave irradiation. Central composite design (CCD) was employed to optimize the transesterification reaction conditions of biodiesel production from soybean oil. A mathematical model predicted that the theoretical conversion rate of soybean oil of 102.19% could be obtained under the following reaction conditions: amount of catalyst used, 1.4wt%; reaction temperature, 57.89oC; and methanol/oil molar ratio, 8.11:1, assisted by 1-min ultrasonic mixing and 2-min microwave irradiation. This result indicated that there are a wide range of reaction conditions to obtain conversion rate approach 100% assisted by ultrasonic mixing and microwave irradiation. Combined the ultrasonic mixing and microwave irradiation are very efficiency process to produce biodiesel. The total reaction time was shorter than those obtained in previous studies

DOI 10.11648/j.ijepe.20130202.14
Published in International Journal of Energy and Power Engineering (Volume 2, Issue 2, April 2013)
Page(s) 54-59
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Catalyst, Reaction Temperature, Methanol/Oil Molar Ratio, Ultrasonic, Microwave, Soybean Oil

References
[1] G. Vicente, M. Martınez, and J. Aracil, "Integrated biodiesel production: A comparison of different homogeneous catalysts systems," Bioresource Technology, vol. 92, 2004, pp.297-305.
[2] D. E. Lopez, J. G. Goodwin, D. A. Bruce, and E. Lotero, "Transesterification of triacetin with methanol on solid acid and base catalysts," Applied Catalysis A: General, vol. 295, 2005, pp. 97-105.
[3] M. Diasakou, A. Louloudi, and N. Papayannakos, "Kinetics of the non-cataytic transesterification of soybean oil," Fuel, vol. 77, 1998, pp. 1297-1302
[4] H. Noureddini, V. Harkey, and V. Medikondure, "A continuous process for the conversion of vegetable oils into methyl esters of fatty acids," Journal of the American Oil Chemists Society, vol. 75, 2005, pp. 1775-1783.
[5] F. F. P. Santos, S. Rodrigues,and A. N. Fernandes, "Optimization of the production of biodiesel from soybean oil by ultrasound assisted methanolysis," Fuel Processing Technology, vol. 90, 2009, pp. 312-316.
[6] C. Stavarache, M. Vinatoru, R. Nishmura, and Y. Maeda, "Fatty acids methyl esters from vegetable oil by means of ultrasonic energy," Ultrasonics Sonochemistry, vol. 12, 2005, pp. 367-372.
[7] J. Ji, J. Wang, Y. Li, Y. Yu, and Z. Xu, "Preparation of biodiesel with the help of ultrasonic and hydrodynamic cavitation," Ultrasonics, vol. 44, 2006, pp. e411-e414.
[8] N. Azcan, and A. Danisman, "Microwave assisted transesterification of rapeseed oil," Fuel, vol. 87, 2008, pp.1781-1788.
[9] C. Koopmans, M. Iannelli, P. Kerep, M. Klink, S. Schmitz, S. Sinnwell, and H. Ritter, "Microwave-assisted polymer chemistry: Heck-reaction, transesterification, baeyer-villiger oxidation, oxazoline polymerization, acrylamides, and porous materials," Tetrahedron, vol. 62, 2006, pp. 4709-4714.
[10] J. Hernando, P. Leton, M. P. Matia, J. L. Novella, and J. Alvarez-Builla, "Biodiesel and fame synthesis assisted by microwaves: Homogeneous batch and flow process," Fuel, vol. 86, 2006, pp. 1641-1644.
[11] Y. C. Sharma, B. Singh, and J. Korstad, "Latest developments on application of heterogenous basic catalysts for an efficient and eco friendly synthesis of biodiesel: A review," Fuel, vol. 90, 2011, pp. 1309-1324.
[12] D. Y. C. Leung, X. Wu, and M. K. H. Leung, "A review on biodiesel production using catalyzed transesterification," Applied Energy, vol. 87, 2010, pp. 1083-1095.
[13] M.-C. Hsiao, C.-C. Lin, and Y.-H. Chang, "Microwave irradiation-assisted transesterification of soybean oil to biodiesel catalyzed by nanopowder calcium oxide," Fuel, vol. 90, 2011, pp. 1963-1967.
[14] G. E. P. Box, and N. R. Draper, Empirical model building and response surfaces, John Wiley & Sons, New York,1986.
[15] D. C. Montgomery, Design and analysis of experiments, 3rd ed., John Wiley & Sons, New York, 1991.
[16] S. Rodrigues, L. C. A. Mazzone, F. F. P. Santos, M. G. A. Cruz, and F. A. N. Fernandes, "Optimization of the production of ethyl esters by ultrasound assisted reaction of soybean oil and ethanol," Brazilian Journal of Chemical Engineering, vol. 26, 2009, pp. 361-366.
[17] A. I. Khuri, and J. A. Cornell, Response surfaces, 2nd Edition, Dekker, New York, 1996.
Author Information
  • Department of Environment Engineering, Kun Shan University, Taiwan, R.O.C.

  • Department of Business Administration, Kun Shan University, Taiwan, R.O.C.

Cite This Article
  • APA Style

    Ming-Chien Hsiao, Chin-Chiuan Lin. (2013). Optimization of the Production of Biodiesel Assisted by Ultrasonic and Microwave. International Journal of Energy and Power Engineering, 2(2), 54-59. https://doi.org/10.11648/j.ijepe.20130202.14

    Copy | Download

    ACS Style

    Ming-Chien Hsiao; Chin-Chiuan Lin. Optimization of the Production of Biodiesel Assisted by Ultrasonic and Microwave. Int. J. Energy Power Eng. 2013, 2(2), 54-59. doi: 10.11648/j.ijepe.20130202.14

    Copy | Download

    AMA Style

    Ming-Chien Hsiao, Chin-Chiuan Lin. Optimization of the Production of Biodiesel Assisted by Ultrasonic and Microwave. Int J Energy Power Eng. 2013;2(2):54-59. doi: 10.11648/j.ijepe.20130202.14

    Copy | Download

  • @article{10.11648/j.ijepe.20130202.14,
      author = {Ming-Chien Hsiao and Chin-Chiuan Lin},
      title = {Optimization of the Production of Biodiesel Assisted by Ultrasonic and Microwave},
      journal = {International Journal of Energy and Power Engineering},
      volume = {2},
      number = {2},
      pages = {54-59},
      doi = {10.11648/j.ijepe.20130202.14},
      url = {https://doi.org/10.11648/j.ijepe.20130202.14},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ijepe.20130202.14},
      abstract = {The transesterification reaction of present study was assisted by ultrasonic mixing and microwave irradiation. Central composite design (CCD) was employed to optimize the transesterification reaction conditions of biodiesel production from soybean oil. A mathematical model predicted that the theoretical conversion rate of soybean oil of 102.19% could be obtained under the following reaction conditions: amount of catalyst used, 1.4wt%; reaction temperature, 57.89oC; and methanol/oil molar ratio, 8.11:1, assisted by 1-min ultrasonic mixing and 2-min microwave irradiation. This result indicated that there are a wide range of reaction conditions to obtain conversion rate approach 100% assisted by ultrasonic mixing and microwave irradiation. Combined the ultrasonic mixing and microwave irradiation are very efficiency process to produce biodiesel. The total reaction time was shorter than those obtained in previous studies},
     year = {2013}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Optimization of the Production of Biodiesel Assisted by Ultrasonic and Microwave
    AU  - Ming-Chien Hsiao
    AU  - Chin-Chiuan Lin
    Y1  - 2013/04/02
    PY  - 2013
    N1  - https://doi.org/10.11648/j.ijepe.20130202.14
    DO  - 10.11648/j.ijepe.20130202.14
    T2  - International Journal of Energy and Power Engineering
    JF  - International Journal of Energy and Power Engineering
    JO  - International Journal of Energy and Power Engineering
    SP  - 54
    EP  - 59
    PB  - Science Publishing Group
    SN  - 2326-960X
    UR  - https://doi.org/10.11648/j.ijepe.20130202.14
    AB  - The transesterification reaction of present study was assisted by ultrasonic mixing and microwave irradiation. Central composite design (CCD) was employed to optimize the transesterification reaction conditions of biodiesel production from soybean oil. A mathematical model predicted that the theoretical conversion rate of soybean oil of 102.19% could be obtained under the following reaction conditions: amount of catalyst used, 1.4wt%; reaction temperature, 57.89oC; and methanol/oil molar ratio, 8.11:1, assisted by 1-min ultrasonic mixing and 2-min microwave irradiation. This result indicated that there are a wide range of reaction conditions to obtain conversion rate approach 100% assisted by ultrasonic mixing and microwave irradiation. Combined the ultrasonic mixing and microwave irradiation are very efficiency process to produce biodiesel. The total reaction time was shorter than those obtained in previous studies
    VL  - 2
    IS  - 2
    ER  - 

    Copy | Download

  • Sections