Wind energy is one of the most widely used renewable energy resources. Large amounts of research and resources are being spent today in order to harness the energy from wind effectively. Large wind turbines are erected at windy site and delivering satisfactory performance. Small wind turbines are erected in low wind regions and are in development stage. Research activities are increasing at a significant rate in the field of small wind turbines. World wind energy association forecast considerable development in this field. To face the wind directions, small wind turbines are using mechanical systems in the form of tail. The conventional tail changes the direction of the wind turbine to accommodate the variation of the incoming direction of winds. Quick and steady response is important as per change in wind directions. It has considerable effect on the wind turbine performance. The tails are having different shapes, but literature is not available about it. Different manufacturers used different tail shapes for their model, but the effect of tail shapes has not been studied yet. Hence, it is necessary to study the effect of tail shapes on the performance of wind turbine. This paper presents the effect of tail shapes on the performance of wind turbine. In this work three different tail shapes; rectangular, trapezoidal and triangular are considered. The yawing performance for these tail shapes using CFD analysis is carried out and presented in this paper.
| Published in |
International Journal of Energy and Power Engineering (Volume 4, Issue 5-1)
This article belongs to the Special Issue Energy Systems and Developments |
| DOI | 10.11648/j.ijepe.s.2015040501.16 |
| Page(s) | 38-42 |
| Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
| Copyright |
Copyright © The Author(s), 2024. Published by Science Publishing Group |
CFD, Small Wind Turbine, Tail Shape, Yawing
| [1] | U.S. Gov, Dept. of Energy. Energy Information Administration - Official Energy Statistics from the U.S. Government. |
| [2] | http://www.eia.doe.gov/, 2009. |
| [3] | Stefan Gsanger and Jean-Daniel Pitteloud, World wind energy association 2015 report. 1-39p.www.wwindea.org |
| [4] | Khan B H. Non-Conventional Energy Resources, Tata McGraw-Hill, New Delhi. 2006. |
| [5] | Rakesh Das. Energy Conversion Systems. New Age International Publishers, Delhi. 2006. |
| [6] | Burton T, Jenkins N, Sharpe D and Bossanyi E Wind Energy Handbook (Wiley) ISBN 0470699752, 2011 |
| [7] | Clausen P. D. and Wood D. H. Renewable Energy Journal 16.1999. 922-927p. |
| [8] | Wood. D. Small Wind Turbine Analysis, Design and Application Springer-Verlag London Limited, ISSN 1865-3529,2011 |
| [9] | Nielsen E. Yawing device and method of controlling it. USPatent 4966525A, 1990 |
| [10] | Mayer C, Bechly M E and Wood DH. The starting behaviour of a small horizontal-axis wind turbine. Renewable Energy 2001. |
| [11] | Hugh Piggott. Wind power workshop, Springer |
| [12] | A.K. Wright and D.H. Wood, “The starting and low wind speed behaviour of a small horizontal axis wind turbine”, Journal of Wind Engineering and Industrial Aerodynamics. September 2004. |
APA Style
Nikhil C. Raikar, Sandip A. Kale. (2015). Effect of Tail Shapes on Yawing Performance of Micro Wind Turbine. International Journal of Energy and Power Engineering, 4(5-1), 38-42. https://doi.org/10.11648/j.ijepe.s.2015040501.16
ACS Style
Nikhil C. Raikar; Sandip A. Kale. Effect of Tail Shapes on Yawing Performance of Micro Wind Turbine. Int. J. Energy Power Eng. 2015, 4(5-1), 38-42. doi: 10.11648/j.ijepe.s.2015040501.16
Share This Article
Twitter
Linked In
Facebook
Copy
Download@article{10.11648/j.ijepe.s.2015040501.16,
author = {Nikhil C. Raikar and Sandip A. Kale},
title = {Effect of Tail Shapes on Yawing Performance of Micro Wind Turbine},
journal = {International Journal of Energy and Power Engineering},
volume = {4},
number = {5-1},
pages = {38-42},
doi = {10.11648/j.ijepe.s.2015040501.16},
url = {https://doi.org/10.11648/j.ijepe.s.2015040501.16},
eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijepe.s.2015040501.16},
abstract = {Wind energy is one of the most widely used renewable energy resources. Large amounts of research and resources are being spent today in order to harness the energy from wind effectively. Large wind turbines are erected at windy site and delivering satisfactory performance. Small wind turbines are erected in low wind regions and are in development stage. Research activities are increasing at a significant rate in the field of small wind turbines. World wind energy association forecast considerable development in this field. To face the wind directions, small wind turbines are using mechanical systems in the form of tail. The conventional tail changes the direction of the wind turbine to accommodate the variation of the incoming direction of winds. Quick and steady response is important as per change in wind directions. It has considerable effect on the wind turbine performance. The tails are having different shapes, but literature is not available about it. Different manufacturers used different tail shapes for their model, but the effect of tail shapes has not been studied yet. Hence, it is necessary to study the effect of tail shapes on the performance of wind turbine. This paper presents the effect of tail shapes on the performance of wind turbine. In this work three different tail shapes; rectangular, trapezoidal and triangular are considered. The yawing performance for these tail shapes using CFD analysis is carried out and presented in this paper.},
year = {2015}
}
TY - JOUR T1 - Effect of Tail Shapes on Yawing Performance of Micro Wind Turbine AU - Nikhil C. Raikar AU - Sandip A. Kale Y1 - 2015/09/02 PY - 2015 N1 - https://doi.org/10.11648/j.ijepe.s.2015040501.16 DO - 10.11648/j.ijepe.s.2015040501.16 T2 - International Journal of Energy and Power Engineering JF - International Journal of Energy and Power Engineering JO - International Journal of Energy and Power Engineering SP - 38 EP - 42 PB - Science Publishing Group SN - 2326-960X UR - https://doi.org/10.11648/j.ijepe.s.2015040501.16 AB - Wind energy is one of the most widely used renewable energy resources. Large amounts of research and resources are being spent today in order to harness the energy from wind effectively. Large wind turbines are erected at windy site and delivering satisfactory performance. Small wind turbines are erected in low wind regions and are in development stage. Research activities are increasing at a significant rate in the field of small wind turbines. World wind energy association forecast considerable development in this field. To face the wind directions, small wind turbines are using mechanical systems in the form of tail. The conventional tail changes the direction of the wind turbine to accommodate the variation of the incoming direction of winds. Quick and steady response is important as per change in wind directions. It has considerable effect on the wind turbine performance. The tails are having different shapes, but literature is not available about it. Different manufacturers used different tail shapes for their model, but the effect of tail shapes has not been studied yet. Hence, it is necessary to study the effect of tail shapes on the performance of wind turbine. This paper presents the effect of tail shapes on the performance of wind turbine. In this work three different tail shapes; rectangular, trapezoidal and triangular are considered. The yawing performance for these tail shapes using CFD analysis is carried out and presented in this paper. VL - 4 IS - 5-1 ER -
Information
Email: