International Journal of Energy and Power Engineering

| Peer-Reviewed |

Magnetic Loss Inside Solid and Laminated Components under Extreme Excitations

Received: 24 August 2015    Accepted: 25 August 2015    Published: 29 September 2015
Views:       Downloads:

Share This Article

Abstract

The modeling and numerical analysis of the magnetic loss inside components under multi-harmonic and/or DC-biasing excitations are increasingly of concern in large and special electromagnetic devices. This paper aims to investigate efficient and reliable approaches to determine the magnetic losses inside both the solid and laminated components under such extreme excitations. All the proposed approaches presented in the paper are experimentally validated.

DOI 10.11648/j.ijepe.s.2016050101.13
Published in International Journal of Energy and Power Engineering (Volume 5, Issue 1-1, February 2016)

This article belongs to the Special Issue Numerical Analysis, Material Modeling and Validation for Magnetic Losses in Electromagnetic Devices

Page(s) 21-30
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2024. Published by Science Publishing Group

Keywords

Benchmark Model, Components, Device-Based Model, Experimental Validation, Extreme Excitation, Finite Element Analysis(FEA), Magnetic Loss, Magnetic Material, Working Magnetic Properties

References
[1] F. Fiorillo and A. Novikov, “An improved approach to power losses in magnetic laminations under nonsinusoidal induction waveform,” IEEE Trans. Magn., vol. 26, no.5, pp. 2904-2910, 1990.
[2] T. Sasaki, S. Saiki, and S. Takada, "Magnetic losses of electrical iron sheets under ac magnetization superimposed with higher harmonics", IEEE Trans. J. Magn. Japan, vol. 7, no. 1, pp. 64-74, 1992.
[3] E. Barbisio, F. Fiorillo, and C. Ragusa: “Predicting loss in magnetic steels under arbitrary induction waveform and with minor hysteresis loops”, IEEE Trans. Magn., vol. 40, no.4, pp.1810-1819, 2004.
[4] X. Zhao, J. Lu, L. Li, Z. Cheng, et al, “Analysis of the DC bias phenomenon by the harmonic balance finite element method,” IEEE Trans. Power Delivery, vol.26. no.1, pp.475-485, 2011.
[5] Y.Yao, C.Koh, G.Ni, and D.Xie, “3-D nonlinear transient eddy current, calculation of online power transformer under DC bias,” IEEE Trans. Magn., vol.41, no.5, pp.1840-1843, 2005.
[6] T. Moses and J. Leicht, “Prediction and Measurement of losses under PWM Magnetisation conditions in electrical steels with different silicon content,” Journal of Applied Physics 97, 10R507 (2005).
[7] IEC TR 62383, First edition 2006-01, Determination of magnetic loss under magnetic polarization waveforms including higher harmonic components. Measurement, modelling and calculation methods.
[8] Z. Cheng, N. Takahashi, B. Forghani, G. Gilbert, J. Zhang, L. Liu, Y. Fan, X. Zhang, Y. Du, J. Wang, and C. Jiao, “Analysis and measurements of iron loss and flux inside silicon steel laminations,” IEEE Trans. Magn.,vo.45, no.3, pp.1222-1225, 2009.
[9] Z. Cheng, N. Takahashi, B. Forghani, et al, “Effect of excitation patterns on both iron loss and flux in solid and laminated steel configurations,” IEEE Trans. Magn., vol.46, no.8, pp.3185-3188, 2010.
[10] Y. Zhang, Z. Peng, D. Xie, and B. Bai, “Effect of different magnetization curves on simulation for transformer core loss under DC bias,” Trans., China Electrotechnical Society, vo.29, no.5, pp.43-48, 2014.
[11] Z. Cheng, N. Takahashi, B. Forghani, Y. Du, Y. Fan, L. Liu, and H. Wang, “Effect of variation of B-H properties on both iron loss and flux in silicon steel lamination,” IEEE Trans. Magn., vol.47, no.5, pp.1346-1349, 2011.
[12] Z. Cheng, N. Takahashi, B. Forghani, et al, “3-D finite element modeling and validation of power frequency multi-shielding effect,” IEEE Trans. Magn., vol.48, no.2, pp.243-246, 2012.
[13] Z. Cheng, N. Takahashi, B. Forghani, et al, “Electromagnetic and Thermal Field Modeling and Application in Electrical Engineering,” (in Chinese), ISBN 978-7-03-023561-9, Science Press, Beijing, 2009.
[14] IEC 60404-6, Magnetic materials- Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens.
[15] TEAM Benchmark Problems (no.1-n0.34) [on line] available: www.compumag.org/team.
[16] Z. Cheng, N. Takahashi, B. Forghani, L. Liu, Y. Fan, T. Liu, Q.Hu, S. Gao, J. Zhang, and X. Wang, “Extended progress in TEAM Problem 21 family,” COMPEL, 33, 1/2, pp.234-244, 2014.
[17] Z. Cheng, B. Forghani, D. Lowther, Y. Liu, Z. Zhao, T. Liu, Y. Fan, and G. Han, "Stray-field loss modeling under hybrid excitation in smoothing reactors", presented at 20th international Conference on the Computation of Electromagnetic Fields(Compumag), June 28-July 2, 2015, Montreal, Canada.
[18] Z. Cheng, N. Takahashi, B. Forghani, A. Moses, P. Anderson, Y. Fan, T. Liu, X. Wang, Z. Zhao, and L. Liu, “Modeling of magnetic properties of GO electrical steel based on Epstein combination and loss data weighted processing,” IEEE Trans. Magn., vol.50, no.1, 6300209, 2014.
Author Information
  • Institute of Power Transmission and Transformation Technology, Baobian Electric Co., Ltd, Baoding, China

  • Infolytica Corporation, Place du Parc, Montreal, Canada

  • Institute of Power Transmission and Transformation Technology, Baobian Electric Co., Ltd, Baoding, China; State Grid Smart Grid Research Institute, Beijing, China

  • Institute of Power Transmission and Transformation Technology, Baobian Electric Co., Ltd, Baoding, China

  • Institute of Power Transmission and Transformation Technology, Baobian Electric Co., Ltd, Baoding, China

  • School of Electrical Engineering, Hebei University of Technology, Tianjin, China

Cite This Article
  • APA Style

    Zhiguang Cheng, Behzad Forghani, Yang Liu, Yana Fan, Tao Liu, et al. (2015). Magnetic Loss Inside Solid and Laminated Components under Extreme Excitations. International Journal of Energy and Power Engineering, 5(1-1), 21-30. https://doi.org/10.11648/j.ijepe.s.2016050101.13

    Copy | Download

    ACS Style

    Zhiguang Cheng; Behzad Forghani; Yang Liu; Yana Fan; Tao Liu, et al. Magnetic Loss Inside Solid and Laminated Components under Extreme Excitations. Int. J. Energy Power Eng. 2015, 5(1-1), 21-30. doi: 10.11648/j.ijepe.s.2016050101.13

    Copy | Download

    AMA Style

    Zhiguang Cheng, Behzad Forghani, Yang Liu, Yana Fan, Tao Liu, et al. Magnetic Loss Inside Solid and Laminated Components under Extreme Excitations. Int J Energy Power Eng. 2015;5(1-1):21-30. doi: 10.11648/j.ijepe.s.2016050101.13

    Copy | Download

  • @article{10.11648/j.ijepe.s.2016050101.13,
      author = {Zhiguang Cheng and Behzad Forghani and Yang Liu and Yana Fan and Tao Liu and Zhigang Zhao},
      title = {Magnetic Loss Inside Solid and Laminated Components under Extreme Excitations},
      journal = {International Journal of Energy and Power Engineering},
      volume = {5},
      number = {1-1},
      pages = {21-30},
      doi = {10.11648/j.ijepe.s.2016050101.13},
      url = {https://doi.org/10.11648/j.ijepe.s.2016050101.13},
      eprint = {https://download.sciencepg.com/pdf/10.11648.j.ijepe.s.2016050101.13},
      abstract = {The modeling and numerical analysis of the magnetic loss inside components under multi-harmonic and/or DC-biasing excitations are increasingly of concern in large and special electromagnetic devices. This paper aims to investigate efficient and reliable approaches to determine the magnetic losses inside both the solid and laminated components under such extreme excitations. All the proposed approaches presented in the paper are experimentally validated.},
     year = {2015}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Magnetic Loss Inside Solid and Laminated Components under Extreme Excitations
    AU  - Zhiguang Cheng
    AU  - Behzad Forghani
    AU  - Yang Liu
    AU  - Yana Fan
    AU  - Tao Liu
    AU  - Zhigang Zhao
    Y1  - 2015/09/29
    PY  - 2015
    N1  - https://doi.org/10.11648/j.ijepe.s.2016050101.13
    DO  - 10.11648/j.ijepe.s.2016050101.13
    T2  - International Journal of Energy and Power Engineering
    JF  - International Journal of Energy and Power Engineering
    JO  - International Journal of Energy and Power Engineering
    SP  - 21
    EP  - 30
    PB  - Science Publishing Group
    SN  - 2326-960X
    UR  - https://doi.org/10.11648/j.ijepe.s.2016050101.13
    AB  - The modeling and numerical analysis of the magnetic loss inside components under multi-harmonic and/or DC-biasing excitations are increasingly of concern in large and special electromagnetic devices. This paper aims to investigate efficient and reliable approaches to determine the magnetic losses inside both the solid and laminated components under such extreme excitations. All the proposed approaches presented in the paper are experimentally validated.
    VL  - 5
    IS  - 1-1
    ER  - 

    Copy | Download

  • Sections