International Journal of Energy and Power Engineering

| Peer-Reviewed |

Coupled Thermoelastic Analysis of Thick-Walled Pressurized Cylinders

Received: 15 April 2013    Accepted:     Published: 02 April 2013
Views:       Downloads:

Share This Article

Abstract

In the present study, the coupled thermoelastic analysis was carried out for determining the temperature, radial displacement, and radial and circumferential stress distributions of a classical cylinder, and later a reactor pressure vessel exposed to an inner moderator pressure and thermal loads. For the solution, a critical region is analyzed to imitate the effect of the outlet nozzles of the reactor pressure vessel. In order to certify our computational code, the temperature, radial displacement, radial stress, and circumferential stress distributions were also calculated using finite element (FE) method. It was concluded that the analytical results were in good agreement with the computational ones for the classic cylinder. The effect of thermomechanical loads on the temperature, displacement, and stress distributions was discussed in detail. This presented analysis proposes satisfactory results to design reactor pressure vessels.

DOI 10.11648/j.ijepe.20130202.15
Published in International Journal of Energy and Power Engineering (Volume 2, Issue 2, April 2013)
Page(s) 60-68
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Coupled Thermoelasticity, Thick-Walled Cylinder, Reactor Pressure Vessel, Outlet Nozzles

References
[1] Q. Zhang, Z. W. Wang, C. Y. Tang, D. P. Hu, P. Q. Liu, and L. Z. Xia, "Analytical solution of the thermo-mechanical stresses in a multilayered composite pressure vessel considering the influence of the closed ends", International Journal of Pressure Vessels and Piping 98, pp. 102–110, 2012.
[2] A. R. Ali, N. C. Ghosh, and T. E. Alam, "Optimum Design of Pressure Vessel Subjected to Autofrettage Process", World Academy of Science, Engineering and Technology 46, 2010, 667–672.
[3] H. M. Wang, and H. J. Ding, "Transient thermoelastic solution of a multilayered orthotropic hollow cylinder for axisymmetric problems", Journal of Thermal Stresses 27; 2004, pp. 1169–1185.
[4] G. Atefi, and H. Mahmoudi, "Thermal stresses in the wall of pipes caused by periodic change of temperature of medium fluid", The 4th International Meeting of Advances in Thermofluids AIP Conf. Proc. 1440; 2011, pp. 72–89.
[5] M. Jabbari, S. Sohrabpour, and M. R. Eslami, "Mechanical and thermal stresses in a functionally graded hollow cylinder due to radially symmetric loads", International Journal of Pressure Vessels and Piping 79; 2002, pp. 493–497.
[6] Z. S. Shao, T. J. Wang, and K. K. Ang, "Transient thermo-mechanical analysis of functionally graded hollow circular cylinders", Journal of Thermal Stresses 30:1; 2007, pp. 81–104.
[7] N. K. Lamba and N. W. Khobragade, "Uncoupled thermoelastic analysis for a thick cylinder with radiation", Theoretical & Applied Mechanics Letters 2; 2012, 021005.
[8] N. Tutuncu and M. Ozturk, "Exact solutions for stresses in functionally graded pressure vessels", Compos. Part B. 32; 2001, pp. 683–686.
[9] A. H. Ghosn and M. Sabbaghian, "Quasi-static coupled problems of thermoelasticity for cylindrical regions", Journal of Thermal Stresses 5; 1982, pp. 299–313.
[10] C. I. Hung, C. K. Chen, and Z. Y. Lee, "Thermoelastic transient response of multilayered hollow cylinder with initial interface pressure", Journal of Thermal Stresses 24; 2001, pp. 987–1006.
[11] Z. Y. Lee, C. K. Chen, and C. I. Hung, "Transient thermal stress analysis of multilayered hollow cylinder", Acta Mechanica 151; 2001, pp. 75–88.
[12] H. Santos, C. M. M. Soares, C. A. M. Soares, and J. N. Reddy, "A semi-analytical finite element model for the analysis of cylindrical shells made of functionally graded materials under thermal shock", Composite Structures 86; 2008, pp. 10–21.
[13] J. N. Reddy and C. D. Chin, "Thermomechanical analysis of functionally graded cylinders and plates", Journal of Thermal Stresses 21(6); 1998, pp. 593–626.
[14] Y. C. Fung, "Foundations of solid mechanics", Prentice-Hall, Inc., Englewood Cliffs, New Jersey, 1965.
[15] J. N. Reddy, "An introduction to continuum mechanics with applications", New York: Cambridge University Press, 2008.
[16] D. Annaratone, "Pressure vessel design", Springer, 2007.
[17] S. Timoshenko, "Strength of material part 2, advanced theory and problems", 3rd Edition, D. Van Nostrand Company Inc., Princeton, NJ, 1956.
[18] S. S. Al-Rushudi, "Finite Element Versus Boundary Element Analysis of Two-Dimensional Coupled Thermoelasticity", Ph.D. thesis, Mechanical Engineering Dept., Cranfield Institute of Technology, Cranfield, 1991.
[19] P. P. Poworoznek, "Elastic-plastic behavior of a cylinder subject to mechanical and thermal loads", M.Sc. thesis, Rensselaer Polytechnic Institute, Hartford, CT, 2008.
[20] Status Report for Advanced Nuclear Reactor Designs – Report 108 (VVER-1200(V-491)).
[21] B. Yamaji and A. Aszódi, "CFD analysis of coolant mixing in VVER-1000 pressure vessel".
[22] ANSYS version 11.0; 2007
Author Information
Cite This Article
  • APA Style

    Begüm Kanlıkama, Ayşegül Abuşoğlu, İbrahim H. Güzelbey. (2013). Coupled Thermoelastic Analysis of Thick-Walled Pressurized Cylinders. International Journal of Energy and Power Engineering, 2(2), 60-68. https://doi.org/10.11648/j.ijepe.20130202.15

    Copy | Download

    ACS Style

    Begüm Kanlıkama; Ayşegül Abuşoğlu; İbrahim H. Güzelbey. Coupled Thermoelastic Analysis of Thick-Walled Pressurized Cylinders. Int. J. Energy Power Eng. 2013, 2(2), 60-68. doi: 10.11648/j.ijepe.20130202.15

    Copy | Download

    AMA Style

    Begüm Kanlıkama, Ayşegül Abuşoğlu, İbrahim H. Güzelbey. Coupled Thermoelastic Analysis of Thick-Walled Pressurized Cylinders. Int J Energy Power Eng. 2013;2(2):60-68. doi: 10.11648/j.ijepe.20130202.15

    Copy | Download

  • @article{10.11648/j.ijepe.20130202.15,
      author = {Begüm Kanlıkama and Ayşegül Abuşoğlu and İbrahim H. Güzelbey},
      title = {Coupled Thermoelastic Analysis of Thick-Walled Pressurized Cylinders},
      journal = {International Journal of Energy and Power Engineering},
      volume = {2},
      number = {2},
      pages = {60-68},
      doi = {10.11648/j.ijepe.20130202.15},
      url = {https://doi.org/10.11648/j.ijepe.20130202.15},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ijepe.20130202.15},
      abstract = {In the present study, the coupled thermoelastic analysis was carried out for determining the temperature, radial displacement, and radial and circumferential stress distributions of a classical cylinder, and later a reactor pressure vessel exposed to an inner moderator pressure and thermal loads. For the solution, a critical region is analyzed to imitate the effect of the outlet nozzles of the reactor pressure vessel. In order to certify our computational code, the temperature, radial displacement, radial stress, and circumferential stress distributions were also calculated using finite element (FE) method. It was concluded that the analytical results were in good agreement with the computational ones for the classic cylinder. The effect of thermomechanical loads on the temperature, displacement, and stress distributions was discussed in detail. This presented analysis proposes satisfactory results to design reactor pressure vessels.},
     year = {2013}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Coupled Thermoelastic Analysis of Thick-Walled Pressurized Cylinders
    AU  - Begüm Kanlıkama
    AU  - Ayşegül Abuşoğlu
    AU  - İbrahim H. Güzelbey
    Y1  - 2013/04/02
    PY  - 2013
    N1  - https://doi.org/10.11648/j.ijepe.20130202.15
    DO  - 10.11648/j.ijepe.20130202.15
    T2  - International Journal of Energy and Power Engineering
    JF  - International Journal of Energy and Power Engineering
    JO  - International Journal of Energy and Power Engineering
    SP  - 60
    EP  - 68
    PB  - Science Publishing Group
    SN  - 2326-960X
    UR  - https://doi.org/10.11648/j.ijepe.20130202.15
    AB  - In the present study, the coupled thermoelastic analysis was carried out for determining the temperature, radial displacement, and radial and circumferential stress distributions of a classical cylinder, and later a reactor pressure vessel exposed to an inner moderator pressure and thermal loads. For the solution, a critical region is analyzed to imitate the effect of the outlet nozzles of the reactor pressure vessel. In order to certify our computational code, the temperature, radial displacement, radial stress, and circumferential stress distributions were also calculated using finite element (FE) method. It was concluded that the analytical results were in good agreement with the computational ones for the classic cylinder. The effect of thermomechanical loads on the temperature, displacement, and stress distributions was discussed in detail. This presented analysis proposes satisfactory results to design reactor pressure vessels.
    VL  - 2
    IS  - 2
    ER  - 

    Copy | Download

  • Sections