International Journal of Energy and Power Engineering

| Peer-Reviewed |

Thermo-Economic Analysis of Gas Turbines Power Plants with Cooled Air Intake

Received: 16 May 2015    Accepted: 08 July 2015    Published: 17 July 2015
Views:       Downloads:

Share This Article

Abstract

Gas turbine (GT) power plants operating in arid climates suffer from a decrease in power output during the hot summer months. Cooling the intake air enables the operators to mitigate this shortcoming. In this study, an energy analysis of a GT Brayton cycle coupled to a refrigeration cycle shows a promise of increasing the power output with a slight decrease in thermal efficiency. A thermo-economic algorithm is also developed and applied to the Hitachi MS700 GT open cycle plant at the industrial city of Yanbu, the Kingdom of Saudi Arabia (latitude 24°05” N and longitude 38° E). The results show that the power output enhancement depends on the degree of chilling the air intake to the compressor. Moreover, maximum power gain ratio is 15.46% whilst a slight decrease in thermal efficiency is of 12.25% for this case study. The study estimates the cost of the needed air cooling system. The cost function takes into consideration the time-dependent meteorological data, operation characteristics of the GT and air cooler, the operation and maintenance costs, interest rate, and lifetime. The study also evaluates the profit of adding the air cooling system for different electricity tariff.

DOI 10.11648/j.ijepe.20150404.13
Published in International Journal of Energy and Power Engineering (Volume 4, Issue 4, August 2015)
Page(s) 205-215
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Gas Turbine, Power Boosting, Hot Climate, Air-Cooling, Mechanical Refrigeration

References
[1] Mohapatra AK, Sanjay. Comparative analysis of inlet air cooling techniques integrated to cooled gas turbine plant. J Energy Inst 2014; In press: 1-15.
[2] Cortes CPE, Williams D. Gas turbine inlet cooling techniques: An overview of current technology; Dec. 2004. Proc Power GEN, Las Vegas Nevada.
[3] Wang T, Li X, Pinniti V. Simulation of mist transport for gas turbine inlet air-cooling; Nov. 2009. ASME Int Mec Eng congress, Anaheim, Ca, USA,
[4] Ameri M, Nabati H. Keshtgar A. Gas turbine power augmentation using fog inlet cooling system; 2004. Proc ESDA04 7th Biennial Conf Eng Syst Des Anal, Manchester UK.
[5] Ameri M, Shahbazian HR, Nabizadeh M. Comparison of evaporative inlet air cooling systems to enhance the gas turbine generated power. Int J Energy Res 2007; 31: 483-503
[6] Jonsson M, Yan J. Humidified gas turbines - A review of proposed and implemented cycles. Energy 2005; 30: 1013-1078.
[7] Alhazmy MM. Najjar YS. Augmentation of gas turbine performance using air coolers. App Therm Eng 2004; 24: 415-429.
[8] Alhazmy MM, Jassim RK, Zaki GM. Performance enhancement of gas turbines by inlet air-cooling in hot and humid climates. Int J Energy Res 2006; 30:777-797.
[9] Sanaye S, Tahani M. Analysis of gas turbine operating parameters with inlet fogging and wet compression processes. Appl Therm Eng 2010; 30:234-244.
[10] Tillman TC, Blacklund DW, Penton JD. Analyzing the potential for condensate carry-over from a gas cooling turbine inlet cooling coil. ASHRAE Trans 2005; 111(Part 2) DE-05-6-3: 555-563.
[11] Chaker M, Meher-Homji CB, Mee M. Inlet fogging of gas turbine engines - Part B: Fog droplet sizing analysis, nozzle types, measurement and testing. ASME Proc Turbo Expo 2002; 4:429-442.
[12] Chaker M, Meher-Homji CB, Mee M. Inlet fogging of gas turbine engines - Part C: fog behavior in inlet ducts, cfd analysis and wind tunnel experiments. ASME Proc Turbo Expo 2002; 4:443-455.
[13] Chaker M, Meher-Homji CB, Mee M, Nicholson A. Inlet fogging of gas turbine engines detailed climatic analysis of gas turbine evaporation cooling potential in the USA. J Eng Gas Turbine Power 2003; 125:300-309.
[14] Homji-Meher BC, Mee T, Thomas R. Inlet fogging of gas turbine engines, Part B: Droplet sizing analysis nozzle types, measurement and testing; June 2002. Proc ASME Turbo Expo, Amsterdam, Netherlands.
[15] Gajjar H, Chaker M. Inlet fogging for a 655 MW combined cycle power plant-design, implementation and operating experience. ASME Proc of Turbo Expo 2003; 2:853-860.
[16] Elliot J. Chilled air takes weather out of equation. Diesel and gas turbine world wide; 2001, p. 49-96.
[17] Yang C, Yang Z, Cai R. Analytical method for evaluation of gas turbine inlet air cooling in combined cycle power plant. Appl Energy 2009; 86:848–856
[18] Ondryas IS, Wilson DA, Kawamoto N, Haub GL. Options in gas turbine power augmentation using inlet air chilling. Eng Gas Turbine and Power 1991;113: 203-211.
[19] Punwani D, Pierson T, Sanchez C, Ryan W. Combustion turbine inlet air cooling using absorption chillers some technical and economical analysis and case summaries. ASHRAE Annual Meeting; June 1999. Seattle, Washington.
[20] Kakarus E, Doukelis A, Karellas S. Compressor intake air cooling in gas turbine plants. Energy 2004; 29:2347-2358.
[21] Stewart W, Patrick A. Air temperature depression and potential icing at the inlet of stationary combustion turbines. ASHRAE Trans 2000; 106:318-327.
[22] Farzaneh-Gord M, Deymi-Dashtebayaz M. A new approach for enhancing performance of a gas turbine (case study: Khangiran refinery). Appl Energy 2009; 86: 2750-2759
[23] Zaki GM, Jassim RK, Alhazmy MM. Brayton refrigeration Cycle for gas turbine inlet air cooling. Int J Energy Res 2007; 31:1292-1306.
[24] Jassim RK, Zaki GM, Alhazmy MM. Energy and exergy analysis of reverse Brayton refrigerator for gas turbine power boosting. Int J Exergy 2009; 6:143-165.
[25] Khan JR, Lear WE, Sherif SA, Crittenden JF. Performance of a novel combined cooling and power gas turbine with water harvesting. ASME J Eng Gas Turbines Power; 2008; 130: 041702
[26] Erickson DC. Aqua absorption turbine inlet cooling; Nov. 2003. Proc IMEC 03, ASME Int Mech Eng Congress Exposition, Washington DC
[27] Erickson DC. Power fogger cycle. ASHRAE Transactions 2005; 111:551-554.
[28] Gareta R, Romeo LM, Gil A. Methodology for the economic evaluation of gas turbine air cooling systems in combined cycle applications. Energy 2004; 29:1805-1818.
[29] Hasnain SM, Alawaji SH, Al-Ibrahim AM, Smiai MS. Prospects of cool thermal storage utilization in Saudi Arabia. Energy Convers Manag 2000; 41:1829-1839.
[30] Shirazi A, Najafi B, Aminyavari M, Rinaldi F, Taylor RA. Thermal-economic-environmental analysis and multi-objective optimization of an ice thermal energy storage system for gas turbine cycle inlet air cooling. Energy 2014; 69:212-226
[31] Cleland AJ, Cleland DJ, White SD. Cost-Effective Refrigeration, Short course notes, Institute of Technology and Engineering, Massey University, New Zealand; 2000
[32] Dossat RJ. Principles of Refrigeration. New York: John Wiley and Sons; 1997.
[33] Klein KA, Alvarado FL. EES-Engineering Equation Solver, Version 6.648 ND, F-Chart Software, Middleton, WI; 2004.
[34] Kotas TJ. The exergy method of thermal plant analysis. Elsevier; 1995.
[35] McQuiston FC, Parker JD, Spilter JD. Heating, ventilating and air conditioning: Design and analysis. 6th ed. New Yorh: John Wily; 2005.
Author Information
  • Saudi Electric Services Polytechnic (SESP), Baish, Jazan Province, Kingdom of Saudi Arabia

  • Mechanical Engineering, King Abdulaziz University, Jeddah, Saudi Arabia

  • Mechanical Engineering, King Abdulaziz University, Jeddah, Saudi Arabia

  • Mechanical Engineering, King Abdulaziz University, Jeddah, Saudi Arabia

Cite This Article
  • APA Style

    Rahim Jassim, Galal Zaki, Badr Habeebullah, Majed Alhazmy. (2015). Thermo-Economic Analysis of Gas Turbines Power Plants with Cooled Air Intake. International Journal of Energy and Power Engineering, 4(4), 205-215. https://doi.org/10.11648/j.ijepe.20150404.13

    Copy | Download

    ACS Style

    Rahim Jassim; Galal Zaki; Badr Habeebullah; Majed Alhazmy. Thermo-Economic Analysis of Gas Turbines Power Plants with Cooled Air Intake. Int. J. Energy Power Eng. 2015, 4(4), 205-215. doi: 10.11648/j.ijepe.20150404.13

    Copy | Download

    AMA Style

    Rahim Jassim, Galal Zaki, Badr Habeebullah, Majed Alhazmy. Thermo-Economic Analysis of Gas Turbines Power Plants with Cooled Air Intake. Int J Energy Power Eng. 2015;4(4):205-215. doi: 10.11648/j.ijepe.20150404.13

    Copy | Download

  • @article{10.11648/j.ijepe.20150404.13,
      author = {Rahim Jassim and Galal Zaki and Badr Habeebullah and Majed Alhazmy},
      title = {Thermo-Economic Analysis of Gas Turbines Power Plants with Cooled Air Intake},
      journal = {International Journal of Energy and Power Engineering},
      volume = {4},
      number = {4},
      pages = {205-215},
      doi = {10.11648/j.ijepe.20150404.13},
      url = {https://doi.org/10.11648/j.ijepe.20150404.13},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ijepe.20150404.13},
      abstract = {Gas turbine (GT) power plants operating in arid climates suffer from a decrease in power output during the hot summer months. Cooling the intake air enables the operators to mitigate this shortcoming. In this study, an energy analysis of a GT Brayton cycle coupled to a refrigeration cycle shows a promise of increasing the power output with a slight decrease in thermal efficiency. A thermo-economic algorithm is also developed and applied to the Hitachi MS700 GT open cycle plant at the industrial city of Yanbu, the Kingdom of Saudi Arabia (latitude 24°05” N and longitude 38° E). The results show that the power output enhancement depends on the degree of chilling the air intake to the compressor. Moreover, maximum power gain ratio is 15.46% whilst a slight decrease in thermal efficiency is of 12.25% for this case study. The study estimates the cost of the needed air cooling system. The cost function takes into consideration the time-dependent meteorological data, operation characteristics of the GT and air cooler, the operation and maintenance costs, interest rate, and lifetime. The study also evaluates the profit of adding the air cooling system for different electricity tariff.},
     year = {2015}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Thermo-Economic Analysis of Gas Turbines Power Plants with Cooled Air Intake
    AU  - Rahim Jassim
    AU  - Galal Zaki
    AU  - Badr Habeebullah
    AU  - Majed Alhazmy
    Y1  - 2015/07/17
    PY  - 2015
    N1  - https://doi.org/10.11648/j.ijepe.20150404.13
    DO  - 10.11648/j.ijepe.20150404.13
    T2  - International Journal of Energy and Power Engineering
    JF  - International Journal of Energy and Power Engineering
    JO  - International Journal of Energy and Power Engineering
    SP  - 205
    EP  - 215
    PB  - Science Publishing Group
    SN  - 2326-960X
    UR  - https://doi.org/10.11648/j.ijepe.20150404.13
    AB  - Gas turbine (GT) power plants operating in arid climates suffer from a decrease in power output during the hot summer months. Cooling the intake air enables the operators to mitigate this shortcoming. In this study, an energy analysis of a GT Brayton cycle coupled to a refrigeration cycle shows a promise of increasing the power output with a slight decrease in thermal efficiency. A thermo-economic algorithm is also developed and applied to the Hitachi MS700 GT open cycle plant at the industrial city of Yanbu, the Kingdom of Saudi Arabia (latitude 24°05” N and longitude 38° E). The results show that the power output enhancement depends on the degree of chilling the air intake to the compressor. Moreover, maximum power gain ratio is 15.46% whilst a slight decrease in thermal efficiency is of 12.25% for this case study. The study estimates the cost of the needed air cooling system. The cost function takes into consideration the time-dependent meteorological data, operation characteristics of the GT and air cooler, the operation and maintenance costs, interest rate, and lifetime. The study also evaluates the profit of adding the air cooling system for different electricity tariff.
    VL  - 4
    IS  - 4
    ER  - 

    Copy | Download

  • Sections